[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PULL v2 4/4] Makefile: Reuse all's recursion machinery for
From: |
Markus Armbruster |
Subject: |
[Qemu-devel] [PULL v2 4/4] Makefile: Reuse all's recursion machinery for clean and install |
Date: |
Wed, 3 Jul 2019 13:47:14 +0200 |
Targets "clean" and "install" run make recursively in a for loop.
This ignores -j and -k. Target "all" depends on SUBDIR/all to recurse
into each SUBDIR. Behaves nicely with -j and -k. Put that to use for
"clean" and "install": depend on SUBDIR/clean or SUBDIR/install,
respectively, and delete the loop.
Signed-off-by: Markus Armbruster <address@hidden>
Reviewed-by: Richard Henderson <address@hidden>
Message-Id: <address@hidden>
Reviewed-by: Philippe Mathieu-Daudé <address@hidden>
---
Makefile | 53 +++++++++++++++++++++++++----------------------------
1 file changed, 25 insertions(+), 28 deletions(-)
diff --git a/Makefile b/Makefile
index 34bbcfc590..3e5bfb5da1 100644
--- a/Makefile
+++ b/Makefile
@@ -454,20 +454,22 @@ config-host.h-timestamp: config-host.mak
qemu-options.def: $(SRC_PATH)/qemu-options.hx $(SRC_PATH)/scripts/hxtool
$(call quiet-command,sh $(SRC_PATH)/scripts/hxtool -h < $< >
$@,"GEN","$@")
-SUBDIR_RULES=$(addsuffix /all, $(TARGET_DIRS))
-SOFTMMU_SUBDIR_RULES=$(filter %-softmmu/all,$(SUBDIR_RULES))
+TARGET_DIRS_RULES := $(foreach t, all clean install, $(addsuffix /$(t),
$(TARGET_DIRS)))
-$(SOFTMMU_SUBDIR_RULES): $(authz-obj-y)
-$(SOFTMMU_SUBDIR_RULES): $(block-obj-y)
-$(SOFTMMU_SUBDIR_RULES): $(chardev-obj-y)
-$(SOFTMMU_SUBDIR_RULES): $(crypto-obj-y)
-$(SOFTMMU_SUBDIR_RULES): $(io-obj-y)
-$(SOFTMMU_SUBDIR_RULES): config-all-devices.mak
-$(SOFTMMU_SUBDIR_RULES): $(edk2-decompressed)
+SOFTMMU_ALL_RULES=$(filter %-softmmu/all, $(TARGET_DIRS_RULES))
+$(SOFTMMU_ALL_RULES): $(authz-obj-y)
+$(SOFTMMU_ALL_RULES): $(block-obj-y)
+$(SOFTMMU_ALL_RULES): $(chardev-obj-y)
+$(SOFTMMU_ALL_RULES): $(crypto-obj-y)
+$(SOFTMMU_ALL_RULES): $(io-obj-y)
+$(SOFTMMU_ALL_RULES): config-all-devices.mak
+$(SOFTMMU_ALL_RULES): $(edk2-decompressed)
-.PHONY: $(SUBDIR_RULES)
-$(SUBDIR_RULES):
- $(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C $(dir $@) V="$(V)"
TARGET_DIR="$(dir $@)" all,)
+.PHONY: $(TARGET_DIRS_RULES)
+# The $(TARGET_DIRS_RULES) are of the form SUBDIR/GOAL, so that
+# $(dir $@) yields the sub-directory, and $(notdir $@) yields the sub-goal
+$(TARGET_DIRS_RULES):
+ $(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C $(dir $@) V="$(V)"
TARGET_DIR="$(dir $@)" $(notdir $@),)
DTC_MAKE_ARGS=-I$(SRC_PATH)/dtc VPATH=$(SRC_PATH)/dtc -C dtc V="$(V)"
LIBFDT_srcdir=$(SRC_PATH)/dtc/libfdt
DTC_CFLAGS=$(CFLAGS) $(QEMU_CFLAGS)
@@ -506,19 +508,19 @@ subdir-dtc: dtc/all
subdir-capstone: capstone/all
subdir-slirp: slirp/all
-$(SUBDIR_RULES): libqemuutil.a $(common-obj-y) \
+$(filter %/all, $(TARGET_DIRS_RULES)): libqemuutil.a $(common-obj-y) \
$(qom-obj-y) $(crypto-user-obj-$(CONFIG_USER_ONLY))
ROM_DIRS = $(addprefix pc-bios/, $(ROMS))
-ROMSUBDIR_RULES=$(addsuffix /all, $(ROM_DIRS))
+ROM_DIRS_RULES=$(foreach t, all clean, $(addsuffix /$(t), $(ROM_DIRS)))
# Only keep -O and -g cflags
-.PHONY: $(ROMSUBDIR_RULES)
-$(ROMSUBDIR_RULES):
- $(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C $(dir $@) V="$(V)"
TARGET_DIR="$(dir $@)" CFLAGS="$(filter -O% -g%,$(CFLAGS))",)
+.PHONY: $(ROM_DIRS_RULES)
+$(ROM_DIRS_RULES):
+ $(call quiet-command,$(MAKE) $(SUBDIR_MAKEFLAGS) -C $(dir $@) V="$(V)"
TARGET_DIR="$(dir $@)" CFLAGS="$(filter -O% -g%,$(CFLAGS))" $(notdir $@),)
-ALL_SUBDIRS=$(TARGET_DIRS) $(ROM_DIRS)
-
-recurse-all: $(SUBDIR_RULES) $(ROMSUBDIR_RULES)
+recurse-all: $(addsuffix /all, $(TARGET_DIRS) $(ROM_DIRS))
+recurse-clean: $(addsuffix /clean, $(TARGET_DIRS) $(ROM_DIRS))
+recurse-install: $(addsuffix /install, $(TARGET_DIRS))
$(BUILD_DIR)/version.o: $(SRC_PATH)/version.rc config-host.h
$(call quiet-command,$(WINDRES) -I$(BUILD_DIR) -o $@
$<,"RC","version.o")
@@ -667,7 +669,7 @@ clean-coverage:
"CLEAN", "coverage files")
endif
-clean:
+clean: recurse-clean
# avoid old build problems by removing potentially incorrect old files
rm -f config.mak op-i386.h opc-i386.h gen-op-i386.h op-arm.h opc-arm.h
gen-op-arm.h
rm -f qemu-options.def
@@ -688,9 +690,6 @@ clean:
rm -f $(foreach f,$(generated-files-y),$(f) $(f)-timestamp)
rm -f qapi-gen-timestamp
rm -rf qga/qapi-generated
- for d in $(ALL_SUBDIRS); do \
- if test -d $$d; then $(MAKE) -C $$d $@ || exit 1; fi; \
- done
rm -f config-all-devices.mak
VERSION ?= $(shell cat VERSION)
@@ -838,7 +837,8 @@ endif
ICON_SIZES=16x16 24x24 32x32 48x48 64x64 128x128 256x256 512x512
install: all $(if $(BUILD_DOCS),install-doc) install-datadir
install-localstatedir \
- $(if $(INSTALL_BLOBS),$(edk2-decompressed))
+ $(if $(INSTALL_BLOBS),$(edk2-decompressed)) \
+ recurse-install
ifneq ($(TOOLS),)
$(call install-prog,$(subst
qemu-ga,qemu-ga$(EXESUF),$(TOOLS)),$(DESTDIR)$(bindir))
endif
@@ -904,9 +904,6 @@ endif
$(INSTALL_DATA) $(SRC_PATH)/pc-bios/keymaps/$$x
"$(DESTDIR)$(qemu_datadir)/keymaps"; \
done
$(INSTALL_DATA) $(BUILD_DIR)/trace-events-all
"$(DESTDIR)$(qemu_datadir)/trace-events-all"
- for d in $(TARGET_DIRS); do \
- $(MAKE) $(SUBDIR_MAKEFLAGS) TARGET_DIR=$$d/ -C $$d $@ || exit 1 ; \
- done
.PHONY: ctags
ctags:
--
2.21.0
- [Qemu-devel] [PULL v2 0/4] Build system patches for 2019-07-02, Markus Armbruster, 2019/07/03
- [Qemu-devel] [PULL v2 4/4] Makefile: Reuse all's recursion machinery for clean and install,
Markus Armbruster <=
- [Qemu-devel] [PULL v2 1/4] Makefile: Remove code to smooth transition to config.status, Markus Armbruster, 2019/07/03
- [Qemu-devel] [PULL v2 2/4] Makefile: Drop bogus cleaning of $(ALL_SUBDIRS)/qemu-options.def, Markus Armbruster, 2019/07/03
- [Qemu-devel] [PULL v2 3/4] Makefile: Rename targets for make recursion, Markus Armbruster, 2019/07/03
- Re: [Qemu-devel] [PULL v2 0/4] Build system patches for 2019-07-02, no-reply, 2019/07/03
- Re: [Qemu-devel] [PULL v2 0/4] Build system patches for 2019-07-02, no-reply, 2019/07/03
- Re: [Qemu-devel] [PULL v2 0/4] Build system patches for 2019-07-02, Peter Maydell, 2019/07/04