[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH v2 5/8] hw/core: Add a config switch for the "or-irq
From: |
Thomas Huth |
Subject: |
[Qemu-devel] [PATCH v2 5/8] hw/core: Add a config switch for the "or-irq" device |
Date: |
Wed, 31 Jul 2019 09:56:49 +0200 |
The "or-irq" device is only used by certain machines. Let's add
a proper config switch for it so that it only gets compiled when we
really need it.
Signed-off-by: Thomas Huth <address@hidden>
---
hw/arm/Kconfig | 3 +++
hw/core/Kconfig | 3 +++
hw/core/Makefile.objs | 2 +-
hw/pci-host/Kconfig | 3 ++-
4 files changed, 9 insertions(+), 2 deletions(-)
diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
index ab65ecd216..849195c3f6 100644
--- a/hw/arm/Kconfig
+++ b/hw/arm/Kconfig
@@ -292,6 +292,7 @@ config RASPI
config STM32F205_SOC
bool
select ARM_V7M
+ select OR_IRQ
select STM32F2XX_TIMER
select STM32F2XX_USART
select STM32F2XX_SYSCFG
@@ -360,6 +361,7 @@ config MPS2
select LAN9118
select MPS2_FPGAIO
select MPS2_SCC
+ select OR_IRQ
select PL022 # Serial port
select PL080 # DMA controller
@@ -439,6 +441,7 @@ config ARMSSE
select IOTKIT_SECCTL
select IOTKIT_SYSCTL
select IOTKIT_SYSINFO
+ select OR_IRQ
select TZ_MPC
select TZ_MSC
select TZ_PPC
diff --git a/hw/core/Kconfig b/hw/core/Kconfig
index d11920fcb3..984143456a 100644
--- a/hw/core/Kconfig
+++ b/hw/core/Kconfig
@@ -7,6 +7,9 @@ config PTIMER
config FITLOADER
bool
+config OR_IRQ
+ bool
+
config PLATFORM_BUS
bool
diff --git a/hw/core/Makefile.objs b/hw/core/Makefile.objs
index d6cfb2a81b..ce337bd7c9 100644
--- a/hw/core/Makefile.objs
+++ b/hw/core/Makefile.objs
@@ -18,7 +18,7 @@ common-obj-$(CONFIG_SOFTMMU) += loader.o
common-obj-$(CONFIG_FITLOADER) += loader-fit.o
common-obj-$(CONFIG_SOFTMMU) += qdev-properties-system.o
common-obj-$(CONFIG_REGISTER) += register.o
-common-obj-$(CONFIG_SOFTMMU) += or-irq.o
+common-obj-$(CONFIG_OR_IRQ) += or-irq.o
common-obj-$(CONFIG_SOFTMMU) += split-irq.o
common-obj-$(CONFIG_PLATFORM_BUS) += platform-bus.o
common-obj-$(CONFIG_SOFTMMU) += generic-loader.o
diff --git a/hw/pci-host/Kconfig b/hw/pci-host/Kconfig
index 8c16d96b3f..1edc1a31d4 100644
--- a/hw/pci-host/Kconfig
+++ b/hw/pci-host/Kconfig
@@ -2,8 +2,9 @@ config PAM
bool
config PREP_PCI
- select PCI
bool
+ select PCI
+ select OR_IRQ
config GRACKLE_PCI
select PCI
--
2.21.0
- [Qemu-devel] [PATCH for-4.2 v2 0/8] Kconfig switches, Thomas Huth, 2019/07/31
- [Qemu-devel] [PATCH v2 1/8] hw/Kconfig: Move the generic XLNX_ZYNQMP to the root hw/Kconfig, Thomas Huth, 2019/07/31
- [Qemu-devel] [PATCH v2 2/8] hw/intc: Only build the xlnx-iomod-intc device for the MicroBlaze PMU, Thomas Huth, 2019/07/31
- [Qemu-devel] [PATCH v2 3/8] hw/dma: Do not build the xlnx_dpdma device for the MicroBlaze machines, Thomas Huth, 2019/07/31
- [Qemu-devel] [PATCH v2 4/8] hw/core: Add a config switch for the "register" device, Thomas Huth, 2019/07/31
- [Qemu-devel] [PATCH v2 5/8] hw/core: Add a config switch for the "or-irq" device,
Thomas Huth <=
- [Qemu-devel] [PATCH v2 6/8] hw/core: Add a config switch for the "split-irq" device, Thomas Huth, 2019/07/31
- [Qemu-devel] [PATCH v2 7/8] hw/misc: Add a config switch for the "unimplemented" device, Thomas Huth, 2019/07/31
[Qemu-devel] [PATCH v2 8/8] hw/core: Add a config switch for the generic loader device, Thomas Huth, 2019/07/31