[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH 2/2] iotests: use python logging for iotests.log
From: |
Eduardo Habkost |
Subject: |
Re: [Qemu-devel] [PATCH 2/2] iotests: use python logging for iotests.log() |
Date: |
Sun, 28 Jul 2019 20:36:48 -0300 |
On Fri, Jul 26, 2019 at 06:52:01PM -0400, John Snow wrote:
> We can turn logging on/off globally instead of per-function.
>
> Remove use_log from run_job, and use python logging to turn on
> diffable output when we run through a script entry point.
>
> (No, I have no idea why output on 245 changed. I really don't.)
I believe this happens because the logging StreamHandler will
flush the stream at every call.
I see the same output reordering on 245 if I add a
sys.stdout.flush() call to iotests.log(), or if I change
iotests.main() to use sys.stdout for the unittest runner output.
>
> Signed-off-by: John Snow <address@hidden>
> ---
> tests/qemu-iotests/030 | 4 +--
> tests/qemu-iotests/245 | 1 +
> tests/qemu-iotests/245.out | 24 +++++++++---------
> tests/qemu-iotests/iotests.py | 48 ++++++++++++++++++++---------------
> 4 files changed, 43 insertions(+), 34 deletions(-)
>
> diff --git a/tests/qemu-iotests/030 b/tests/qemu-iotests/030
> index 1b69f318c6..a382cb430b 100755
> --- a/tests/qemu-iotests/030
> +++ b/tests/qemu-iotests/030
> @@ -411,8 +411,8 @@ class TestParallelOps(iotests.QMPTestCase):
> result = self.vm.qmp('block-job-set-speed', device='drive0', speed=0)
> self.assert_qmp(result, 'return', {})
>
> - self.vm.run_job(job='drive0', auto_dismiss=True, use_log=False)
> - self.vm.run_job(job='node4', auto_dismiss=True, use_log=False)
> + self.vm.run_job(job='drive0', auto_dismiss=True)
> + self.vm.run_job(job='node4', auto_dismiss=True)
So, this one is the only run_job() caller specifying
use_log=False. It doesn't call activate_logging() anywhere, so
it seems OK.
However, we need to ensure all the other run_job() callers will
actually enable logging. The remaining run_job() callers are:
206 207 210 211 212 213 237 245 255 256.
These look OK:
206:iotests.script_initialize(supported_fmts=['qcow2'])
245: iotests.activate_logging()
255:iotests.script_initialize(supported_fmts=['qcow2'])
256:iotests.script_initialize(supported_fmts=['qcow2'])
257: iotests.script_main(main, supported_fmts=['qcow2'])
These don't seem to call activate_logging() anywhere:
207 210 211 212 213 237.
What about other scripts calling log() that aren't calling activate_logging()?
Let's see:
$ git grep -LE 'script_main|script_initialize|activate_logging' \
$(grep -lP '(?<!get_)log\(' [0-9]*)
207
210
211
212
213
237
$
I didn't run all of these test cases, but I can see that 210 is
now failing:
$ ./check -luks 210
QEMU --
"/home/ehabkost/rh/proj/virt/qemu/tests/qemu-iotests/../../x86_64-softmmu/qemu-system-x86_64"
-nodefaults -machine accel=qtest
QEMU_IMG --
"/home/ehabkost/rh/proj/virt/qemu/tests/qemu-iotests/../../qemu-img"
QEMU_IO --
"/home/ehabkost/rh/proj/virt/qemu/tests/qemu-iotests/../../qemu-io" --cache
writeback
QEMU_NBD --
"/home/ehabkost/rh/proj/virt/qemu/tests/qemu-iotests/../../qemu-nbd"
IMGFMT -- luks (iter-time=10)
IMGPROTO -- file
TEST_DIR -- /home/ehabkost/rh/proj/virt/qemu/tests/qemu-iotests/scratch
SOCKET_SCM_HELPER --
/home/ehabkost/rh/proj/virt/qemu/tests/qemu-iotests/socket_scm_helper
210 fail [20:20:37] [20:21:00] (last: 22s) output mismatch
(see 210.out.bad)
--- /home/ehabkost/rh/proj/virt/qemu/tests/qemu-iotests/210.out 2019-07-28
18:38:18.040555415 -0300
+++ /home/ehabkost/rh/proj/virt/qemu/tests/qemu-iotests/210.out.bad
2019-07-28 20:20:37.398971280 -0300
@@ -1,231 +0,0 @@
-=== Successful image creation (defaults) ===
-
-{"execute": "blockdev-create", "arguments": {"job-id": "job0", "options":
{"driver": "file", "filename": "TEST_DIR/PID-t.luks", "size": 0}}}
[...]
As most test cases require logging to be enabled, my suggestion
is to activate logging by default and provide a
disable_test_logging() function that can be used by 030.
> self.assert_no_active_block_jobs()
>
> # Test a block-stream and a block-commit job in parallel
> diff --git a/tests/qemu-iotests/245 b/tests/qemu-iotests/245
> index bc1ceb9792..3bc29acb33 100644
> --- a/tests/qemu-iotests/245
> +++ b/tests/qemu-iotests/245
> @@ -1000,4 +1000,5 @@ class TestBlockdevReopen(iotests.QMPTestCase):
> self.reopen(opts, {'backing': 'hd2'})
>
> if __name__ == '__main__':
> + iotests.activate_logging()
> iotests.main(supported_fmts=["qcow2"])
> diff --git a/tests/qemu-iotests/245.out b/tests/qemu-iotests/245.out
> index a19de5214d..15c3630e92 100644
> --- a/tests/qemu-iotests/245.out
> +++ b/tests/qemu-iotests/245.out
> @@ -1,17 +1,17 @@
> +{"execute": "job-finalize", "arguments": {"id": "commit0"}}
> +{"return": {}}
> +{"data": {"id": "commit0", "type": "commit"}, "event": "BLOCK_JOB_PENDING",
> "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
> +{"data": {"device": "commit0", "len": 3145728, "offset": 3145728, "speed":
> 0, "type": "commit"}, "event": "BLOCK_JOB_COMPLETED", "timestamp":
> {"microseconds": "USECS", "seconds": "SECS"}}
> +{"execute": "job-finalize", "arguments": {"id": "stream0"}}
> +{"return": {}}
> +{"data": {"id": "stream0", "type": "stream"}, "event": "BLOCK_JOB_PENDING",
> "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
> +{"data": {"device": "stream0", "len": 3145728, "offset": 3145728, "speed":
> 0, "type": "stream"}, "event": "BLOCK_JOB_COMPLETED", "timestamp":
> {"microseconds": "USECS", "seconds": "SECS"}}
> +{"execute": "job-finalize", "arguments": {"id": "stream0"}}
> +{"return": {}}
> +{"data": {"id": "stream0", "type": "stream"}, "event": "BLOCK_JOB_PENDING",
> "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
> +{"data": {"device": "stream0", "len": 3145728, "offset": 3145728, "speed":
> 0, "type": "stream"}, "event": "BLOCK_JOB_COMPLETED", "timestamp":
> {"microseconds": "USECS", "seconds": "SECS"}}
> ..................
> ----------------------------------------------------------------------
> Ran 18 tests
>
> OK
> -{"execute": "job-finalize", "arguments": {"id": "commit0"}}
> -{"return": {}}
> -{"data": {"id": "commit0", "type": "commit"}, "event": "BLOCK_JOB_PENDING",
> "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
> -{"data": {"device": "commit0", "len": 3145728, "offset": 3145728, "speed":
> 0, "type": "commit"}, "event": "BLOCK_JOB_COMPLETED", "timestamp":
> {"microseconds": "USECS", "seconds": "SECS"}}
> -{"execute": "job-finalize", "arguments": {"id": "stream0"}}
> -{"return": {}}
> -{"data": {"id": "stream0", "type": "stream"}, "event": "BLOCK_JOB_PENDING",
> "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
> -{"data": {"device": "stream0", "len": 3145728, "offset": 3145728, "speed":
> 0, "type": "stream"}, "event": "BLOCK_JOB_COMPLETED", "timestamp":
> {"microseconds": "USECS", "seconds": "SECS"}}
> -{"execute": "job-finalize", "arguments": {"id": "stream0"}}
> -{"return": {}}
> -{"data": {"id": "stream0", "type": "stream"}, "event": "BLOCK_JOB_PENDING",
> "timestamp": {"microseconds": "USECS", "seconds": "SECS"}}
> -{"data": {"device": "stream0", "len": 3145728, "offset": 3145728, "speed":
> 0, "type": "stream"}, "event": "BLOCK_JOB_COMPLETED", "timestamp":
> {"microseconds": "USECS", "seconds": "SECS"}}
> diff --git a/tests/qemu-iotests/iotests.py b/tests/qemu-iotests/iotests.py
> index 5e9b2989dd..d55ca864eb 100644
> --- a/tests/qemu-iotests/iotests.py
> +++ b/tests/qemu-iotests/iotests.py
> @@ -35,6 +35,13 @@ from collections import OrderedDict
> sys.path.append(os.path.join(os.path.dirname(__file__), '..', '..',
> 'python'))
> from qemu import qtest
>
> +# Use this logger for logging messages directly from the iotests module
> +logger = logging.getLogger(__name__)
> +logger.addHandler(logging.NullHandler())
> +
> +# Use this logger for messages that ought to be used for diff output.
> +test_logger = logging.getLogger('.'.join((__name__, 'iotest')))
> +test_logger.addHandler(logging.NullHandler())
>
> # This will not work if arguments contain spaces but is necessary if we
> # want to support the override options that ./check supports.
> @@ -343,10 +350,10 @@ def log(msg, filters=[], indent=None):
> separators = (', ', ': ') if indent is None else (',', ': ')
> # Don't sort if it's already sorted
> do_sort = not isinstance(msg, OrderedDict)
> - print(json.dumps(msg, sort_keys=do_sort,
> - indent=indent, separators=separators))
> + test_logger.info(json.dumps(msg, sort_keys=do_sort,
> + indent=indent, separators=separators))
> else:
> - print(msg)
> + test_logger.info(msg)
>
> class Timeout:
> def __init__(self, seconds, errmsg = "Timeout"):
> @@ -559,7 +566,7 @@ class VM(qtest.QEMUQtestMachine):
>
> # Returns None on success, and an error string on failure
> def run_job(self, job, auto_finalize=True, auto_dismiss=False,
> - pre_finalize=None, cancel=False, use_log=True, wait=60.0):
> + pre_finalize=None, cancel=False, wait=60.0):
> """
> run_job moves a job from creation through to dismissal.
>
> @@ -572,7 +579,6 @@ class VM(qtest.QEMUQtestMachine):
> invoked prior to issuing job-finalize, if any.
> :param cancel: Bool. When true, cancels the job after the
> pre_finalize
> callback.
> - :param use_log: Bool. When false, does not log QMP messages.
> :param wait: Float. Timeout value specifying how long to wait for any
> event, in seconds. Defaults to 60.0.
> """
> @@ -590,8 +596,7 @@ class VM(qtest.QEMUQtestMachine):
> while True:
> ev = filter_qmp_event(self.events_wait(events))
> if ev['event'] != 'JOB_STATUS_CHANGE':
> - if use_log:
> - log(ev)
> + log(ev)
> continue
> status = ev['data']['status']
> if status == 'aborting':
> @@ -599,24 +604,15 @@ class VM(qtest.QEMUQtestMachine):
> for j in result['return']:
> if j['id'] == job:
> error = j['error']
> - if use_log:
> - log('Job failed: %s' % (j['error']))
> + log('Job failed: %s' % (j['error']))
> elif status == 'pending' and not auto_finalize:
> if pre_finalize:
> pre_finalize()
> - if cancel and use_log:
> + if cancel:
> self.qmp_log('job-cancel', id=job)
> - elif cancel:
> - self.qmp('job-cancel', id=job)
> - if use_log:
> - self.qmp_log('job-finalize', id=job)
> - else:
> - self.qmp('job-finalize', id=job)
> + self.qmp_log('job-finalize', id=job)
> elif status == 'concluded' and not auto_dismiss:
> - if use_log:
> - self.qmp_log('job-dismiss', id=job)
> - else:
> - self.qmp('job-dismiss', id=job)
> + self.qmp_log('job-dismiss', id=job)
> elif status == 'null':
> return error
>
> @@ -924,6 +920,7 @@ def execute_setup_common(supported_fmts=[],
> supported_oses=['linux'],
> output = io.BytesIO()
>
> logging.basicConfig(level=(logging.DEBUG if debug else logging.WARN))
> + logger.debug("iotests debugging messages active")
> return output, verbosity, debug
>
> def execute_test(test_function=None, *args, **kwargs):
> @@ -935,14 +932,25 @@ def execute_test(test_function=None, *args, **kwargs):
> else:
> test_function()
>
> +def activate_logging():
> + """Activate iotests.log() output to stdout for script-style tests."""
> + handler = logging.StreamHandler(stream=sys.stdout)
> + formatter = logging.Formatter('%(message)s')
> + handler.setFormatter(formatter)
> + test_logger.addHandler(handler)
> + test_logger.setLevel(logging.INFO)
> + test_logger.propagate = False
> +
> # This is called from script-style iotests without a single point of entry
> def script_initialize(*args, **kwargs):
> """Initialize script-style tests without running any tests."""
> + activate_logging()
> execute_setup_common(*args, **kwargs)
>
> # This is called from script-style iotests with a single point of entry
> def script_main(test_function, *args, **kwargs):
> """Run script-style tests outside of the unittest framework"""
> + activate_logging()
> execute_test(test_function, *args, **kwargs)
>
> # This is called from unittest style iotests
> --
> 2.21.0
>
--
Eduardo