qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [PATCH v7 11/13] vfio: Add function to get dirty page l


From: Yan Zhao
Subject: Re: [Qemu-devel] [PATCH v7 11/13] vfio: Add function to get dirty page list
Date: Thu, 18 Jul 2019 21:24:56 -0400
User-agent: Mutt/1.9.4 (2018-02-28)

On Fri, Jul 19, 2019 at 02:39:10AM +0800, Kirti Wankhede wrote:
> 
> 
> On 7/12/2019 6:03 AM, Yan Zhao wrote:
> > On Tue, Jul 09, 2019 at 05:49:18PM +0800, Kirti Wankhede wrote:
> >> Dirty page tracking (.log_sync) is part of RAM copying state, where
> >> vendor driver provides the bitmap of pages which are dirtied by vendor
> >> driver through migration region and as part of RAM copy, those pages
> >> gets copied to file stream.
> >>
> >> To get dirty page bitmap:
> >> - write start address, page_size and pfn count.
> >> - read count of pfns copied.
> >>     - Vendor driver should return 0 if driver doesn't have any page to
> >>       report dirty in given range.
> >>     - Vendor driver should return -1 to mark all pages dirty for given 
> >> range.
> >> - read data_offset, where vendor driver has written bitmap.
> >> - read bitmap from the region or mmaped part of the region.
> >> - Iterate above steps till page bitmap for all requested pfns are copied.
> >>
> >> Signed-off-by: Kirti Wankhede <address@hidden>
> >> Reviewed-by: Neo Jia <address@hidden>
> >> ---
> >>  hw/vfio/migration.c           | 123 
> >> ++++++++++++++++++++++++++++++++++++++++++
> >>  hw/vfio/trace-events          |   1 +
> >>  include/hw/vfio/vfio-common.h |   2 +
> >>  3 files changed, 126 insertions(+)
> >>
> >> diff --git a/hw/vfio/migration.c b/hw/vfio/migration.c
> >> index 5fb4c5329ede..ca1a8c0f5f1f 100644
> >> --- a/hw/vfio/migration.c
> >> +++ b/hw/vfio/migration.c
> >> @@ -269,6 +269,129 @@ static int vfio_load_device_config_state(QEMUFile 
> >> *f, void *opaque)
> >>      return qemu_file_get_error(f);
> >>  }
> >>  
> >> +void vfio_get_dirty_page_list(VFIODevice *vbasedev,
> >> +                              uint64_t start_pfn,
> >> +                              uint64_t pfn_count,
> >> +                              uint64_t page_size)
> >> +{
> >> +    VFIOMigration *migration = vbasedev->migration;
> >> +    VFIORegion *region = &migration->region.buffer;
> >> +    uint64_t count = 0;
> >> +    int64_t copied_pfns = 0;
> >> +    int64_t total_pfns = pfn_count;
> >> +    int ret;
> >> +
> >> +    qemu_mutex_lock(&migration->lock);
> >> +
> >> +    while (total_pfns > 0) {
> >> +        uint64_t bitmap_size, data_offset = 0;
> >> +        uint64_t start = start_pfn + count;
> >> +        void *buf = NULL;
> >> +        bool buffer_mmaped = false;
> >> +
> >> +        ret = pwrite(vbasedev->fd, &start, sizeof(start),
> >> +                 region->fd_offset + offsetof(struct 
> >> vfio_device_migration_info,
> >> +                                              start_pfn));
> >> +        if (ret < 0) {
> >> +            error_report("%s: Failed to set dirty pages start address %d 
> >> %s",
> >> +                         vbasedev->name, ret, strerror(errno));
> >> +            goto dpl_unlock;
> >> +        }
> >> +
> >> +        ret = pwrite(vbasedev->fd, &page_size, sizeof(page_size),
> >> +                 region->fd_offset + offsetof(struct 
> >> vfio_device_migration_info,
> >> +                                              page_size));
> >> +        if (ret < 0) {
> >> +            error_report("%s: Failed to set dirty page size %d %s",
> >> +                         vbasedev->name, ret, strerror(errno));
> >> +            goto dpl_unlock;
> >> +        }
> >> +
> >> +        ret = pwrite(vbasedev->fd, &total_pfns, sizeof(total_pfns),
> >> +                 region->fd_offset + offsetof(struct 
> >> vfio_device_migration_info,
> >> +                                              total_pfns));
> >> +        if (ret < 0) {
> >> +            error_report("%s: Failed to set dirty page total pfns %d %s",
> >> +                         vbasedev->name, ret, strerror(errno));
> >> +            goto dpl_unlock;
> >> +        }
> >> +
> >> +        /* Read copied dirty pfns */
> >> +        ret = pread(vbasedev->fd, &copied_pfns, sizeof(copied_pfns),
> >> +                region->fd_offset + offsetof(struct 
> >> vfio_device_migration_info,
> >> +                                             copied_pfns));
> >> +        if (ret < 0) {
> >> +            error_report("%s: Failed to get dirty pages bitmap count %d 
> >> %s",
> >> +                         vbasedev->name, ret, strerror(errno));
> >> +            goto dpl_unlock;
> >> +        }
> >> +
> >> +        if (copied_pfns == VFIO_DEVICE_DIRTY_PFNS_NONE) {
> >> +            /*
> >> +             * copied_pfns could be 0 if driver doesn't have any page to
> >> +             * report dirty in given range
> >> +             */
> >> +            break;
> >> +        } else if (copied_pfns == VFIO_DEVICE_DIRTY_PFNS_ALL) {
> >> +            /* Mark all pages dirty for this range */
> >> +            cpu_physical_memory_set_dirty_range(start_pfn * page_size,
> >> +                                                pfn_count * page_size,
> >> +                                                DIRTY_MEMORY_MIGRATION);
> > seesm pfn_count here is not right
> 
> Changing it to total_pfns in next version
>
if it's total_pfns, then it cannot be in the loop, right?

Thanks
Yan

> Thanks,
> Kirti
> 
> >> +            break;
> >> +        }
> >> +
> >> +        bitmap_size = (BITS_TO_LONGS(copied_pfns) + 1) * sizeof(unsigned 
> >> long);
> >> +
> >> +        ret = pread(vbasedev->fd, &data_offset, sizeof(data_offset),
> >> +                region->fd_offset + offsetof(struct 
> >> vfio_device_migration_info,
> >> +                                             data_offset));
> >> +        if (ret != sizeof(data_offset)) {
> >> +            error_report("%s: Failed to get migration buffer data offset 
> >> %d",
> >> +                         vbasedev->name, ret);
> >> +            goto dpl_unlock;
> >> +        }
> >> +
> >> +        if (region->mmaps) {
> >> +            buf = find_data_region(region, data_offset, bitmap_size);
> >> +        }
> >> +
> >> +        buffer_mmaped = (buf != NULL) ? true : false;
> >> +
> >> +        if (!buffer_mmaped) {
> >> +            buf = g_try_malloc0(bitmap_size);
> >> +            if (!buf) {
> >> +                error_report("%s: Error allocating buffer ", __func__);
> >> +                goto dpl_unlock;
> >> +            }
> >> +
> >> +            ret = pread(vbasedev->fd, buf, bitmap_size,
> >> +                        region->fd_offset + data_offset);
> >> +            if (ret != bitmap_size) {
> >> +                error_report("%s: Failed to get dirty pages bitmap %d",
> >> +                             vbasedev->name, ret);
> >> +                g_free(buf);
> >> +                goto dpl_unlock;
> >> +            }
> >> +        }
> >> +
> >> +        cpu_physical_memory_set_dirty_lebitmap((unsigned long *)buf,
> >> +                                               (start_pfn + count) * 
> >> page_size,
> >> +                                                copied_pfns);
> >> +        count      += copied_pfns;
> >> +        total_pfns -= copied_pfns;
> >> +
> >> +        if (!buffer_mmaped) {
> >> +            g_free(buf);
> >> +        }
> >> +    }
> >> +
> >> +    trace_vfio_get_dirty_page_list(vbasedev->name, start_pfn, pfn_count,
> >> +                                   page_size);
> >> +
> >> +dpl_unlock:
> >> +    qemu_mutex_unlock(&migration->lock);
> >> +}
> >> +
> >>  /* ---------------------------------------------------------------------- 
> >> */
> >>  
> >>  static int vfio_save_setup(QEMUFile *f, void *opaque)
> >> diff --git a/hw/vfio/trace-events b/hw/vfio/trace-events
> >> index ac065b559f4e..414a5e69ec5e 100644
> >> --- a/hw/vfio/trace-events
> >> +++ b/hw/vfio/trace-events
> >> @@ -160,3 +160,4 @@ vfio_save_complete_precopy(char *name) " (%s)"
> >>  vfio_load_device_config_state(char *name) " (%s)"
> >>  vfio_load_state(char *name, uint64_t data) " (%s) data 0x%"PRIx64
> >>  vfio_load_state_device_data(char *name, uint64_t data_offset, uint64_t 
> >> data_size) " (%s) Offset 0x%"PRIx64" size 0x%"PRIx64
> >> +vfio_get_dirty_page_list(char *name, uint64_t start, uint64_t pfn_count, 
> >> uint64_t page_size) " (%s) start 0x%"PRIx64" pfn_count 0x%"PRIx64 " page 
> >> size 0x%"PRIx64
> >> diff --git a/include/hw/vfio/vfio-common.h b/include/hw/vfio/vfio-common.h
> >> index a022484d2636..dc1b83a0b4ef 100644
> >> --- a/include/hw/vfio/vfio-common.h
> >> +++ b/include/hw/vfio/vfio-common.h
> >> @@ -222,5 +222,7 @@ int vfio_spapr_remove_window(VFIOContainer *container,
> >>  
> >>  int vfio_migration_probe(VFIODevice *vbasedev, Error **errp);
> >>  void vfio_migration_finalize(VFIODevice *vbasedev);
> >> +void vfio_get_dirty_page_list(VFIODevice *vbasedev, uint64_t start_pfn,
> >> +                               uint64_t pfn_count, uint64_t page_size);
> >>  
> >>  #endif /* HW_VFIO_VFIO_COMMON_H */
> >> -- 
> >> 2.7.0
> >>



reply via email to

[Prev in Thread] Current Thread [Next in Thread]