[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PULL 02/29] hw/misc/zynq_slcr: use standard register defin
|
From: |
Peter Maydell |
|
Subject: |
[Qemu-devel] [PULL 02/29] hw/misc/zynq_slcr: use standard register definition |
|
Date: |
Fri, 16 Aug 2019 14:16:52 +0100 |
From: Damien Hedde <address@hidden>
Replace the zynq_slcr registers enum and macros using the
hw/registerfields.h macros.
Signed-off-by: Damien Hedde <address@hidden>
Reviewed-by: Philippe Mathieu-Daudé <address@hidden>
Reviewed-by: Alistair Francis <address@hidden>
Message-id: address@hidden
Signed-off-by: Peter Maydell <address@hidden>
---
hw/misc/zynq_slcr.c | 450 ++++++++++++++++++++++----------------------
1 file changed, 225 insertions(+), 225 deletions(-)
diff --git a/hw/misc/zynq_slcr.c b/hw/misc/zynq_slcr.c
index 6b51ae5ff17..dd766a67792 100644
--- a/hw/misc/zynq_slcr.c
+++ b/hw/misc/zynq_slcr.c
@@ -21,6 +21,7 @@
#include "sysemu/sysemu.h"
#include "qemu/log.h"
#include "qemu/module.h"
+#include "hw/registerfields.h"
#ifndef ZYNQ_SLCR_ERR_DEBUG
#define ZYNQ_SLCR_ERR_DEBUG 0
@@ -36,138 +37,135 @@
#define XILINX_LOCK_KEY 0x767b
#define XILINX_UNLOCK_KEY 0xdf0d
-#define R_PSS_RST_CTRL_SOFT_RST 0x1
+REG32(SCL, 0x000)
+REG32(LOCK, 0x004)
+REG32(UNLOCK, 0x008)
+REG32(LOCKSTA, 0x00c)
-enum {
- SCL = 0x000 / 4,
- LOCK,
- UNLOCK,
- LOCKSTA,
+REG32(ARM_PLL_CTRL, 0x100)
+REG32(DDR_PLL_CTRL, 0x104)
+REG32(IO_PLL_CTRL, 0x108)
+REG32(PLL_STATUS, 0x10c)
+REG32(ARM_PLL_CFG, 0x110)
+REG32(DDR_PLL_CFG, 0x114)
+REG32(IO_PLL_CFG, 0x118)
- ARM_PLL_CTRL = 0x100 / 4,
- DDR_PLL_CTRL,
- IO_PLL_CTRL,
- PLL_STATUS,
- ARM_PLL_CFG,
- DDR_PLL_CFG,
- IO_PLL_CFG,
-
- ARM_CLK_CTRL = 0x120 / 4,
- DDR_CLK_CTRL,
- DCI_CLK_CTRL,
- APER_CLK_CTRL,
- USB0_CLK_CTRL,
- USB1_CLK_CTRL,
- GEM0_RCLK_CTRL,
- GEM1_RCLK_CTRL,
- GEM0_CLK_CTRL,
- GEM1_CLK_CTRL,
- SMC_CLK_CTRL,
- LQSPI_CLK_CTRL,
- SDIO_CLK_CTRL,
- UART_CLK_CTRL,
- SPI_CLK_CTRL,
- CAN_CLK_CTRL,
- CAN_MIOCLK_CTRL,
- DBG_CLK_CTRL,
- PCAP_CLK_CTRL,
- TOPSW_CLK_CTRL,
+REG32(ARM_CLK_CTRL, 0x120)
+REG32(DDR_CLK_CTRL, 0x124)
+REG32(DCI_CLK_CTRL, 0x128)
+REG32(APER_CLK_CTRL, 0x12c)
+REG32(USB0_CLK_CTRL, 0x130)
+REG32(USB1_CLK_CTRL, 0x134)
+REG32(GEM0_RCLK_CTRL, 0x138)
+REG32(GEM1_RCLK_CTRL, 0x13c)
+REG32(GEM0_CLK_CTRL, 0x140)
+REG32(GEM1_CLK_CTRL, 0x144)
+REG32(SMC_CLK_CTRL, 0x148)
+REG32(LQSPI_CLK_CTRL, 0x14c)
+REG32(SDIO_CLK_CTRL, 0x150)
+REG32(UART_CLK_CTRL, 0x154)
+REG32(SPI_CLK_CTRL, 0x158)
+REG32(CAN_CLK_CTRL, 0x15c)
+REG32(CAN_MIOCLK_CTRL, 0x160)
+REG32(DBG_CLK_CTRL, 0x164)
+REG32(PCAP_CLK_CTRL, 0x168)
+REG32(TOPSW_CLK_CTRL, 0x16c)
#define FPGA_CTRL_REGS(n, start) \
- FPGA ## n ## _CLK_CTRL = (start) / 4, \
- FPGA ## n ## _THR_CTRL, \
- FPGA ## n ## _THR_CNT, \
- FPGA ## n ## _THR_STA,
- FPGA_CTRL_REGS(0, 0x170)
- FPGA_CTRL_REGS(1, 0x180)
- FPGA_CTRL_REGS(2, 0x190)
- FPGA_CTRL_REGS(3, 0x1a0)
+ REG32(FPGA ## n ## _CLK_CTRL, (start)) \
+ REG32(FPGA ## n ## _THR_CTRL, (start) + 0x4)\
+ REG32(FPGA ## n ## _THR_CNT, (start) + 0x8)\
+ REG32(FPGA ## n ## _THR_STA, (start) + 0xc)
+FPGA_CTRL_REGS(0, 0x170)
+FPGA_CTRL_REGS(1, 0x180)
+FPGA_CTRL_REGS(2, 0x190)
+FPGA_CTRL_REGS(3, 0x1a0)
- BANDGAP_TRIP = 0x1b8 / 4,
- PLL_PREDIVISOR = 0x1c0 / 4,
- CLK_621_TRUE,
+REG32(BANDGAP_TRIP, 0x1b8)
+REG32(PLL_PREDIVISOR, 0x1c0)
+REG32(CLK_621_TRUE, 0x1c4)
- PSS_RST_CTRL = 0x200 / 4,
- DDR_RST_CTRL,
- TOPSW_RESET_CTRL,
- DMAC_RST_CTRL,
- USB_RST_CTRL,
- GEM_RST_CTRL,
- SDIO_RST_CTRL,
- SPI_RST_CTRL,
- CAN_RST_CTRL,
- I2C_RST_CTRL,
- UART_RST_CTRL,
- GPIO_RST_CTRL,
- LQSPI_RST_CTRL,
- SMC_RST_CTRL,
- OCM_RST_CTRL,
- FPGA_RST_CTRL = 0x240 / 4,
- A9_CPU_RST_CTRL,
+REG32(PSS_RST_CTRL, 0x200)
+ FIELD(PSS_RST_CTRL, SOFT_RST, 0, 1)
+REG32(DDR_RST_CTRL, 0x204)
+REG32(TOPSW_RESET_CTRL, 0x208)
+REG32(DMAC_RST_CTRL, 0x20c)
+REG32(USB_RST_CTRL, 0x210)
+REG32(GEM_RST_CTRL, 0x214)
+REG32(SDIO_RST_CTRL, 0x218)
+REG32(SPI_RST_CTRL, 0x21c)
+REG32(CAN_RST_CTRL, 0x220)
+REG32(I2C_RST_CTRL, 0x224)
+REG32(UART_RST_CTRL, 0x228)
+REG32(GPIO_RST_CTRL, 0x22c)
+REG32(LQSPI_RST_CTRL, 0x230)
+REG32(SMC_RST_CTRL, 0x234)
+REG32(OCM_RST_CTRL, 0x238)
+REG32(FPGA_RST_CTRL, 0x240)
+REG32(A9_CPU_RST_CTRL, 0x244)
- RS_AWDT_CTRL = 0x24c / 4,
- RST_REASON,
+REG32(RS_AWDT_CTRL, 0x24c)
+REG32(RST_REASON, 0x250)
- REBOOT_STATUS = 0x258 / 4,
- BOOT_MODE,
+REG32(REBOOT_STATUS, 0x258)
+REG32(BOOT_MODE, 0x25c)
- APU_CTRL = 0x300 / 4,
- WDT_CLK_SEL,
+REG32(APU_CTRL, 0x300)
+REG32(WDT_CLK_SEL, 0x304)
- TZ_DMA_NS = 0x440 / 4,
- TZ_DMA_IRQ_NS,
- TZ_DMA_PERIPH_NS,
+REG32(TZ_DMA_NS, 0x440)
+REG32(TZ_DMA_IRQ_NS, 0x444)
+REG32(TZ_DMA_PERIPH_NS, 0x448)
- PSS_IDCODE = 0x530 / 4,
+REG32(PSS_IDCODE, 0x530)
- DDR_URGENT = 0x600 / 4,
- DDR_CAL_START = 0x60c / 4,
- DDR_REF_START = 0x614 / 4,
- DDR_CMD_STA,
- DDR_URGENT_SEL,
- DDR_DFI_STATUS,
+REG32(DDR_URGENT, 0x600)
+REG32(DDR_CAL_START, 0x60c)
+REG32(DDR_REF_START, 0x614)
+REG32(DDR_CMD_STA, 0x618)
+REG32(DDR_URGENT_SEL, 0x61c)
+REG32(DDR_DFI_STATUS, 0x620)
- MIO = 0x700 / 4,
+REG32(MIO, 0x700)
#define MIO_LENGTH 54
- MIO_LOOPBACK = 0x804 / 4,
- MIO_MST_TRI0,
- MIO_MST_TRI1,
+REG32(MIO_LOOPBACK, 0x804)
+REG32(MIO_MST_TRI0, 0x808)
+REG32(MIO_MST_TRI1, 0x80c)
- SD0_WP_CD_SEL = 0x830 / 4,
- SD1_WP_CD_SEL,
+REG32(SD0_WP_CD_SEL, 0x830)
+REG32(SD1_WP_CD_SEL, 0x834)
- LVL_SHFTR_EN = 0x900 / 4,
- OCM_CFG = 0x910 / 4,
+REG32(LVL_SHFTR_EN, 0x900)
+REG32(OCM_CFG, 0x910)
- CPU_RAM = 0xa00 / 4,
+REG32(CPU_RAM, 0xa00)
- IOU = 0xa30 / 4,
+REG32(IOU, 0xa30)
- DMAC_RAM = 0xa50 / 4,
+REG32(DMAC_RAM, 0xa50)
- AFI0 = 0xa60 / 4,
- AFI1 = AFI0 + 3,
- AFI2 = AFI1 + 3,
- AFI3 = AFI2 + 3,
+REG32(AFI0, 0xa60)
+REG32(AFI1, 0xa6c)
+REG32(AFI2, 0xa78)
+REG32(AFI3, 0xa84)
#define AFI_LENGTH 3
- OCM = 0xa90 / 4,
+REG32(OCM, 0xa90)
- DEVCI_RAM = 0xaa0 / 4,
+REG32(DEVCI_RAM, 0xaa0)
- CSG_RAM = 0xab0 / 4,
+REG32(CSG_RAM, 0xab0)
- GPIOB_CTRL = 0xb00 / 4,
- GPIOB_CFG_CMOS18,
- GPIOB_CFG_CMOS25,
- GPIOB_CFG_CMOS33,
- GPIOB_CFG_HSTL = 0xb14 / 4,
- GPIOB_DRVR_BIAS_CTRL,
+REG32(GPIOB_CTRL, 0xb00)
+REG32(GPIOB_CFG_CMOS18, 0xb04)
+REG32(GPIOB_CFG_CMOS25, 0xb08)
+REG32(GPIOB_CFG_CMOS33, 0xb0c)
+REG32(GPIOB_CFG_HSTL, 0xb14)
+REG32(GPIOB_DRVR_BIAS_CTRL, 0xb18)
- DDRIOB = 0xb40 / 4,
+REG32(DDRIOB, 0xb40)
#define DDRIOB_LENGTH 14
-};
#define ZYNQ_SLCR_MMIO_SIZE 0x1000
#define ZYNQ_SLCR_NUM_REGS (ZYNQ_SLCR_MMIO_SIZE / 4)
@@ -190,150 +188,152 @@ static void zynq_slcr_reset(DeviceState *d)
DB_PRINT("RESET\n");
- s->regs[LOCKSTA] = 1;
+ s->regs[R_LOCKSTA] = 1;
/* 0x100 - 0x11C */
- s->regs[ARM_PLL_CTRL] = 0x0001A008;
- s->regs[DDR_PLL_CTRL] = 0x0001A008;
- s->regs[IO_PLL_CTRL] = 0x0001A008;
- s->regs[PLL_STATUS] = 0x0000003F;
- s->regs[ARM_PLL_CFG] = 0x00014000;
- s->regs[DDR_PLL_CFG] = 0x00014000;
- s->regs[IO_PLL_CFG] = 0x00014000;
+ s->regs[R_ARM_PLL_CTRL] = 0x0001A008;
+ s->regs[R_DDR_PLL_CTRL] = 0x0001A008;
+ s->regs[R_IO_PLL_CTRL] = 0x0001A008;
+ s->regs[R_PLL_STATUS] = 0x0000003F;
+ s->regs[R_ARM_PLL_CFG] = 0x00014000;
+ s->regs[R_DDR_PLL_CFG] = 0x00014000;
+ s->regs[R_IO_PLL_CFG] = 0x00014000;
/* 0x120 - 0x16C */
- s->regs[ARM_CLK_CTRL] = 0x1F000400;
- s->regs[DDR_CLK_CTRL] = 0x18400003;
- s->regs[DCI_CLK_CTRL] = 0x01E03201;
- s->regs[APER_CLK_CTRL] = 0x01FFCCCD;
- s->regs[USB0_CLK_CTRL] = s->regs[USB1_CLK_CTRL] = 0x00101941;
- s->regs[GEM0_RCLK_CTRL] = s->regs[GEM1_RCLK_CTRL] = 0x00000001;
- s->regs[GEM0_CLK_CTRL] = s->regs[GEM1_CLK_CTRL] = 0x00003C01;
- s->regs[SMC_CLK_CTRL] = 0x00003C01;
- s->regs[LQSPI_CLK_CTRL] = 0x00002821;
- s->regs[SDIO_CLK_CTRL] = 0x00001E03;
- s->regs[UART_CLK_CTRL] = 0x00003F03;
- s->regs[SPI_CLK_CTRL] = 0x00003F03;
- s->regs[CAN_CLK_CTRL] = 0x00501903;
- s->regs[DBG_CLK_CTRL] = 0x00000F03;
- s->regs[PCAP_CLK_CTRL] = 0x00000F01;
+ s->regs[R_ARM_CLK_CTRL] = 0x1F000400;
+ s->regs[R_DDR_CLK_CTRL] = 0x18400003;
+ s->regs[R_DCI_CLK_CTRL] = 0x01E03201;
+ s->regs[R_APER_CLK_CTRL] = 0x01FFCCCD;
+ s->regs[R_USB0_CLK_CTRL] = s->regs[R_USB1_CLK_CTRL] = 0x00101941;
+ s->regs[R_GEM0_RCLK_CTRL] = s->regs[R_GEM1_RCLK_CTRL] = 0x00000001;
+ s->regs[R_GEM0_CLK_CTRL] = s->regs[R_GEM1_CLK_CTRL] = 0x00003C01;
+ s->regs[R_SMC_CLK_CTRL] = 0x00003C01;
+ s->regs[R_LQSPI_CLK_CTRL] = 0x00002821;
+ s->regs[R_SDIO_CLK_CTRL] = 0x00001E03;
+ s->regs[R_UART_CLK_CTRL] = 0x00003F03;
+ s->regs[R_SPI_CLK_CTRL] = 0x00003F03;
+ s->regs[R_CAN_CLK_CTRL] = 0x00501903;
+ s->regs[R_DBG_CLK_CTRL] = 0x00000F03;
+ s->regs[R_PCAP_CLK_CTRL] = 0x00000F01;
/* 0x170 - 0x1AC */
- s->regs[FPGA0_CLK_CTRL] = s->regs[FPGA1_CLK_CTRL] = s->regs[FPGA2_CLK_CTRL]
- = s->regs[FPGA3_CLK_CTRL] = 0x00101800;
- s->regs[FPGA0_THR_STA] = s->regs[FPGA1_THR_STA] = s->regs[FPGA2_THR_STA]
- = s->regs[FPGA3_THR_STA] = 0x00010000;
+ s->regs[R_FPGA0_CLK_CTRL] = s->regs[R_FPGA1_CLK_CTRL]
+ = s->regs[R_FPGA2_CLK_CTRL]
+ = s->regs[R_FPGA3_CLK_CTRL] = 0x00101800;
+ s->regs[R_FPGA0_THR_STA] = s->regs[R_FPGA1_THR_STA]
+ = s->regs[R_FPGA2_THR_STA]
+ = s->regs[R_FPGA3_THR_STA] = 0x00010000;
/* 0x1B0 - 0x1D8 */
- s->regs[BANDGAP_TRIP] = 0x0000001F;
- s->regs[PLL_PREDIVISOR] = 0x00000001;
- s->regs[CLK_621_TRUE] = 0x00000001;
+ s->regs[R_BANDGAP_TRIP] = 0x0000001F;
+ s->regs[R_PLL_PREDIVISOR] = 0x00000001;
+ s->regs[R_CLK_621_TRUE] = 0x00000001;
/* 0x200 - 0x25C */
- s->regs[FPGA_RST_CTRL] = 0x01F33F0F;
- s->regs[RST_REASON] = 0x00000040;
+ s->regs[R_FPGA_RST_CTRL] = 0x01F33F0F;
+ s->regs[R_RST_REASON] = 0x00000040;
- s->regs[BOOT_MODE] = 0x00000001;
+ s->regs[R_BOOT_MODE] = 0x00000001;
/* 0x700 - 0x7D4 */
for (i = 0; i < 54; i++) {
- s->regs[MIO + i] = 0x00001601;
+ s->regs[R_MIO + i] = 0x00001601;
}
for (i = 2; i <= 8; i++) {
- s->regs[MIO + i] = 0x00000601;
+ s->regs[R_MIO + i] = 0x00000601;
}
- s->regs[MIO_MST_TRI0] = s->regs[MIO_MST_TRI1] = 0xFFFFFFFF;
+ s->regs[R_MIO_MST_TRI0] = s->regs[R_MIO_MST_TRI1] = 0xFFFFFFFF;
- s->regs[CPU_RAM + 0] = s->regs[CPU_RAM + 1] = s->regs[CPU_RAM + 3]
- = s->regs[CPU_RAM + 4] = s->regs[CPU_RAM + 7]
- = 0x00010101;
- s->regs[CPU_RAM + 2] = s->regs[CPU_RAM + 5] = 0x01010101;
- s->regs[CPU_RAM + 6] = 0x00000001;
+ s->regs[R_CPU_RAM + 0] = s->regs[R_CPU_RAM + 1] = s->regs[R_CPU_RAM + 3]
+ = s->regs[R_CPU_RAM + 4] = s->regs[R_CPU_RAM + 7]
+ = 0x00010101;
+ s->regs[R_CPU_RAM + 2] = s->regs[R_CPU_RAM + 5] = 0x01010101;
+ s->regs[R_CPU_RAM + 6] = 0x00000001;
- s->regs[IOU + 0] = s->regs[IOU + 1] = s->regs[IOU + 2] = s->regs[IOU + 3]
- = 0x09090909;
- s->regs[IOU + 4] = s->regs[IOU + 5] = 0x00090909;
- s->regs[IOU + 6] = 0x00000909;
+ s->regs[R_IOU + 0] = s->regs[R_IOU + 1] = s->regs[R_IOU + 2]
+ = s->regs[R_IOU + 3] = 0x09090909;
+ s->regs[R_IOU + 4] = s->regs[R_IOU + 5] = 0x00090909;
+ s->regs[R_IOU + 6] = 0x00000909;
- s->regs[DMAC_RAM] = 0x00000009;
+ s->regs[R_DMAC_RAM] = 0x00000009;
- s->regs[AFI0 + 0] = s->regs[AFI0 + 1] = 0x09090909;
- s->regs[AFI1 + 0] = s->regs[AFI1 + 1] = 0x09090909;
- s->regs[AFI2 + 0] = s->regs[AFI2 + 1] = 0x09090909;
- s->regs[AFI3 + 0] = s->regs[AFI3 + 1] = 0x09090909;
- s->regs[AFI0 + 2] = s->regs[AFI1 + 2] = s->regs[AFI2 + 2]
- = s->regs[AFI3 + 2] = 0x00000909;
+ s->regs[R_AFI0 + 0] = s->regs[R_AFI0 + 1] = 0x09090909;
+ s->regs[R_AFI1 + 0] = s->regs[R_AFI1 + 1] = 0x09090909;
+ s->regs[R_AFI2 + 0] = s->regs[R_AFI2 + 1] = 0x09090909;
+ s->regs[R_AFI3 + 0] = s->regs[R_AFI3 + 1] = 0x09090909;
+ s->regs[R_AFI0 + 2] = s->regs[R_AFI1 + 2] = s->regs[R_AFI2 + 2]
+ = s->regs[R_AFI3 + 2] = 0x00000909;
- s->regs[OCM + 0] = 0x01010101;
- s->regs[OCM + 1] = s->regs[OCM + 2] = 0x09090909;
+ s->regs[R_OCM + 0] = 0x01010101;
+ s->regs[R_OCM + 1] = s->regs[R_OCM + 2] = 0x09090909;
- s->regs[DEVCI_RAM] = 0x00000909;
- s->regs[CSG_RAM] = 0x00000001;
+ s->regs[R_DEVCI_RAM] = 0x00000909;
+ s->regs[R_CSG_RAM] = 0x00000001;
- s->regs[DDRIOB + 0] = s->regs[DDRIOB + 1] = s->regs[DDRIOB + 2]
- = s->regs[DDRIOB + 3] = 0x00000e00;
- s->regs[DDRIOB + 4] = s->regs[DDRIOB + 5] = s->regs[DDRIOB + 6]
- = 0x00000e00;
- s->regs[DDRIOB + 12] = 0x00000021;
+ s->regs[R_DDRIOB + 0] = s->regs[R_DDRIOB + 1] = s->regs[R_DDRIOB + 2]
+ = s->regs[R_DDRIOB + 3] = 0x00000e00;
+ s->regs[R_DDRIOB + 4] = s->regs[R_DDRIOB + 5] = s->regs[R_DDRIOB + 6]
+ = 0x00000e00;
+ s->regs[R_DDRIOB + 12] = 0x00000021;
}
static bool zynq_slcr_check_offset(hwaddr offset, bool rnw)
{
switch (offset) {
- case LOCK:
- case UNLOCK:
- case DDR_CAL_START:
- case DDR_REF_START:
+ case R_LOCK:
+ case R_UNLOCK:
+ case R_DDR_CAL_START:
+ case R_DDR_REF_START:
return !rnw; /* Write only */
- case LOCKSTA:
- case FPGA0_THR_STA:
- case FPGA1_THR_STA:
- case FPGA2_THR_STA:
- case FPGA3_THR_STA:
- case BOOT_MODE:
- case PSS_IDCODE:
- case DDR_CMD_STA:
- case DDR_DFI_STATUS:
- case PLL_STATUS:
+ case R_LOCKSTA:
+ case R_FPGA0_THR_STA:
+ case R_FPGA1_THR_STA:
+ case R_FPGA2_THR_STA:
+ case R_FPGA3_THR_STA:
+ case R_BOOT_MODE:
+ case R_PSS_IDCODE:
+ case R_DDR_CMD_STA:
+ case R_DDR_DFI_STATUS:
+ case R_PLL_STATUS:
return rnw;/* read only */
- case SCL:
- case ARM_PLL_CTRL ... IO_PLL_CTRL:
- case ARM_PLL_CFG ... IO_PLL_CFG:
- case ARM_CLK_CTRL ... TOPSW_CLK_CTRL:
- case FPGA0_CLK_CTRL ... FPGA0_THR_CNT:
- case FPGA1_CLK_CTRL ... FPGA1_THR_CNT:
- case FPGA2_CLK_CTRL ... FPGA2_THR_CNT:
- case FPGA3_CLK_CTRL ... FPGA3_THR_CNT:
- case BANDGAP_TRIP:
- case PLL_PREDIVISOR:
- case CLK_621_TRUE:
- case PSS_RST_CTRL ... A9_CPU_RST_CTRL:
- case RS_AWDT_CTRL:
- case RST_REASON:
- case REBOOT_STATUS:
- case APU_CTRL:
- case WDT_CLK_SEL:
- case TZ_DMA_NS ... TZ_DMA_PERIPH_NS:
- case DDR_URGENT:
- case DDR_URGENT_SEL:
- case MIO ... MIO + MIO_LENGTH - 1:
- case MIO_LOOPBACK ... MIO_MST_TRI1:
- case SD0_WP_CD_SEL:
- case SD1_WP_CD_SEL:
- case LVL_SHFTR_EN:
- case OCM_CFG:
- case CPU_RAM:
- case IOU:
- case DMAC_RAM:
- case AFI0 ... AFI3 + AFI_LENGTH - 1:
- case OCM:
- case DEVCI_RAM:
- case CSG_RAM:
- case GPIOB_CTRL ... GPIOB_CFG_CMOS33:
- case GPIOB_CFG_HSTL:
- case GPIOB_DRVR_BIAS_CTRL:
- case DDRIOB ... DDRIOB + DDRIOB_LENGTH - 1:
+ case R_SCL:
+ case R_ARM_PLL_CTRL ... R_IO_PLL_CTRL:
+ case R_ARM_PLL_CFG ... R_IO_PLL_CFG:
+ case R_ARM_CLK_CTRL ... R_TOPSW_CLK_CTRL:
+ case R_FPGA0_CLK_CTRL ... R_FPGA0_THR_CNT:
+ case R_FPGA1_CLK_CTRL ... R_FPGA1_THR_CNT:
+ case R_FPGA2_CLK_CTRL ... R_FPGA2_THR_CNT:
+ case R_FPGA3_CLK_CTRL ... R_FPGA3_THR_CNT:
+ case R_BANDGAP_TRIP:
+ case R_PLL_PREDIVISOR:
+ case R_CLK_621_TRUE:
+ case R_PSS_RST_CTRL ... R_A9_CPU_RST_CTRL:
+ case R_RS_AWDT_CTRL:
+ case R_RST_REASON:
+ case R_REBOOT_STATUS:
+ case R_APU_CTRL:
+ case R_WDT_CLK_SEL:
+ case R_TZ_DMA_NS ... R_TZ_DMA_PERIPH_NS:
+ case R_DDR_URGENT:
+ case R_DDR_URGENT_SEL:
+ case R_MIO ... R_MIO + MIO_LENGTH - 1:
+ case R_MIO_LOOPBACK ... R_MIO_MST_TRI1:
+ case R_SD0_WP_CD_SEL:
+ case R_SD1_WP_CD_SEL:
+ case R_LVL_SHFTR_EN:
+ case R_OCM_CFG:
+ case R_CPU_RAM:
+ case R_IOU:
+ case R_DMAC_RAM:
+ case R_AFI0 ... R_AFI3 + AFI_LENGTH - 1:
+ case R_OCM:
+ case R_DEVCI_RAM:
+ case R_CSG_RAM:
+ case R_GPIOB_CTRL ... R_GPIOB_CFG_CMOS33:
+ case R_GPIOB_CFG_HSTL:
+ case R_GPIOB_DRVR_BIAS_CTRL:
+ case R_DDRIOB ... R_DDRIOB + DDRIOB_LENGTH - 1:
return true;
default:
return false;
@@ -371,24 +371,24 @@ static void zynq_slcr_write(void *opaque, hwaddr offset,
}
switch (offset) {
- case SCL:
- s->regs[SCL] = val & 0x1;
+ case R_SCL:
+ s->regs[R_SCL] = val & 0x1;
return;
- case LOCK:
+ case R_LOCK:
if ((val & 0xFFFF) == XILINX_LOCK_KEY) {
DB_PRINT("XILINX LOCK 0xF8000000 + 0x%x <= 0x%x\n", (int)offset,
(unsigned)val & 0xFFFF);
- s->regs[LOCKSTA] = 1;
+ s->regs[R_LOCKSTA] = 1;
} else {
DB_PRINT("WRONG XILINX LOCK KEY 0xF8000000 + 0x%x <= 0x%x\n",
(int)offset, (unsigned)val & 0xFFFF);
}
return;
- case UNLOCK:
+ case R_UNLOCK:
if ((val & 0xFFFF) == XILINX_UNLOCK_KEY) {
DB_PRINT("XILINX UNLOCK 0xF8000000 + 0x%x <= 0x%x\n", (int)offset,
(unsigned)val & 0xFFFF);
- s->regs[LOCKSTA] = 0;
+ s->regs[R_LOCKSTA] = 0;
} else {
DB_PRINT("WRONG XILINX UNLOCK KEY 0xF8000000 + 0x%x <= 0x%x\n",
(int)offset, (unsigned)val & 0xFFFF);
@@ -396,7 +396,7 @@ static void zynq_slcr_write(void *opaque, hwaddr offset,
return;
}
- if (s->regs[LOCKSTA]) {
+ if (s->regs[R_LOCKSTA]) {
qemu_log_mask(LOG_GUEST_ERROR,
"SCLR registers are locked. Unlock them first\n");
return;
@@ -404,8 +404,8 @@ static void zynq_slcr_write(void *opaque, hwaddr offset,
s->regs[offset] = val;
switch (offset) {
- case PSS_RST_CTRL:
- if (val & R_PSS_RST_CTRL_SOFT_RST) {
+ case R_PSS_RST_CTRL:
+ if (FIELD_EX32(val, PSS_RST_CTRL, SOFT_RST)) {
qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET);
}
break;
--
2.20.1
- [Qemu-devel] [PULL 00/29] target-arm queue, Peter Maydell, 2019/08/16
- [Qemu-devel] [PULL 03/29] Set ENET_BD_BDU in I.MX FEC controller, Peter Maydell, 2019/08/16
- [Qemu-devel] [PULL 01/29] target/arm: generate a custom MIDR for -cpu max, Peter Maydell, 2019/08/16
- [Qemu-devel] [PULL 04/29] target/arm: Factor out 'generate singlestep exception' function, Peter Maydell, 2019/08/16
- [Qemu-devel] [PULL 06/29] target/arm: Pass in pc to thumb_insn_is_16bit, Peter Maydell, 2019/08/16
- [Qemu-devel] [PULL 07/29] target/arm: Introduce pc_curr, Peter Maydell, 2019/08/16
- [Qemu-devel] [PULL 02/29] hw/misc/zynq_slcr: use standard register definition,
Peter Maydell <=
- [Qemu-devel] [PULL 09/29] target/arm: Introduce add_reg_for_lit, Peter Maydell, 2019/08/16
- [Qemu-devel] [PULL 08/29] target/arm: Introduce read_pc, Peter Maydell, 2019/08/16
- [Qemu-devel] [PULL 16/29] target/arm: Remove helper_double_saturate, Peter Maydell, 2019/08/16
- [Qemu-devel] [PULL 14/29] target/arm: Remove offset argument to gen_exception_bkpt_insn, Peter Maydell, 2019/08/16
- [Qemu-devel] [PULL 13/29] target/arm: Replace offset with pc in gen_exception_internal_insn, Peter Maydell, 2019/08/16
- [Qemu-devel] [PULL 19/29] target/arm/helper: zcr: Add build bug next to value range assumption, Peter Maydell, 2019/08/16
- [Qemu-devel] [PULL 17/29] target/arm/cpu64: Ensure kvm really supports aarch64=off, Peter Maydell, 2019/08/16
- [Qemu-devel] [PULL 05/29] target/arm: Fix routing of singlestep exceptions, Peter Maydell, 2019/08/16
- [Qemu-devel] [PULL 10/29] target/arm: Remove redundant s->pc & ~1, Peter Maydell, 2019/08/16
- [Qemu-devel] [PULL 11/29] target/arm: Replace s->pc with s->base.pc_next, Peter Maydell, 2019/08/16