[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v13 09/12] Add rx-softmmu
From: |
Philippe Mathieu-Daudé |
Subject: |
Re: [Qemu-devel] [PATCH v13 09/12] Add rx-softmmu |
Date: |
Thu, 16 May 2019 12:48:34 +0200 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:60.0) Gecko/20100101 Thunderbird/60.6.1 |
On 5/16/19 7:52 AM, Yoshinori Sato wrote:
> Signed-off-by: Yoshinori Sato <address@hidden>
> Tested-by: Philippe Mathieu-Daudé <address@hidden>
>
> Using only CONFIG_RX=y:
Richard: Can you drop the previous "Using only CONFIG_RX=y" line?
It was related to an older series. Thanks!
> Reviewed-by: Philippe Mathieu-Daudé <address@hidden>
>
> Signed-off-by: Yoshinori Sato <address@hidden>
One S-o-b is enough ;) I'm not asking you to respin this series however!
> ---
> configure | 8 ++++++++
> default-configs/rx-softmmu.mak | 3 +++
> include/sysemu/arch_init.h | 1 +
> arch_init.c | 2 ++
> hw/Kconfig | 1 +
> 5 files changed, 15 insertions(+)
> create mode 100644 default-configs/rx-softmmu.mak
>
> diff --git a/configure b/configure
> index 8999698bc2..28782762dd 100755
> --- a/configure
> +++ b/configure
> @@ -7547,6 +7547,11 @@ case "$target_name" in
> gdb_xml_files="riscv-64bit-cpu.xml riscv-64bit-fpu.xml
> riscv-64bit-csr.xml"
> target_compiler=$cross_cc_riscv64
> ;;
> + rx)
> + TARGET_ARCH=rx
> + bflt="yes"
> + target_compiler=$cross_cc_rx
> + ;;
> sh4|sh4eb)
> TARGET_ARCH=sh4
> bflt="yes"
> @@ -7767,6 +7772,9 @@ for i in $ARCH $TARGET_BASE_ARCH ; do
> riscv*)
> disas_config "RISCV"
> ;;
> + rx)
> + disas_config "RX"
> + ;;
> s390*)
> disas_config "S390"
> ;;
> diff --git a/default-configs/rx-softmmu.mak b/default-configs/rx-softmmu.mak
> new file mode 100644
> index 0000000000..a3eecefb11
> --- /dev/null
> +++ b/default-configs/rx-softmmu.mak
> @@ -0,0 +1,3 @@
> +# Default configuration for rx-softmmu
> +
> +CONFIG_RX_VIRT=y
> diff --git a/include/sysemu/arch_init.h b/include/sysemu/arch_init.h
> index 10cbafe970..3f4f844f7b 100644
> --- a/include/sysemu/arch_init.h
> +++ b/include/sysemu/arch_init.h
> @@ -25,6 +25,7 @@ enum {
> QEMU_ARCH_NIOS2 = (1 << 17),
> QEMU_ARCH_HPPA = (1 << 18),
> QEMU_ARCH_RISCV = (1 << 19),
> + QEMU_ARCH_RX = (1 << 20),
> };
>
> extern const uint32_t arch_type;
> diff --git a/arch_init.c b/arch_init.c
> index f4f3f610c8..cc25ddd7ca 100644
> --- a/arch_init.c
> +++ b/arch_init.c
> @@ -74,6 +74,8 @@ int graphic_depth = 32;
> #define QEMU_ARCH QEMU_ARCH_PPC
> #elif defined(TARGET_RISCV)
> #define QEMU_ARCH QEMU_ARCH_RISCV
> +#elif defined(TARGET_RX)
> +#define QEMU_ARCH QEMU_ARCH_RX
> #elif defined(TARGET_S390X)
> #define QEMU_ARCH QEMU_ARCH_S390X
> #elif defined(TARGET_SH4)
> diff --git a/hw/Kconfig b/hw/Kconfig
> index 88b9f15007..63a071092e 100644
> --- a/hw/Kconfig
> +++ b/hw/Kconfig
> @@ -53,6 +53,7 @@ source nios2/Kconfig
> source openrisc/Kconfig
> source ppc/Kconfig
> source riscv/Kconfig
> +source rx/Kconfig
> source s390x/Kconfig
> source sh4/Kconfig
> source sparc/Kconfig
>
- [Qemu-devel] [PATCH v13 00/12] Add RX archtecture support, Yoshinori Sato, 2019/05/16
- [Qemu-devel] [PATCH v13 09/12] Add rx-softmmu, Yoshinori Sato, 2019/05/16
- Re: [Qemu-devel] [PATCH v13 09/12] Add rx-softmmu,
Philippe Mathieu-Daudé <=
- [Qemu-devel] [PATCH v13 05/12] hw/intc: RX62N interrupt controller (ICUa), Yoshinori Sato, 2019/05/16
- [Qemu-devel] [PATCH v13 10/12] hw/registerfields.h: Add 8bit and 16bit register macros., Yoshinori Sato, 2019/05/16
- [Qemu-devel] [PATCH v13 08/12] hw/rx: RX Target hardware definition, Yoshinori Sato, 2019/05/16
- [Qemu-devel] [PATCH v13 11/12] qemu/bitops.h: Add extract8 and extract16, Yoshinori Sato, 2019/05/16
- [Qemu-devel] [PATCH v13 02/12] target/rx: TCG helper, Yoshinori Sato, 2019/05/16
- [Qemu-devel] [PATCH v13 03/12] target/rx: CPU definition, Yoshinori Sato, 2019/05/16