qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [Bug 1838475] Re: qemu-system-arm exits when cortex-m4 floa


From: Peter Maydell
Subject: [Qemu-devel] [Bug 1838475] Re: qemu-system-arm exits when cortex-m4 floating point used and irq occurs
Date: Fri, 02 Aug 2019 16:38:53 -0000

Now fixed in git master; will be in the imminent 4.1 release.


** Changed in: qemu
       Status: In Progress => Fix Committed

-- 
You received this bug notification because you are a member of qemu-
devel-ml, which is subscribed to QEMU.
https://bugs.launchpad.net/bugs/1838475

Title:
  qemu-system-arm exits when cortex-m4 floating point used and irq
  occurs

Status in QEMU:
  Fix Committed

Bug description:
  qemu-system-arm exits with

  "...Secure UsageFault with CFSR.NOCP because NSACR.CP10 prevents stacking FP 
regs
  ...taking pending nonsecure exception 3
  Taking exception 7 [Breakpoint]
  qemu: fatal: Lockup: can't escalate 3 to HardFault (current priority -1)" 

  when emulating Cortex-m4, executing at least 1 floating point
  instruction, and then an irq (e.g. sys tick) occurring.

  CPACR.CP10 and CPACR.CP11 are set to 0x3 respectively prior to
  executing the fp instructions.

  NOTE: NSACR does not appear to be a cortex m4 register.

  Attached is a simplified elf to repro the issue.

  The qemu command line is: "qemu-system-arm --gdb tcp::1234 -cpu
  cortex-m4 -machine lm3s6965evb -nographic -semihosting-config
  enable=on,target=native -kernel QemuExitWhenUsingFPAndIRQOccurs.elf -d
  int"

To manage notifications about this bug go to:
https://bugs.launchpad.net/qemu/+bug/1838475/+subscriptions



reply via email to

[Prev in Thread] Current Thread [Next in Thread]