qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH v3 0/9] hw/block/pflash_cfi01: Add DeviceReset() han


From: Philippe Mathieu-Daudé
Subject: [Qemu-devel] [PATCH v3 0/9] hw/block/pflash_cfi01: Add DeviceReset() handler
Date: Fri, 5 Jul 2019 17:46:30 +0200

The pflash device lacks a reset() function.
When a machine is resetted, the flash might be in an
inconsistent state, leading to unexpected behavior:
https://bugzilla.redhat.com/show_bug.cgi?id=1678713
Resolve this issue by adding a DeviceReset() handler.

Fix also two minor issues, and clean a bit the codebase.

Since v1: https://lists.gnu.org/archive/html/qemu-devel/2019-05/msg00962.html
- addressed Laszlo review comments

Since v2:
- consider migration (Laszlo, Peter)

$ git backport-diff -u v2
Key:
[----] : patches are identical
[####] : number of functional differences between upstream/downstream patch
[down] : patch is downstream-only
The flags [FC] indicate (F)unctional and (C)ontextual differences, respectively

001/9:[----] [--] 'hw/block/pflash_cfi01: Removed an unused timer'
002/9:[0008] [FC] 'hw/block/pflash_cfi01: Use the correct READ_ARRAY value'
003/9:[----] [-C] 'hw/block/pflash_cfi01: Extract pflash_mode_read_array()'
004/9:[----] [--] 'hw/block/pflash_cfi01: Start state machine as READY to 
accept commands'
005/9:[----] [--] 'hw/block/pflash_cfi01: Add the DeviceReset() handler'
006/9:[----] [--] 'hw/block/pflash_cfi01: Simplify CFI_QUERY processing'
007/9:[----] [--] 'hw/block/pflash_cfi01: Improve command comments'
008/9:[----] [--] 'hw/block/pflash_cfi01: Replace DPRINTF by 
qemu_log_mask(GUEST_ERROR)'
009/9:[----] [--] 'hw/block/pflash_cfi01: Hold the PRI table offset in a 
variable'

Functional differences on patch #2 are the 6 lines added for
migration of the 'cmd' field, and the updated commit description.

Regards,

Phil.

Philippe Mathieu-Daudé (9):
  hw/block/pflash_cfi01: Removed an unused timer
  hw/block/pflash_cfi01: Use the correct READ_ARRAY value
  hw/block/pflash_cfi01: Extract pflash_mode_read_array()
  hw/block/pflash_cfi01: Start state machine as READY to accept commands
  hw/block/pflash_cfi01: Add the DeviceReset() handler
  hw/block/pflash_cfi01: Simplify CFI_QUERY processing
  hw/block/pflash_cfi01: Improve command comments
  hw/block/pflash_cfi01: Replace DPRINTF by qemu_log_mask(GUEST_ERROR)
  hw/block/pflash_cfi01: Hold the PRI table offset in a variable

 hw/block/pflash_cfi01.c | 148 ++++++++++++++++++++++------------------
 hw/block/trace-events   |   1 +
 2 files changed, 81 insertions(+), 68 deletions(-)

-- 
2.20.1




reply via email to

[Prev in Thread] Current Thread [Next in Thread]