[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v2] tests/boot_linux_console: add a test for ris
From: |
Chih-Min Chao |
Subject: |
Re: [Qemu-devel] [PATCH v2] tests/boot_linux_console: add a test for riscv64 + virt |
Date: |
Tue, 16 Jul 2019 21:56:10 +0800 |
On Tue, Jul 16, 2019 at 12:34 AM Alistair Francis <address@hidden>
wrote:
> On Mon, Jul 15, 2019 at 6:02 AM Philippe Mathieu-Daudé
> <address@hidden> wrote:
> >
> > On 7/15/19 1:09 PM, Chih-Min Chao wrote:
> > > On Mon, Jul 15, 2019 at 5:15 PM Philippe Mathieu-Daudé
> > > <address@hidden <mailto:address@hidden>> wrote:
> > >
> > > On 7/15/19 11:08 AM, Chih-Min Chao wrote:
> > > > Similar to the mips + malta test, it boots a Linux kernel on a
> virt
> > > > board and verify the serial is working. Also, it relies on the
> serial
> > > > device set by the machine itself.
> > > >
> > > > If riscv64 is a target being built, "make check-acceptance" will
> > > > automatically include this test by the use of the "arch:riscv64"
> tags.
> > > >
> > > > Alternatively, this test can be run using:
> > > >
> > > > $ avocado run -t arch:riscv64 tests/acceptance
> > > >
> > > > packages
> > > > debian official
> > > > binutils-riscv64-linux-gnu_2.32-8
> > > > opensbi_0.4-1_all
> > > > linux-image-4.19.0-5-riscv64 4.19.37-4
> > > > third-party
> > > >
> > >
> https://github.com/groeck/linux-build-test/rootfs/riscv64/rootfs.cpio.gz
> > > > (the repo is also used in mips target acceptance)
> > > >
> > > > Signed-off-by: Chih-Min Chao <address@hidden
> > > <mailto:address@hidden>>
> > > > ---
> > > > .travis.yml | 2 +-
> > > > tests/acceptance/boot_linux_console.py | 66
> > > ++++++++++++++++++++++++++++++++++
> > > > 2 files changed, 67 insertions(+), 1 deletion(-)
> > > >
> > > > diff --git a/.travis.yml b/.travis.yml
> > > > index 5d3d6ee..21fcead 100644
> > > > --- a/.travis.yml
> > > > +++ b/.travis.yml
> > > > @@ -232,7 +232,7 @@ matrix:
> > > >
> > > > # Acceptance (Functional) tests
> > > > - env:
> > > > - - CONFIG="--python=/usr/bin/python3
> > >
>
> --target-list=x86_64-softmmu,mips-softmmu,mips64el-softmmu,aarch64-softmmu,arm-softmmu,s390x-softmmu,alpha-softmmu"
> > > > + - CONFIG="--python=/usr/bin/python3
> > >
>
> --target-list=x86_64-softmmu,mips-softmmu,mips64el-softmmu,aarch64-softmmu,arm-softmmu,s390x-softmmu,alpha-softmmu,riscv64-softmmu"
> > > > - TEST_CMD="make check-acceptance"
> > > > after_failure:
> > > > - cat tests/results/latest/job.log
> > > > diff --git a/tests/acceptance/boot_linux_console.py
> > > b/tests/acceptance/boot_linux_console.py
> > > > index 3215950..0f638bc 100644
> > > > --- a/tests/acceptance/boot_linux_console.py
> > > > +++ b/tests/acceptance/boot_linux_console.py
> > > > @@ -354,3 +354,69 @@ class BootLinuxConsole(Test):
> > > > self.vm.launch()
> > > > console_pattern = 'Kernel command line: %s' %
> > > kernel_command_line
> > > > self.wait_for_console_pattern(console_pattern)
> > > > +
> > > > + def test_riscv64_virt(self):
> > > > + """
> > > > + :avocado: tags=arch:riscv64
> > > > + :avocado: tags=machine:virt
> > > > + """
> > > > + deb_url = ('https://snapshot.debian.org/archive/debian/
> '
> > > > +
> '20190424T171759Z/pool/main/b/binutils/'
> > > > +
> > > 'binutils-riscv64-linux-gnu_2.32-8_amd64.deb')
> > > > + deb_hash = ('7fe376fd4452696c03acd508d6d613ca553ea15e')
> > > > + deb_path = self.fetch_asset(deb_url,
> asset_hash=deb_hash)
> > > > + objcopy_path = '/usr/bin/riscv64-linux-gnu-objcopy'
> > > > + objcopy_path = self.extract_from_deb(deb_path,
> objcopy_path)
> > > > + libbfd_path =
> > > '/usr/lib/x86_64-linux-gnu/libbfd-2.32-riscv64.so
> > > <http://libbfd-2.32-riscv64.so>'
> > > > + libbfd_path = self.extract_from_deb(deb_path,
> libbfd_path)
> > > > + process.run('ls -al %s' % (objcopy_path))
> > > > +
> > > > + deb_url = ('https://snapshot.debian.org/archive/debian/
> '
> > > > + '20190708T032337Z/pool/main/o/opensbi/'
> > > > + 'opensbi_0.4-1_all.deb')
> > > > + deb_hash = ('2319dcd702958291d323acf5649fd98a11d90112')
> > > > + deb_path = self.fetch_asset(deb_url,
> asset_hash=deb_hash)
> > > > + opensbi_path = ('/usr/lib/riscv64-linux-gnu/opensbi/'
> > > > + 'qemu/virt/fw_jump.elf')
> > > > + opensbi_path = self.extract_from_deb(deb_path,
> opensbi_path)
> > > > +
> > > > + deb_url =
> > > ('https://snapshot.debian.org/archive/debian-ports/'
> > > > + '20190620T095935Z/pool-riscv64/main/l/linux/'
> > > > +
> > > 'linux-image-4.19.0-5-riscv64_4.19.37-4_riscv64.deb')
> > > > + deb_hash = ('bf5b5680c41d92134d22caef4fbd277c5217e1f0')
> > > > + deb_path = self.fetch_asset(deb_url,
> asset_hash=deb_hash)
> > > > + kernel_path = '/boot/vmlinux-4.19.0-5-riscv64'
> > > > + kernel_path = self.extract_from_deb(deb_path,
> kernel_path)
> > > > + kimage_path = self.workdir + "/Image"
> > > > + env = os.environ
> > > > + env['LD_LIBRARY_PATH'] = ('%s:' %
> > > (os.path.dirname(libbfd_path)) +
> > > > + env.get('LD_LIBRARY_PATH', ''))
> > > > + process.run(('%s -O binary -O binary -R'
> > > > + '.note -R .note.gnu.build-id -R .comment -S
> > > %s %s') %
> > > > + (objcopy_path, kernel_path, kimage_path))
> > >
> > > Please explain why you need to do that...
> > >
> > > Also note these tests are run on other host architecture than x86,
> at
> > > least ppc64/s390x (so this won't work there).
> > >
> > > it is because riscv64 vmlinux doesn't have physical loading address
> > > information and
> > > depends on certain stage bootloader to move kernel raw data to specific
> > > physical address (0x8020_0000)
> > >
> > > The vmlinux program headers are
> > > Type Offset VirtAddr PhysAddr
> > > FileSiz MemSiz Flg Align
> > > LOAD 0x001000 0xffffffe000000000 0x0000000000000000
> 0x0303a6
> > > 0x0303a6 R E 0x1000
> > > LOAD 0x032000 0xffffffe000031000 0x0000000000031000
> 0x828f0c
> > > 0x828f0c RWE 0x1000
> > > NOTE 0x85aec0 0xffffffe000859ec0 0x0000000000859ec0
> 0x00004c
> > > 0x00004c R 0x4
> > >
> > > For legacy bootloader, bbl, It can handle payload in ELF format.
> > > However, for the newer OpenSBI, it can only handle raw data and
> > > debian doesn't provide linux image in raw data format.
>
> This doesn't sound right. You should just be able to say -kernel
> <anything> and it should work. It has worked for me with vmlinux and
> Image files when using master (not the 4.0 release but master/4.1).
> Although all of my testing was with the 5.1 kernel, so maybe there is
> a difference there?
>
> What isn't working for you? Can you include the errors and output of -d
> in_asm?
>
>
> Alistair
>
Hi Alistair,
I have come across error before starting target simulation. What I
means is to execute
qemu-system-riscv64 -M virt -m 256M -nographic -bios
./opensbi/build/platform/qemu/virt/firmware/fw_jump.elf -kernel vmlinux
then get the error message
rom: requested regions overlap (rom mrom.reset.
free=0x000000000001eb7c, addr=0x0000000000001000)
qemu-system-riscv64: rom check and register reset failed
chihmin.chao
> >
> > I think you should be able to use -device loader,file=... here, then no
> > need to use objcopy.
> >
> > Cc'ing Alistair who is an expert on this.
> >
> > > > +
> > > > + initrd_url =
> > > ('https://github.com/groeck/linux-build-test/raw/'
> > > > +
> > > '8584a59ed9e5eb5ee7ca91f6d74bbb06619205b8/rootfs/'
> > > > + 'riscv64/rootfs.cpio.gz')
> > > > + initrd_hash = 'f4867d263754961b6f626cdcdc0cb334c47e3b49'
> > > > + initrd_path = self.fetch_asset(initrd_url,
> > > asset_hash=initrd_hash)
> > > > +
> > > > + self.vm.set_machine('virt')
> > > > + self.vm.set_console()
> > > > + kernel_command_line = (self.KERNEL_COMMON_COMMAND_LINE
> > > > + + 'console=ttyS0 noreboot')
> > > > + self.vm.add_args('-bios', opensbi_path,
> > > > + '-kernel', kimage_path,
> > > > + '-initrd', initrd_path,
> > > > + '-append', kernel_command_line,
> > > > + '-no-reboot')
> > > > +
> > > > + self.vm.launch()
> > > > + self.wait_for_console_pattern('Boot successful.')
> > > > +
> > > > + self.exec_command_and_wait_for_pattern('cat
> /proc/cpuinfo',
> > > > + 'isa')
> > > > + self.exec_command_and_wait_for_pattern('uname -a',
> > > > + 'SMP Debian')
> > > > + self.exec_command_and_wait_for_pattern('reboot',
> > > > + 'reboot:
> > > Restarting system')
> > > >
> > >
> >
>
- [Qemu-devel] [PATCH v2] tests/boot_linux_console: add a test for riscv64 + virt, Chih-Min Chao, 2019/07/15
- Re: [Qemu-devel] [PATCH v2] tests/boot_linux_console: add a test for riscv64 + virt, Philippe Mathieu-Daudé, 2019/07/15
- Re: [Qemu-devel] [PATCH v2] tests/boot_linux_console: add a test for riscv64 + virt, Chih-Min Chao, 2019/07/15
- Re: [Qemu-devel] [PATCH v2] tests/boot_linux_console: add a test for riscv64 + virt, Philippe Mathieu-Daudé, 2019/07/15
- Re: [Qemu-devel] [PATCH v2] tests/boot_linux_console: add a test for riscv64 + virt, Alistair Francis, 2019/07/15
- Re: [Qemu-devel] [PATCH v2] tests/boot_linux_console: add a test for riscv64 + virt,
Chih-Min Chao <=
- Re: [Qemu-devel] [PATCH v2] tests/boot_linux_console: add a test for riscv64 + virt, Alistair Francis, 2019/07/16
- Re: [Qemu-devel] [PATCH v2] tests/boot_linux_console: add a test for riscv64 + virt, Philippe Mathieu-Daudé, 2019/07/16
- Re: [Qemu-devel] [PATCH v2] tests/boot_linux_console: add a test for riscv64 + virt, Alistair Francis, 2019/07/16
- Re: [Qemu-devel] [PATCH v2] tests/boot_linux_console: add a test for riscv64 + virt, Chih-Min Chao, 2019/07/17
- Re: [Qemu-devel] [PATCH v2] tests/boot_linux_console: add a test for riscv64 + virt, Alistair Francis, 2019/07/17
- Re: [Qemu-devel] [PATCH v2] tests/boot_linux_console: add a test for riscv64 + virt, Chih-Min Chao, 2019/07/18
- Re: [Qemu-devel] [PATCH v2] tests/boot_linux_console: add a test for riscv64 + virt, Alistair Francis, 2019/07/18
- Re: [Qemu-devel] [PATCH v2] tests/boot_linux_console: add a test for riscv64 + virt, Chih-Min Chao, 2019/07/18