[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH v5 3/3] hw/gpio: Add in AST2600 specific implementat
|
From: |
Rashmica Gupta |
|
Subject: |
[Qemu-devel] [PATCH v5 3/3] hw/gpio: Add in AST2600 specific implementation |
|
Date: |
Fri, 16 Aug 2019 17:32:29 +1000 |
The AST2600 has the same sets of 3.6v gpios as the AST2400 plus an
addtional two sets of 1.8V gpios.
Signed-off-by: Rashmica Gupta <address@hidden>
---
hw/gpio/aspeed_gpio.c | 142 ++++++++++++++++++++++++++++++++++++++++--
1 file changed, 137 insertions(+), 5 deletions(-)
diff --git a/hw/gpio/aspeed_gpio.c b/hw/gpio/aspeed_gpio.c
index d6a4c0c757..a3306a8f32 100644
--- a/hw/gpio/aspeed_gpio.c
+++ b/hw/gpio/aspeed_gpio.c
@@ -167,6 +167,48 @@
#define GPIO_3_6V_MEM_SIZE 0x1F0
#define GPIO_3_6V_REG_ARRAY_SIZE (GPIO_3_6V_MEM_SIZE >> 2)
+/* AST2600 only - 1.8V gpios */
+/*
+ * The AST2600 has same 3.6V gpios as the AST2400 (memory offsets 0x0-0x198)
+ * and addtional 1.8V gpios (memory offsets 0x800-0x9D4).
+ */
+#define GPIO_1_8V_REG_OFFSET 0x800
+#define GPIO_1_8V_ABCD_DATA_VALUE ((0x800 - GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_1_8V_ABCD_DIRECTION ((0x804 - GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_1_8V_ABCD_INT_ENABLE ((0x808 - GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_1_8V_ABCD_INT_SENS_0 ((0x80C - GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_1_8V_ABCD_INT_SENS_1 ((0x810 - GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_1_8V_ABCD_INT_SENS_2 ((0x814 - GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_1_8V_ABCD_INT_STATUS ((0x818 - GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_1_8V_ABCD_RESET_TOLERANT ((0x81C - GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_1_8V_E_DATA_VALUE ((0x820 - GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_1_8V_E_DIRECTION ((0x824 - GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_1_8V_E_INT_ENABLE ((0x828 - GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_1_8V_E_INT_SENS_0 ((0x82C - GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_1_8V_E_INT_SENS_1 ((0x830 - GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_1_8V_E_INT_SENS_2 ((0x834 - GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_1_8V_E_INT_STATUS ((0x838 - GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_1_8V_E_RESET_TOLERANT ((0x83C - GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_1_8V_ABCD_DEBOUNCE_1 ((0x840 - GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_1_8V_ABCD_DEBOUNCE_2 ((0x844 - GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_1_8V_E_DEBOUNCE_1 ((0x848 - GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_1_8V_E_DEBOUNCE_2 ((0x84C - GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_1_8V_DEBOUNCE_TIME_1 ((0x850 - GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_1_8V_DEBOUNCE_TIME_2 ((0x854 - GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_1_8V_DEBOUNCE_TIME_3 ((0x858 - GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_1_8V_ABCD_COMMAND_SRC_0 ((0x860 - GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_1_8V_ABCD_COMMAND_SRC_1 ((0x864 - GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_1_8V_E_COMMAND_SRC_0 ((0x868 - GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_1_8V_E_COMMAND_SRC_1 ((0x86C - GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_1_8V_ABCD_DATA_READ ((0x8C0 - GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_1_8V_E_DATA_READ ((0x8C4 - GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_1_8V_ABCD_INPUT_MASK ((0x9D0 - GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_1_8V_E_INPUT_MASK ((0x9D4 - GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_1_8V_MEM_SIZE 0x9D8
+#define GPIO_1_8V_REG_ARRAY_SIZE ((GPIO_1_8V_MEM_SIZE - \
+ GPIO_1_8V_REG_OFFSET) >> 2)
+#define GPIO_MAX_MEM_SIZE MAX(GPIO_3_6V_MEM_SIZE, GPIO_1_8V_MEM_SIZE)
+
static int aspeed_evaluate_irq(GPIOSets *regs, int gpio_prev_high, int gpio)
{
uint32_t falling_edge = 0, rising_edge = 0;
@@ -461,6 +503,39 @@ static const AspeedGPIOReg
aspeed_3_6v_gpios[GPIO_3_6V_REG_ARRAY_SIZE] = {
[GPIO_AC_INPUT_MASK] = { 7, gpio_reg_input_mask },
};
+static const AspeedGPIOReg aspeed_1_8v_gpios[GPIO_1_8V_REG_ARRAY_SIZE] = {
+ /* 1.8V Set ABCD */
+ [GPIO_1_8V_ABCD_DATA_VALUE] = {0, gpio_reg_data_value},
+ [GPIO_1_8V_ABCD_DIRECTION] = {0, gpio_reg_direction},
+ [GPIO_1_8V_ABCD_INT_ENABLE] = {0, gpio_reg_int_enable},
+ [GPIO_1_8V_ABCD_INT_SENS_0] = {0, gpio_reg_int_sens_0},
+ [GPIO_1_8V_ABCD_INT_SENS_1] = {0, gpio_reg_int_sens_1},
+ [GPIO_1_8V_ABCD_INT_SENS_2] = {0, gpio_reg_int_sens_2},
+ [GPIO_1_8V_ABCD_INT_STATUS] = {0, gpio_reg_int_status},
+ [GPIO_1_8V_ABCD_RESET_TOLERANT] = {0, gpio_reg_reset_tolerant},
+ [GPIO_1_8V_ABCD_DEBOUNCE_1] = {0, gpio_reg_debounce_1},
+ [GPIO_1_8V_ABCD_DEBOUNCE_2] = {0, gpio_reg_debounce_2},
+ [GPIO_1_8V_ABCD_COMMAND_SRC_0] = {0, gpio_reg_cmd_source_0},
+ [GPIO_1_8V_ABCD_COMMAND_SRC_1] = {0, gpio_reg_cmd_source_1},
+ [GPIO_1_8V_ABCD_DATA_READ] = {0, gpio_reg_data_read},
+ [GPIO_1_8V_ABCD_INPUT_MASK] = {0, gpio_reg_input_mask},
+ /* 1.8V Set E */
+ [GPIO_1_8V_E_DATA_VALUE] = {1, gpio_reg_data_value},
+ [GPIO_1_8V_E_DIRECTION] = {1, gpio_reg_direction},
+ [GPIO_1_8V_E_INT_ENABLE] = {1, gpio_reg_int_enable},
+ [GPIO_1_8V_E_INT_SENS_0] = {1, gpio_reg_int_sens_0},
+ [GPIO_1_8V_E_INT_SENS_1] = {1, gpio_reg_int_sens_1},
+ [GPIO_1_8V_E_INT_SENS_2] = {1, gpio_reg_int_sens_2},
+ [GPIO_1_8V_E_INT_STATUS] = {1, gpio_reg_int_status},
+ [GPIO_1_8V_E_RESET_TOLERANT] = {1, gpio_reg_reset_tolerant},
+ [GPIO_1_8V_E_DEBOUNCE_1] = {1, gpio_reg_debounce_1},
+ [GPIO_1_8V_E_DEBOUNCE_2] = {1, gpio_reg_debounce_2},
+ [GPIO_1_8V_E_COMMAND_SRC_0] = {1, gpio_reg_cmd_source_0},
+ [GPIO_1_8V_E_COMMAND_SRC_1] = {1, gpio_reg_cmd_source_1},
+ [GPIO_1_8V_E_DATA_READ] = {1, gpio_reg_data_read},
+ [GPIO_1_8V_E_INPUT_MASK] = {1, gpio_reg_input_mask},
+};
+
static uint64_t aspeed_gpio_read(void *opaque, hwaddr offset, uint32_t size)
{
AspeedGPIOState *s = ASPEED_GPIO(opaque);
@@ -659,8 +734,11 @@ static void aspeed_gpio_get_pin(Object *obj, Visitor *v,
const char *name,
int set_idx, group_idx = 0;
if (sscanf(name, "gpio%2[A-Z]%1d", group, &pin) != 2) {
- error_setg(errp, "%s: error reading %s", __func__, name);
- return;
+ /* 1.8V gpio */
+ if (sscanf(name, "gpio%3s%1d", group, &pin) != 2) {
+ error_setg(errp, "%s: error reading %s", __func__, name);
+ return;
+ }
}
set_idx = get_set_idx(s, group, &group_idx);
if (set_idx == -1) {
@@ -683,8 +761,11 @@ static void aspeed_gpio_set_pin(Object *obj, Visitor *v,
const char *name,
visit_type_bool(v, name, &level, &local_err);
if (sscanf(name, "gpio%2[A-Z]%1d", group, &pin) != 2) {
- error_setg(errp, "%s: error reading %s", __func__, name);
- return;
+ /* 1.8V gpio */
+ if (sscanf(name, "gpio%3s%1d", group, &pin) != 2) {
+ error_setg(errp, "%s: error reading %s", __func__, name);
+ return;
+ }
}
set_idx = get_set_idx(s, group, &group_idx);
if (set_idx == -1) {
@@ -716,6 +797,21 @@ static const GPIOSetProperties ast2500_set_props[] = {
[7] = {0x000000ff, 0x000000ff, {"AC"} },
};
+static GPIOSetProperties ast2600_3_6v_set_props[] = {
+ [0] = {0xffffffff, 0xffffffff, {"A", "B", "C", "D"} },
+ [1] = {0xffffffff, 0xffffffff, {"E", "F", "G", "H"} },
+ [2] = {0xffffffff, 0xffffffff, {"I", "J", "K", "L"} },
+ [3] = {0xffffffff, 0xffffffff, {"M", "N", "O", "P"} },
+ [4] = {0xffffffff, 0xffffffff, {"Q", "R", "S", "T"} },
+ [5] = {0xffffffff, 0x0000ffff, {"U", "V", "W", "X"} },
+ [6] = {0xffff0000, 0x0fff0000, {"Y", "Z", "", ""} },
+};
+
+static GPIOSetProperties ast2600_1_8v_set_props[] = {
+ [0] = {0xffffffff, 0xffffffff, {"18A", "18B", "18C", "18D"} },
+ [1] = {0x0000000f, 0x0000000f, {"18E"} },
+};
+
static const MemoryRegionOps aspeed_gpio_ops = {
.read = aspeed_gpio_read,
.write = aspeed_gpio_write,
@@ -748,7 +844,7 @@ static void aspeed_gpio_realize(DeviceState *dev, Error
**errp)
}
memory_region_init_io(&s->iomem, OBJECT(s), &aspeed_gpio_ops, s,
- TYPE_ASPEED_GPIO, GPIO_3_6V_MEM_SIZE);
+ TYPE_ASPEED_GPIO, GPIO_MAX_MEM_SIZE);
sysbus_init_mmio(sbd, &s->iomem);
}
@@ -841,6 +937,26 @@ static void aspeed_gpio_2500_class_init(ObjectClass
*klass, void *data)
agc->reg_table = aspeed_3_6v_gpios;
}
+static void aspeed_gpio_ast2600_3_6v_class_init(ObjectClass *klass, void *data)
+{
+ AspeedGPIOClass *agc = ASPEED_GPIO_CLASS(klass);
+
+ agc->props = ast2600_3_6v_set_props;
+ agc->nr_gpio_pins = 208;
+ agc->nr_gpio_sets = 7;
+ agc->reg_table = aspeed_3_6v_gpios;
+}
+
+static void aspeed_gpio_ast2600_1_8v_class_init(ObjectClass *klass, void *data)
+{
+ AspeedGPIOClass *agc = ASPEED_GPIO_CLASS(klass);
+
+ agc->props = ast2600_1_8v_set_props;
+ agc->nr_gpio_pins = 36;
+ agc->nr_gpio_sets = 2;
+ agc->reg_table = aspeed_1_8v_gpios;
+}
+
static const TypeInfo aspeed_gpio_info = {
.name = TYPE_ASPEED_GPIO,
.parent = TYPE_SYS_BUS_DEVICE,
@@ -864,11 +980,27 @@ static const TypeInfo aspeed_gpio_ast2500_info = {
.instance_init = aspeed_gpio_init,
};
+static const TypeInfo aspeed_gpio_ast2600_3_6v_info = {
+ .name = TYPE_ASPEED_GPIO "0-ast2600",
+ .parent = TYPE_ASPEED_GPIO,
+ .class_init = aspeed_gpio_ast2600_3_6v_class_init,
+ .instance_init = aspeed_gpio_init,
+};
+
+static const TypeInfo aspeed_gpio_ast2600_1_8v_info = {
+ .name = TYPE_ASPEED_GPIO "1-ast2600",
+ .parent = TYPE_ASPEED_GPIO,
+ .class_init = aspeed_gpio_ast2600_1_8v_class_init,
+ .instance_init = aspeed_gpio_init,
+};
+
static void aspeed_gpio_register_types(void)
{
type_register_static(&aspeed_gpio_info);
type_register_static(&aspeed_gpio_ast2400_info);
type_register_static(&aspeed_gpio_ast2500_info);
+ type_register_static(&aspeed_gpio_ast2600_3_6v_info);
+ type_register_static(&aspeed_gpio_ast2600_1_8v_info);
}
type_init(aspeed_gpio_register_types);
--
2.20.1
- [Qemu-devel] [PATCH v4 1/3] hw/gpio: Add basic Aspeed GPIO model for AST2400 and AST2500, (continued)
- [Qemu-devel] [PATCH v4 1/3] hw/gpio: Add basic Aspeed GPIO model for AST2400 and AST2500, Rashmica Gupta, 2019/08/14
- Re: [Qemu-devel] [PATCH v4 0/3] Add Aspeed GPIO controller model, no-reply, 2019/08/14
- [Qemu-devel] [PATCH v4 0/3] Add Aspeed GPIO controller model, Rashmica Gupta, 2019/08/16
- [Qemu-devel] [PATCH v5 1/3] hw/gpio: Add basic Aspeed GPIO model for AST2400 and AST2500, Rashmica Gupta, 2019/08/16
- [Qemu-devel] [PATCH v5 3/3] hw/gpio: Add in AST2600 specific implementation,
Rashmica Gupta <=
- Re: [Qemu-devel] [PATCH v4 0/3] Add Aspeed GPIO controller model, Cédric Le Goater, 2019/08/16