[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v3 07/12] memory: Introduce memory listener hook
From: |
Dr. David Alan Gilbert |
Subject: |
Re: [Qemu-devel] [PATCH v3 07/12] memory: Introduce memory listener hook log_clear() |
Date: |
Thu, 30 May 2019 14:20:33 +0100 |
User-agent: |
Mutt/1.11.4 (2019-03-13) |
* Peter Xu (address@hidden) wrote:
> Introduce a new memory region listener hook log_clear() to allow the
> listeners to hook onto the points where the dirty bitmap is cleared by
> the bitmap users.
>
> Previously log_sync() contains two operations:
>
> - dirty bitmap collection, and,
> - dirty bitmap clear on remote site.
>
> Let's take KVM as example - log_sync() for KVM will first copy the
> kernel dirty bitmap to userspace, and at the same time we'll clear the
> dirty bitmap there along with re-protecting all the guest pages again.
>
> We add this new log_clear() interface only to split the old log_sync()
> into two separated procedures:
>
> - use log_sync() to collect the collection only, and,
> - use log_clear() to clear the remote dirty bitmap.
>
> With the new interface, the memory listener users will still be able
> to decide how to implement the log synchronization procedure, e.g.,
> they can still only provide log_sync() method only and put all the two
> procedures within log_sync() (that's how the old KVM works before
> KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2 is introduced). However with this
> new interface the memory listener users will start to have a chance to
> postpone the log clear operation explicitly if the module supports.
> That can really benefit users like KVM at least for host kernels that
> support KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2.
>
> There are three places that can clear dirty bits in any one of the
> dirty bitmap in the ram_list.dirty_memory[3] array:
>
> cpu_physical_memory_snapshot_and_clear_dirty
> cpu_physical_memory_test_and_clear_dirty
> cpu_physical_memory_sync_dirty_bitmap
>
> Currently we hook directly into each of the functions to notify about
> the log_clear().
>
> Signed-off-by: Peter Xu <address@hidden>
> ---
> exec.c | 12 ++++++++++
> include/exec/memory.h | 17 ++++++++++++++
> include/exec/ram_addr.h | 3 +++
> memory.c | 51 +++++++++++++++++++++++++++++++++++++++++
> 4 files changed, 83 insertions(+)
>
> diff --git a/exec.c b/exec.c
> index 2615b4cfed..ab595e1e4b 100644
> --- a/exec.c
> +++ b/exec.c
> @@ -1355,6 +1355,8 @@ bool
> cpu_physical_memory_test_and_clear_dirty(ram_addr_t start,
> DirtyMemoryBlocks *blocks;
> unsigned long end, page;
> bool dirty = false;
> + RAMBlock *ramblock;
> + uint64_t mr_offset, mr_size;
>
> if (length == 0) {
> return false;
> @@ -1366,6 +1368,10 @@ bool
> cpu_physical_memory_test_and_clear_dirty(ram_addr_t start,
> rcu_read_lock();
>
> blocks = atomic_rcu_read(&ram_list.dirty_memory[client]);
> + ramblock = qemu_get_ram_block(start);
> + /* Range sanity check on the ramblock */
> + assert(start >= ramblock->offset &&
> + start + length <= ramblock->offset + ramblock->used_length);
>
> while (page < end) {
> unsigned long idx = page / DIRTY_MEMORY_BLOCK_SIZE;
> @@ -1377,6 +1383,10 @@ bool
> cpu_physical_memory_test_and_clear_dirty(ram_addr_t start,
> page += num;
> }
>
> + mr_offset = (ram_addr_t)(page << TARGET_PAGE_BITS) - ramblock->offset;
> + mr_size = (end - page) << TARGET_PAGE_BITS;
> + memory_region_clear_dirty_bitmap(ramblock->mr, mr_offset, mr_size);
> +
> rcu_read_unlock();
>
> if (dirty && tcg_enabled()) {
> @@ -1432,6 +1442,8 @@ DirtyBitmapSnapshot
> *cpu_physical_memory_snapshot_and_clear_dirty
> tlb_reset_dirty_range_all(start, length);
> }
>
> + memory_region_clear_dirty_bitmap(mr, addr, length);
> +
> return snap;
> }
>
> diff --git a/include/exec/memory.h b/include/exec/memory.h
> index f29300c54d..d752b2a758 100644
> --- a/include/exec/memory.h
> +++ b/include/exec/memory.h
> @@ -416,6 +416,7 @@ struct MemoryListener {
> void (*log_stop)(MemoryListener *listener, MemoryRegionSection *section,
> int old, int new);
> void (*log_sync)(MemoryListener *listener, MemoryRegionSection *section);
> + void (*log_clear)(MemoryListener *listener, MemoryRegionSection
> *section);
> void (*log_global_start)(MemoryListener *listener);
> void (*log_global_stop)(MemoryListener *listener);
> void (*eventfd_add)(MemoryListener *listener, MemoryRegionSection
> *section,
> @@ -1269,6 +1270,22 @@ void memory_region_set_log(MemoryRegion *mr, bool log,
> unsigned client);
> void memory_region_set_dirty(MemoryRegion *mr, hwaddr addr,
> hwaddr size);
>
> +/**
> + * memory_region_clear_dirty_bitmap - clear dirty bitmap for memory range
> + *
> + * This function is called when the caller wants to clear the remote
> + * dirty bitmap of a memory range within the memory region. This can
> + * be used by e.g. KVM to manually clear dirty log when
> + * KVM_CAP_MANUAL_DIRTY_LOG_PROTECT is declared support by the host
> + * kernel.
> + *
> + * @mr: the memory region to clear the dirty log upon
> + * @start: start address offset within the memory region
> + * @len: length of the memory region to clear dirty bitmap
> + */
> +void memory_region_clear_dirty_bitmap(MemoryRegion *mr, hwaddr start,
> + hwaddr len);
> +
> /**
> * memory_region_snapshot_and_clear_dirty: Get a snapshot of the dirty
> * bitmap and clear it.
> diff --git a/include/exec/ram_addr.h b/include/exec/ram_addr.h
> index f8ee011d3c..f8930914cd 100644
> --- a/include/exec/ram_addr.h
> +++ b/include/exec/ram_addr.h
> @@ -461,6 +461,9 @@ uint64_t cpu_physical_memory_sync_dirty_bitmap(RAMBlock
> *rb,
> idx++;
> }
> }
> +
> + /* TODO: split the huge bitmap into smaller chunks */
> + memory_region_clear_dirty_bitmap(rb->mr, start, length);
> } else {
> ram_addr_t offset = rb->offset;
>
> diff --git a/memory.c b/memory.c
> index 84bba7b65c..a051025dd1 100644
> --- a/memory.c
> +++ b/memory.c
> @@ -2064,6 +2064,57 @@ static void
> memory_region_sync_dirty_bitmap(MemoryRegion *mr)
> }
> }
>
> +void memory_region_clear_dirty_bitmap(MemoryRegion *mr, hwaddr start,
> + hwaddr len)
> +{
> + MemoryRegionSection mrs;
> + MemoryListener *listener;
> + AddressSpace *as;
> + FlatView *view;
> + FlatRange *fr;
> + hwaddr sec_start, sec_end, sec_size;
> +
> + QTAILQ_FOREACH(listener, &memory_listeners, link) {
> + if (!listener->log_clear) {
> + continue;
> + }
> + as = listener->address_space;
> + view = address_space_get_flatview(as);
> + FOR_EACH_FLAT_RANGE(fr, view) {
> + if (!fr->dirty_log_mask || fr->mr != mr) {
> + /*
> + * Clear dirty bitmap operation only applies to those
> + * regions whose dirty logging is at least enabled
> + */
> + continue;
> + }
> +
> + mrs = section_from_flat_range(fr, view);
> +
> + sec_start = MAX(mrs.offset_within_region, start);
> + sec_end = mrs.offset_within_region + int128_get64(mrs.size);
> + sec_end = MIN(sec_end, start + len);
> +
> + if (sec_start >= sec_end) {
> + /*
> + * If this memory region section has no intersection
> + * with the requested range, skip.
> + */
> + continue;
> + }
> +
> + /* Valid case; shrink the section if needed */
> + mrs.offset_within_address_space +=
> + sec_start - mrs.offset_within_region;
> + mrs.offset_within_region = sec_start;
> + sec_size = sec_end - sec_start;
> + mrs.size = int128_make64(sec_size);
> + listener->log_clear(listener, &mrs);
> + }
> + flatview_unref(view);
> + }
> +}
> +
> DirtyBitmapSnapshot *memory_region_snapshot_and_clear_dirty(MemoryRegion *mr,
> hwaddr addr,
> hwaddr size,
I think that's ok (although some of the size juggling I only think I've
got).
Reviewed-by: Dr. David Alan Gilbert <address@hidden>
> --
> 2.17.1
>
--
Dr. David Alan Gilbert / address@hidden / Manchester, UK
- [Qemu-devel] [PATCH v3 02/12] migration: No need to take rcu during sync_dirty_bitmap, (continued)
- [Qemu-devel] [PATCH v3 02/12] migration: No need to take rcu during sync_dirty_bitmap, Peter Xu, 2019/05/30
- [Qemu-devel] [PATCH v3 03/12] memory: Remove memory_region_get_dirty(), Peter Xu, 2019/05/30
- [Qemu-devel] [PATCH v3 04/12] memory: Don't set migration bitmap when without migration, Peter Xu, 2019/05/30
- [Qemu-devel] [PATCH v3 05/12] bitmap: Add bitmap_copy_with_{src|dst}_offset(), Peter Xu, 2019/05/30
- [Qemu-devel] [PATCH v3 06/12] memory: Pass mr into snapshot_and_clear_dirty, Peter Xu, 2019/05/30
- [Qemu-devel] [PATCH v3 07/12] memory: Introduce memory listener hook log_clear(), Peter Xu, 2019/05/30
- Re: [Qemu-devel] [PATCH v3 07/12] memory: Introduce memory listener hook log_clear(),
Dr. David Alan Gilbert <=
- [Qemu-devel] [PATCH v3 08/12] kvm: Update comments for sync_dirty_bitmap, Peter Xu, 2019/05/30
- [Qemu-devel] [PATCH v3 09/12] kvm: Persistent per kvmslot dirty bitmap, Peter Xu, 2019/05/30
- [Qemu-devel] [PATCH v3 10/12] kvm: Introduce slots lock for memory listener, Peter Xu, 2019/05/30
- [Qemu-devel] [PATCH v3 11/12] kvm: Support KVM_CLEAR_DIRTY_LOG, Peter Xu, 2019/05/30
- [Qemu-devel] [PATCH v3 12/12] migration: Split log_clear() into smaller chunks, Peter Xu, 2019/05/30