qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH v3 13/28] riscv: sifive_e: prci: Update the PRCI reg


From: Bin Meng
Subject: [Qemu-devel] [PATCH v3 13/28] riscv: sifive_e: prci: Update the PRCI register block size
Date: Sun, 11 Aug 2019 01:06:46 -0700

Currently the PRCI register block size is set to 0x8000, but in fact
0x1000 is enough, which is also what the manual says.

Signed-off-by: Bin Meng <address@hidden>
Reviewed-by: Chih-Min Chao <address@hidden>
---

Changes in v3: None
Changes in v2: None

 hw/riscv/sifive_e_prci.c         | 2 +-
 include/hw/riscv/sifive_e_prci.h | 2 ++
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/hw/riscv/sifive_e_prci.c b/hw/riscv/sifive_e_prci.c
index c906f11..4cbce48 100644
--- a/hw/riscv/sifive_e_prci.c
+++ b/hw/riscv/sifive_e_prci.c
@@ -85,7 +85,7 @@ static void sifive_prci_init(Object *obj)
     SiFivePRCIState *s = SIFIVE_E_PRCI(obj);
 
     memory_region_init_io(&s->mmio, obj, &sifive_prci_ops, s,
-                          TYPE_SIFIVE_E_PRCI, 0x8000);
+                          TYPE_SIFIVE_E_PRCI, SIFIVE_E_PRCI_REG_SIZE);
     sysbus_init_mmio(SYS_BUS_DEVICE(obj), &s->mmio);
 
     s->hfrosccfg = (SIFIVE_PRCI_HFROSCCFG_RDY | SIFIVE_PRCI_HFROSCCFG_EN);
diff --git a/include/hw/riscv/sifive_e_prci.h b/include/hw/riscv/sifive_e_prci.h
index 7932fe7..81e506b 100644
--- a/include/hw/riscv/sifive_e_prci.h
+++ b/include/hw/riscv/sifive_e_prci.h
@@ -47,6 +47,8 @@ enum {
     SIFIVE_PRCI_PLLOUTDIV_DIV1  = (1 << 8)
 };
 
+#define SIFIVE_E_PRCI_REG_SIZE  0x1000
+
 #define TYPE_SIFIVE_E_PRCI      "riscv.sifive.e.prci"
 
 #define SIFIVE_E_PRCI(obj) \
-- 
2.7.4




reply via email to

[Prev in Thread] Current Thread [Next in Thread]