qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [RFC v2 PATCH 3/3] spapr: Add Hcalls to support PAPR NV


From: Shivaprasad G Bhat
Subject: Re: [Qemu-devel] [RFC v2 PATCH 3/3] spapr: Add Hcalls to support PAPR NVDIMM device
Date: Thu, 11 Jul 2019 11:16:01 +0530
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:52.0) Gecko/20100101 Thunderbird/52.5.2



On 05/14/2019 10:08 AM, David Gibson wrote:
On Mon, May 13, 2019 at 04:28:36AM -0500, Shivaprasad G Bhat wrote:
This patch implements few of the necessary hcalls for the nvdimm support.

PAPR semantics is such that each NVDIMM device is comprising of multiple
SCM(Storage Class Memory) blocks. The guest requests the hypervisor to bind
each of the SCM blocks of the NVDIMM device using hcalls. There can be
SCM block unbind requests in case of driver errors or unplug(not supported now)
use cases. The NVDIMM label read/writes are done through hcalls.

Since each virtual NVDIMM device is divided into multiple SCM blocks, the bind,
unbind, and queries using hcalls on those blocks can come independently. This
doesn't fit well into the qemu device semantics, where the map/unmap are done
at the (whole)device/object level granularity. The patch doesnt actually
bind/unbind on hcalls but let it happen at the object_add/del phase itself
instead.

The guest kernel makes bind/unbind requests for the virtual NVDIMM device at the
region level granularity. Without interleaving, each virtual NVDIMM device is
presented as separate region. There is no way to configure the virtual NVDIMM
interleaving for the guests today. So, there is no way a partial bind/unbind
request can come for the vNVDIMM in a hcall for a subset of SCM blocks of a
virtual NVDIMM. Hence it is safe to do bind/unbind everything during the
object_add/del.

Signed-off-by: Shivaprasad G Bhat <address@hidden>
---
  hw/ppc/spapr_hcall.c   |  202 ++++++++++++++++++++++++++++++++++++++++++++++++
  include/hw/ppc/spapr.h |    7 +-
  2 files changed, 208 insertions(+), 1 deletion(-)

diff --git a/hw/ppc/spapr_hcall.c b/hw/ppc/spapr_hcall.c
index 6c16d2b120..b6e7d04dcf 100644
--- a/hw/ppc/spapr_hcall.c
+++ b/hw/ppc/spapr_hcall.c
@@ -3,11 +3,13 @@
  #include "sysemu/hw_accel.h"
  #include "sysemu/sysemu.h"
  #include "qemu/log.h"
+#include "qemu/range.h"
  #include "qemu/error-report.h"
  #include "cpu.h"
  #include "exec/exec-all.h"
  #include "helper_regs.h"
  #include "hw/ppc/spapr.h"
+#include "hw/ppc/spapr_drc.h"
  #include "hw/ppc/spapr_cpu_core.h"
  #include "mmu-hash64.h"
  #include "cpu-models.h"
@@ -16,6 +18,7 @@
  #include "hw/ppc/spapr_ovec.h"
  #include "mmu-book3s-v3.h"
  #include "hw/mem/memory-device.h"
+#include "hw/mem/nvdimm.h"
static bool has_spr(PowerPCCPU *cpu, int spr)
  {
@@ -1795,6 +1798,199 @@ static target_ulong h_update_dt(PowerPCCPU *cpu, 
SpaprMachineState *spapr,
      return H_SUCCESS;
  }
+static target_ulong h_scm_read_metadata(PowerPCCPU *cpu,
+                                        SpaprMachineState *spapr,
+                                        target_ulong opcode,
+                                        target_ulong *args)
+{
+    uint32_t drc_index = args[0];
+    uint64_t offset = args[1];
+    uint64_t numBytesToRead = args[2];
+    SpaprDrc *drc = spapr_drc_by_index(drc_index);
+    NVDIMMDevice *nvdimm = NULL;
+    NVDIMMClass *ddc = NULL;
+
+    if (drc && spapr_drc_type(drc) != SPAPR_DR_CONNECTOR_TYPE_PMEM) {
+        return H_PARAMETER;
+    }
+
+    if (numBytesToRead != 1 && numBytesToRead != 2 &&
+        numBytesToRead != 4 && numBytesToRead != 8) {
+        return H_P3;
+    }
+
+    nvdimm = NVDIMM(drc->dev);
+    if ((offset + numBytesToRead < offset) ||
+        (nvdimm->label_size < numBytesToRead + offset)) {
+        return H_P2;
+    }
+
+    ddc = NVDIMM_GET_CLASS(nvdimm);
+    ddc->read_label_data(nvdimm, &args[0], numBytesToRead, offset);
I'm pretty sure this will need some sort of byteswap.  args[0] is
effectively in host native order (since it maps to a register, not
memory).  But the guest will have to assume some byteorder (BE, I'm
guessing, because PAPR) in order to map that register to an in-memory
byteorder.  So, you'll need to compensate for that here.

You are right, I have figured out the required changes working with the kernel
team. Will post it in the next version.


+    return H_SUCCESS;
+}
+
+
+static target_ulong h_scm_write_metadata(PowerPCCPU *cpu,
+                                         SpaprMachineState *spapr,
+                                         target_ulong opcode,
+                                         target_ulong *args)
+{
+    uint32_t drc_index = args[0];
+    uint64_t offset = args[1];
+    uint64_t data = args[2];
+    int8_t numBytesToWrite = args[3];
+    SpaprDrc *drc = spapr_drc_by_index(drc_index);
+    NVDIMMDevice *nvdimm = NULL;
+    DeviceState *dev = NULL;
+    NVDIMMClass *ddc = NULL;
+
+    if (drc && spapr_drc_type(drc) != SPAPR_DR_CONNECTOR_TYPE_PMEM) {
+        return H_PARAMETER;
+    }
+
+    if (numBytesToWrite != 1 && numBytesToWrite != 2 &&
+        numBytesToWrite != 4 && numBytesToWrite != 8) {
+        return H_P4;
+    }
+
+    dev = drc->dev;
+    nvdimm = NVDIMM(dev);
+    if ((nvdimm->label_size < numBytesToWrite + offset) ||
+        (offset + numBytesToWrite < offset)) {
+        return H_P2;
+    }
+
+    ddc = NVDIMM_GET_CLASS(nvdimm);
+    ddc->write_label_data(nvdimm, &data, numBytesToWrite, offset);
Likewise here.

+
+    return H_SUCCESS;
+}
+
+static target_ulong h_scm_bind_mem(PowerPCCPU *cpu, SpaprMachineState *spapr,
+                                        target_ulong opcode,
+                                        target_ulong *args)
+{
+    uint32_t drc_index = args[0];
+    uint64_t starting_idx = args[1];
+    uint64_t no_of_scm_blocks_to_bind = args[2];
+    uint64_t target_logical_mem_addr = args[3];
+    uint64_t continue_token = args[4];
+    uint64_t size;
+    uint64_t total_no_of_scm_blocks;
+
+    SpaprDrc *drc = spapr_drc_by_index(drc_index);
+    hwaddr addr;
+    DeviceState *dev = NULL;
+    PCDIMMDevice *dimm = NULL;
+    Error *local_err = NULL;
+
+    if (drc && spapr_drc_type(drc) != SPAPR_DR_CONNECTOR_TYPE_PMEM) {
+        return H_PARAMETER;
+    }
+
+    dev = drc->dev;
+    dimm = PC_DIMM(dev);
+
+    size = object_property_get_uint(OBJECT(dimm),
+                                    PC_DIMM_SIZE_PROP, &local_err);
+    if (local_err) {
+        error_report_err(local_err);
+        return H_PARAMETER;
+    }
+
+    total_no_of_scm_blocks = size / SPAPR_MINIMUM_SCM_BLOCK_SIZE;
+
+    if ((starting_idx > total_no_of_scm_blocks) ||
+        (no_of_scm_blocks_to_bind > total_no_of_scm_blocks)) {
+        return H_P2;
+    }
+
+    if (((starting_idx + no_of_scm_blocks_to_bind) < starting_idx) ||
+        ((starting_idx + no_of_scm_blocks_to_bind) > total_no_of_scm_blocks)) {
+        return H_P3;
+    }
+
+    /* Currently qemu assigns the address. */
+    if (target_logical_mem_addr != 0xffffffffffffffff) {
+        return H_OVERLAP;
So, only supporting one mode of the interface is reasonable.  However,
it seems a somewhat unnatural way to handle the PAPR interface.  It
seems to me it would be more natural to instantiate the underlying
NVDIMM objects so that they're not in address_space_memory, but rather
in their own initially inaccssible address_space.  Then the BIND call
would alias a chunk of address_space_memory into the NVDIMMs address
space.

The pre-plug checks require the memory region to be initialized before reaching
there. So, I cant avoid the minimal initialization with the size calling
memory_region_init() at the nvdimm_prepare_memory_region(). If I delay
the aliasing till the bind hcall, things seem to work.

Are you suggesting me to do something like this?

https://github.ibm.com/shivapbh/qemu-1/commit/04e0a5c7ef71db942be5ced936fde93dd7bb3ee4

+    }
+
+    /*
+     * Currently continue token should be zero qemu has already bound
+     * everything and this hcall doesnt return H_BUSY.
+     */
+    if (continue_token > 0) {
+        return H_P5;
+    }
+
+    /* NB : Already bound, Return target logical address in R4 */
+    addr = object_property_get_uint(OBJECT(dimm),
+                                    PC_DIMM_ADDR_PROP, &local_err);
+    if (local_err) {
+        error_report_err(local_err);
+        return H_PARAMETER;
+    }
+
+    args[1] = addr;
Don't you need to adjust this if start_idx is non-zero?

Since I don't support partial bind request, start_idx can never be non-zero. I think
I need to enforce it with more checks here.


+    args[2] = no_of_scm_blocks_to_bind;
+
+    return H_SUCCESS;
+}
+
+static target_ulong h_scm_unbind_mem(PowerPCCPU *cpu, SpaprMachineState *spapr,
+                                        target_ulong opcode,
+                                        target_ulong *args)
+{
+    uint32_t drc_index = args[0];
+    uint64_t starting_scm_logical_addr = args[1];
+    uint64_t no_of_scm_blocks_to_unbind = args[2];
+    uint64_t size_to_unbind;
+    uint64_t continue_token = args[3];
+    Range blockrange = range_empty;
+    Range nvdimmrange = range_empty;
+    SpaprDrc *drc = spapr_drc_by_index(drc_index);
+    DeviceState *dev = NULL;
+    PCDIMMDevice *dimm = NULL;
+    uint64_t size, addr;
+
+    if (drc && spapr_drc_type(drc) != SPAPR_DR_CONNECTOR_TYPE_PMEM) {
+        return H_PARAMETER;
+    }
+
+    /* Check if starting_scm_logical_addr is block aligned */
+    if (!QEMU_IS_ALIGNED(starting_scm_logical_addr,
+                         SPAPR_MINIMUM_SCM_BLOCK_SIZE)) {
+        return H_P2;
+    }
+
+    dev = drc->dev;
+    dimm = PC_DIMM(dev);
+    size = object_property_get_int(OBJECT(dimm), PC_DIMM_SIZE_PROP, NULL);
+    addr = object_property_get_int(OBJECT(dimm), PC_DIMM_ADDR_PROP, NULL);
+
+    range_init_nofail(&nvdimmrange, addr, size);
+
+    size_to_unbind = no_of_scm_blocks_to_unbind * SPAPR_MINIMUM_SCM_BLOCK_SIZE;
+
+
+    range_init_nofail(&blockrange, starting_scm_logical_addr, size_to_unbind);
+
+    if (!range_contains_range(&nvdimmrange, &blockrange)) {
+        return H_P3;
+    }
+
+    if (continue_token > 0) {
+        return H_P3;
+    }
+
+    args[1] = no_of_scm_blocks_to_unbind;
+
+    /*NB : dont do anything, let object_del take care of this for now. */
+    return H_SUCCESS;
+}
+
  static spapr_hcall_fn papr_hypercall_table[(MAX_HCALL_OPCODE / 4) + 1];
  static spapr_hcall_fn kvmppc_hypercall_table[KVMPPC_HCALL_MAX - 
KVMPPC_HCALL_BASE + 1];
@@ -1894,6 +2090,12 @@ static void hypercall_register_types(void)
      /* qemu/KVM-PPC specific hcalls */
      spapr_register_hypercall(KVMPPC_H_RTAS, h_rtas);
+ /* qemu/scm specific hcalls */
+    spapr_register_hypercall(H_SCM_READ_METADATA, h_scm_read_metadata);
+    spapr_register_hypercall(H_SCM_WRITE_METADATA, h_scm_write_metadata);
+    spapr_register_hypercall(H_SCM_BIND_MEM, h_scm_bind_mem);
+    spapr_register_hypercall(H_SCM_UNBIND_MEM, h_scm_unbind_mem);
+
      /* ibm,client-architecture-support support */
      spapr_register_hypercall(KVMPPC_H_CAS, h_client_architecture_support);
diff --git a/include/hw/ppc/spapr.h b/include/hw/ppc/spapr.h
index 394ea26335..48e2cc9d67 100644
--- a/include/hw/ppc/spapr.h
+++ b/include/hw/ppc/spapr.h
@@ -283,6 +283,7 @@ struct SpaprMachineState {
  #define H_P7              -60
  #define H_P8              -61
  #define H_P9              -62
+#define H_OVERLAP         -68
  #define H_UNSUPPORTED_FLAG -256
  #define H_MULTI_THREADS_ACTIVE -9005
@@ -490,8 +491,12 @@ struct SpaprMachineState {
  #define H_INT_ESB               0x3C8
  #define H_INT_SYNC              0x3CC
  #define H_INT_RESET             0x3D0
+#define H_SCM_READ_METADATA     0x3E4
+#define H_SCM_WRITE_METADATA    0x3E8
+#define H_SCM_BIND_MEM          0x3EC
+#define H_SCM_UNBIND_MEM        0x3F0
-#define MAX_HCALL_OPCODE H_INT_RESET
+#define MAX_HCALL_OPCODE        H_SCM_UNBIND_MEM
/* The hcalls above are standardized in PAPR and implemented by pHyp
   * as well.





reply via email to

[Prev in Thread] Current Thread [Next in Thread]