Re: [Qemu-devel] [PATCH v2 22/23] tests: Run the iotests during "make check" again

[Philippe Mathieu-Daudé]

On 7/17/19 3:43 PM, Alex Bennée wrote:
> From: Thomas Huth <address@hidden>
> 
> People often forget to run the iotests before submitting patches or pull
> requests - this is likely due to the fact that we do not run the tests
> during our mandatory "make check" tests yet. Now that we've got a proper
> "auto" group of iotests that should be fine to run in every environment,
> we can enable the iotests during "make check" again by running the "auto"
> tests by default from the check-block.sh script.
> 
> Some cases still need to be checked first, though: iotests need bash and
> GNU sed (otherwise they fail), and if gprof is enabled, it spoils the
> output of some test cases causing them to fail. So if we detect that one
> of the required programs is missing or that gprof is enabled, we still
> have to skip the iotests to avoid failures.
> 
> And finally, since we are using check-block.sh now again, this patch also
> removes the qemu-iotests-quick.sh script since we do not need that anymore
> (and having two shell wrapper scripts around the block tests seems rather
> confusing than helpful).
> 
> Signed-off-by: Thomas Huth <address@hidden>
> [AJB: -makecheck to check-block.sh, move check-block to start and gate it]
> Signed-off-by: Alex Bennée <address@hidden>
> Message-Id: <address@hidden>
> Signed-off-by: Alex Bennée <address@hidden>
> ---
>  tests/Makefile.include      | 10 +++++----
>  tests/check-block.sh        | 44 ++++++++++++++++++++++++++++---------
>  tests/qemu-iotests-quick.sh |  8 -------
>  3 files changed, 40 insertions(+), 22 deletions(-)
>  delete mode 100755 tests/qemu-iotests-quick.sh
> 
> diff --git a/tests/Makefile.include b/tests/Makefile.include
> index fd7fdb86586..6f02dfcc019 100644
> --- a/tests/Makefile.include
> +++ b/tests/Makefile.include
> @@ -142,7 +142,7 @@ check-unit-y += tests/test-uuid$(EXESUF)
>  check-unit-y += tests/ptimer-test$(EXESUF)
>  check-unit-y += tests/test-qapi-util$(EXESUF)
>  
> -check-block-$(CONFIG_POSIX) += tests/qemu-iotests-quick.sh
> +check-block-$(call land,$(CONFIG_POSIX),$(CONFIG_SOFTMMU)) += 
> tests/check-block.sh
>  
>  # All QTests for now are POSIX-only, but the dependencies are
>  # really in libqtest, not in the testcases themselves.
> @@ -1092,8 +1092,10 @@ clean-tcg: $(CLEAN_TCG_TARGET_RULES)
>  
>  QEMU_IOTESTS_HELPERS-$(call land,$(CONFIG_SOFTMMU),$(CONFIG_LINUX)) = 
> tests/qemu-iotests/socket_scm_helper$(EXESUF)
>  
> -.PHONY: check-tests/qemu-iotests-quick.sh
> -check-tests/qemu-iotests-quick.sh: tests/qemu-iotests-quick.sh 
> qemu-img$(EXESUF) qemu-io$(EXESUF) qemu-nbd$(EXESUF) $(QEMU_IOTESTS_HELPERS-y)
> +.PHONY: check-tests/check-block.sh
> +check-tests/check-block.sh: tests/check-block.sh qemu-img$(EXESUF) \
> +             qemu-io$(EXESUF) qemu-nbd$(EXESUF) $(QEMU_IOTESTS_HELPERS-y) \
> +             $(patsubst %,%/all,$(filter %-softmmu,$(TARGET_DIRS)))
>       $<
>  
>  .PHONY: $(patsubst %, check-%, $(check-qapi-schema-y))
> @@ -1167,7 +1169,7 @@ check-acceptance: check-venv $(TESTS_RESULTS_DIR)
>  check-qapi-schema: $(patsubst %,check-%, $(check-qapi-schema-y)) 
> check-tests/qapi-schema/doc-good.texi
>  check-qtest: $(patsubst %,check-qtest-%, $(QTEST_TARGETS))
>  check-block: $(patsubst %,check-%, $(check-block-y))
> -check: check-qapi-schema check-unit check-softfloat check-qtest 
> check-decodetree
> +check: check-block check-qapi-schema check-unit check-softfloat check-qtest 
> check-decodetree
>  check-clean:
>       rm -rf $(check-unit-y) tests/*.o $(QEMU_IOTESTS_HELPERS-y)
>       rm -rf $(sort $(foreach target,$(SYSEMU_TARGET_LIST), 
> $(check-qtest-$(target)-y)) $(check-qtest-generic-y))
> diff --git a/tests/check-block.sh b/tests/check-block.sh
> index f3d12fd602d..c8b6cec3f68 100755
> --- a/tests/check-block.sh
> +++ b/tests/check-block.sh
> @@ -1,24 +1,48 @@
>  #!/bin/sh
>  
> -FORMAT_LIST="raw qcow2 qed vmdk vpc"
> +# Honor the SPEED environment variable, just like we do it for the qtests.
> +if [ "$SPEED" = "slow" ]; then
> +    format_list="raw qcow2"
> +    group=
> +elif [ "$SPEED" = "thorough" ]; then
> +    format_list="raw qcow2 qed vmdk vpc"
> +    group=
> +else
> +    format_list=qcow2
> +    group="-g auto"
> +fi
> +
>  if [ "$#" -ne 0 ]; then
> -    FORMAT_LIST="$@"
> +    format_list="$@"
> +fi
> +
> +if grep -q "TARGET_GPROF=y" *-softmmu/config-target.mak 2>/dev/null ; then
> +    echo "GPROF is enabled ==> Not running the qemu-iotests."
> +    exit 0
>  fi
>  
> -export QEMU_PROG="$PWD/x86_64-softmmu/qemu-system-x86_64"
> -export QEMU_IMG_PROG="$PWD/qemu-img"
> -export QEMU_IO_PROG="$PWD/qemu-io"
> +if [ -z "$(find . -name 'qemu-system-*' -print)" ]; then
> +    echo "No qemu-system binary available ==> Not running the qemu-iotests."
> +    exit 0
> +fi
> +
> +if ! command -v bash >/dev/null 2>&1 ; then
> +    echo "bash not available ==> Not running the qemu-iotests."
> +    exit 0
> +fi
>  
> -if [ ! -x $QEMU_PROG ]; then
> -    echo "'make check-block' requires qemu-system-x86_64"
> -    exit 1
> +if ! (sed --version | grep 'GNU sed') > /dev/null 2>&1 ; then
> +    if ! command -v gsed >/dev/null 2>&1; then
> +        echo "GNU sed not available ==> Not running the qemu-iotests."
> +        exit 0
> +    fi
>  fi
>  
>  cd tests/qemu-iotests
>  
>  ret=0
> -for FMT in $FORMAT_LIST ; do
> -    ./check -T -nocache -$FMT || ret=1
> +for fmt in $format_list ; do
> +    ./check -makecheck -$fmt $group || ret=1
>  done
>  
>  exit $ret
> diff --git a/tests/qemu-iotests-quick.sh b/tests/qemu-iotests-quick.sh
> deleted file mode 100755
> index 0e554bb9724..00000000000
> --- a/tests/qemu-iotests-quick.sh
> +++ /dev/null
> @@ -1,8 +0,0 @@
> -#!/bin/sh
> -
> -cd tests/qemu-iotests
> -
> -ret=0
> -TEST_DIR=${TEST_DIR:-/tmp/qemu-iotests-quick-$$} ./check -T -qcow2 -g quick 
> || ret=1
> -
> -exit $ret
> 

Since Gerd updated the OpenBSD image, do you know if we can run vm-test
again?

I haven't check which what got merged from this previous series:
https://lists.gnu.org/archive/html/qemu-devel/2019-01/msg07527.html