[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v10 08/13] hw/char: RX62N serial communication i
From: |
Yoshinori Sato |
Subject: |
Re: [Qemu-devel] [PATCH v10 08/13] hw/char: RX62N serial communication interface (SCI) |
Date: |
Mon, 13 May 2019 14:53:38 +0900 |
User-agent: |
Wanderlust/2.15.9 (Almost Unreal) SEMI-EPG/1.14.7 (Harue) FLIM/1.14.9 (Gojō) APEL/10.8 EasyPG/1.0.0 Emacs/25.1 (x86_64-pc-linux-gnu) MULE/6.0 (HANACHIRUSATO) |
On Thu, 09 May 2019 01:16:58 +0900,
Philippe Mathieu-Daudé wrote:
>
> On 5/8/19 4:56 PM, Yoshinori Sato wrote:
> > This module supported only non FIFO type.
> > Hardware manual.
> > https://www.renesas.com/us/en/doc/products/mpumcu/doc/rx_family/r01uh0033ej0140_rx62n.pdf
> >
> > Signed-off-by: Yoshinori Sato <address@hidden>
> > ---
> > include/hw/char/renesas_sci.h | 45 ++++++
> > hw/char/renesas_sci.c | 340
> > ++++++++++++++++++++++++++++++++++++++++++
> > hw/char/Kconfig | 3 +
> > hw/char/Makefile.objs | 2 +-
> > 4 files changed, 389 insertions(+), 1 deletion(-)
> > create mode 100644 include/hw/char/renesas_sci.h
> > create mode 100644 hw/char/renesas_sci.c
> >
> > diff --git a/include/hw/char/renesas_sci.h b/include/hw/char/renesas_sci.h
> > new file mode 100644
> > index 0000000000..50d1336944
> > --- /dev/null
> > +++ b/include/hw/char/renesas_sci.h
> > @@ -0,0 +1,45 @@
> > +/*
> > + * Renesas Serial Communication Interface
> > + *
> > + * Copyright (c) 2018 Yoshinori Sato
> > + *
> > + * This code is licensed under the GPL version 2 or later.
> > + *
> > + */
> > +
> > +#include "chardev/char-fe.h"
> > +#include "qemu/timer.h"
> > +#include "hw/sysbus.h"
> > +
> > +#define TYPE_RENESAS_SCI "renesas-sci"
> > +#define RSCI(obj) OBJECT_CHECK(RSCIState, (obj), TYPE_RENESAS_SCI)
> > +
> > +enum {
> > + ERI = 0,
> > + RXI = 1,
> > + TXI = 2,
> > + TEI = 3,
> > + SCI_NR_IRQ = 4,
> > +};
> > +
> > +typedef struct {
> > + SysBusDevice parent_obj;
> > + MemoryRegion memory;
> > +
> > + uint8_t smr;
> > + uint8_t brr;
> > + uint8_t scr;
> > + uint8_t tdr;
> > + uint8_t ssr;
> > + uint8_t rdr;
> > + uint8_t scmr;
> > + uint8_t semr;
> > +
> > + uint8_t read_ssr;
> > + int64_t trtime;
> > + int64_t rx_next;
> > + QEMUTimer *timer;
> > + CharBackend chr;
> > + uint64_t input_freq;
> > + qemu_irq irq[SCI_NR_IRQ];
> > +} RSCIState;
> > diff --git a/hw/char/renesas_sci.c b/hw/char/renesas_sci.c
> > new file mode 100644
> > index 0000000000..2e7c3e460e
> > --- /dev/null
> > +++ b/hw/char/renesas_sci.c
> > @@ -0,0 +1,340 @@
> > +/*
> > + * Renesas Serial Communication Interface
> > + *
> > + * Datasheet: RX62N Group, RX621 Group User's Manual: Hardware
> > + * (Rev.1.40 R01UH0033EJ0140)
> > + *
> > + * Copyright (c) 2019 Yoshinori Sato
> > + *
> > + * This program is free software; you can redistribute it and/or modify it
> > + * under the terms and conditions of the GNU General Public License,
> > + * version 2 or later, as published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope it will be useful, but WITHOUT
> > + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> > + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
> > for
> > + * more details.
> > + *
> > + * You should have received a copy of the GNU General Public License along
> > with
> > + * this program. If not, see <http://www.gnu.org/licenses/>.
> > + */
> > +
> > +#include "qemu/osdep.h"
> > +#include "qemu/log.h"
> > +#include "qapi/error.h"
> > +#include "qemu-common.h"
> > +#include "cpu.h"
> > +#include "hw/hw.h"
> > +#include "hw/sysbus.h"
> > +#include "hw/registerfields.h"
> > +#include "hw/char/renesas_sci.h"
> > +#include "qemu/error-report.h"
> > +
> > +/* SCI register map */
> > +REG8(SMR, 0)
> > + FIELD(SMR, CKS, 0, 2)
> > + FIELD(SMR, MP, 2, 1)
> > + FIELD(SMR, STOP, 3, 1)
> > + FIELD(SMR, PM, 4, 1)
> > + FIELD(SMR, PE, 5, 1)
> > + FIELD(SMR, CHR, 6, 1)
> > + FIELD(SMR, CM, 7, 1)
> > +REG8(BRR, 1)
> > +REG8(SCR, 2)
> > + FIELD(SCR, CKE, 0, 2)
> > + FIELD(SCR, TEIE, 2, 1)
> > + FIELD(SCR, MPIE, 3, 1)
> > + FIELD(SCR, RE, 4, 1)
> > + FIELD(SCR, TE, 5, 1)
> > + FIELD(SCR, RIE, 6, 1)
> > + FIELD(SCR, TIE, 7, 1)
> > +REG8(TDR, 3)
> > +REG8(SSR, 4)
> > + FIELD(SSR, MPBT, 0, 1)
> > + FIELD(SSR, MPB, 1, 1)
> > + FIELD(SSR, TEND, 2, 1)
> > + FIELD(SSR, ERR, 3, 3)
> > + FIELD(SSR, PER, 3, 1)
> > + FIELD(SSR, FER, 4, 1)
> > + FIELD(SSR, ORER, 5, 1)
> > + FIELD(SSR, RDRF, 6, 1)
> > + FIELD(SSR, TDRE, 7, 1)
> > +REG8(RDR, 5)
> > +REG8(SCMR, 6)
> > + FIELD(SCMR, SMIF, 0, 1)
> > + FIELD(SCMR, SINV, 2, 1)
> > + FIELD(SCMR, SDIR, 3, 1)
> > + FIELD(SCMR, BCP2, 7, 1)
> > +REG8(SEMR, 7)
> > + FIELD(SEMR, ACS0, 0, 1)
> > + FIELD(SEMR, ABCS, 4, 1)
> > +
> > +static int can_receive(void *opaque)
> > +{
> > + RSCIState *sci = RSCI(opaque);
> > + if (sci->rx_next > qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL)) {
> > + return 0;
> > + } else {
> > + return FIELD_EX8(sci->scr, SCR, RE);
> > + }
> > +}
> > +
> > +static void receive(void *opaque, const uint8_t *buf, int size)
> > +{
> > + RSCIState *sci = RSCI(opaque);
> > + sci->rx_next = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + sci->trtime;
> > + if (FIELD_EX8(sci->ssr, SSR, RDRF) || size > 1) {
> > + sci->ssr = FIELD_DP8(sci->ssr, SSR, ORER, 1);
> > + if (FIELD_EX8(sci->scr, SCR, RIE)) {
> > + qemu_set_irq(sci->irq[ERI], 1);
> > + }
> > + } else {
> > + sci->rdr = buf[0];
> > + sci->ssr = FIELD_DP8(sci->ssr, SSR, RDRF, 1);
> > + if (FIELD_EX8(sci->scr, SCR, RIE)) {
> > + qemu_irq_pulse(sci->irq[RXI]);
> > + }
> > + }
> > +}
> > +
> > +static void send_byte(RSCIState *sci)
> > +{
> > + if (qemu_chr_fe_backend_connected(&sci->chr)) {
> > + qemu_chr_fe_write_all(&sci->chr, &sci->tdr, 1);
> > + }
> > + timer_mod(sci->timer,
> > + qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + sci->trtime);
> > + sci->ssr = FIELD_DP8(sci->ssr, SSR, TEND, 0);
> > + sci->ssr = FIELD_DP8(sci->ssr, SSR, TDRE, 1);
> > + qemu_set_irq(sci->irq[TEI], 0);
> > + if (FIELD_EX8(sci->scr, SCR, TIE)) {
> > + qemu_irq_pulse(sci->irq[TXI]);
> > + }
> > +}
> > +
> > +static void txend(void *opaque)
> > +{
> > + RSCIState *sci = RSCI(opaque);
> > + if (!FIELD_EX8(sci->ssr, SSR, TDRE)) {
> > + send_byte(sci);
> > + } else {
> > + sci->ssr = FIELD_DP8(sci->ssr, SSR, TEND, 1);
> > + if (FIELD_EX8(sci->scr, SCR, TEIE)) {
> > + qemu_set_irq(sci->irq[TEI], 1);
> > + }
> > + }
> > +}
> > +
> > +static void update_trtime(RSCIState *sci)
> > +{
> > + /* char per bits */
> > + sci->trtime = 8 - FIELD_EX8(sci->smr, SMR, CHR);
> > + sci->trtime += FIELD_EX8(sci->smr, SMR, PE);
> > + sci->trtime += FIELD_EX8(sci->smr, SMR, STOP) + 1;
> > + /* x bit transmit time (32 * divrate * brr) / base freq */
> > + sci->trtime *= 32 * sci->brr;
> > + sci->trtime *= 1 << (2 * FIELD_EX8(sci->smr, SMR, CKS));
> > + sci->trtime *= NANOSECONDS_PER_SECOND;
> > + sci->trtime /= sci->input_freq;
> > +}
> > +
> > +#define IS_TR_ENABLED(scr) \
> > + (FIELD_EX8(scr, SCR, TE) || FIELD_EX8(scr, SCR, RE))
> > +
> > +static void sci_write(void *opaque, hwaddr addr, uint64_t val, unsigned
> > size)
> > +{
> > + hwaddr offset = addr & 0x07;
> > + RSCIState *sci = RSCI(opaque);
> > +
> > + switch (offset) {
> > + case A_SMR:
> > + if (!IS_TR_ENABLED(sci->scr)) {
> > + sci->smr = val;
> > + update_trtime(sci);
> > + }
> > + break;
> > + case A_BRR:
> > + if (!IS_TR_ENABLED(sci->scr)) {
> > + sci->brr = val;
> > + update_trtime(sci);
> > + }
> > + break;
> > + case A_SCR:
> > + sci->scr = val;
> > + if (FIELD_EX8(sci->scr, SCR, TE)) {
> > + sci->ssr = FIELD_DP8(sci->ssr, SSR, TDRE, 1);
> > + sci->ssr = FIELD_DP8(sci->ssr, SSR, TEND, 1);
> > + if (FIELD_EX8(sci->scr, SCR, TIE)) {
> > + qemu_irq_pulse(sci->irq[TXI]);
> > + }
> > + }
> > + if (!FIELD_EX8(sci->scr, SCR, TEIE)) {
> > + qemu_set_irq(sci->irq[TEI], 0);
> > + }
> > + if (!FIELD_EX8(sci->scr, SCR, RIE)) {
> > + qemu_set_irq(sci->irq[ERI], 0);
> > + }
> > + break;
> > + case A_TDR:
> > + sci->tdr = val;
> > + if (FIELD_EX8(sci->ssr, SSR, TEND)) {
> > + send_byte(sci);
> > + } else {
> > + sci->ssr = FIELD_DP8(sci->ssr, SSR, TDRE, 0);
> > + }
> > + break;
> > + case A_SSR:
> > + sci->ssr = FIELD_DP8(sci->ssr, SSR, MPBT,
> > + FIELD_EX8(val, SSR, MPBT));
> > + sci->ssr = FIELD_DP8(sci->ssr, SSR, ERR,
> > + FIELD_EX8(val, SSR, ERR) & 0x07);
> > + if (FIELD_EX8(sci->read_ssr, SSR, ERR) &&
> > + FIELD_EX8(sci->ssr, SSR, ERR) == 0) {
> > + qemu_set_irq(sci->irq[ERI], 0);
> > + }
> > + break;
> > + case A_RDR:
> > + qemu_log_mask(LOG_GUEST_ERROR, "reneas_sci: RDR is read only.\n");
> > + break;
> > + case A_SCMR:
> > + sci->scmr = val; break;
> > + case A_SEMR: /* SEMR */
> > + sci->semr = val; break;
> > + default:
> > + qemu_log_mask(LOG_UNIMP,
> > + "renesas_sci: Register %08lx not implemented\n",
> > offset);
>
> On 32bit host I get:
>
> In file included from qemu/hw/char/renesas_sci.c:23:0:
> qemu/hw/char/renesas_sci.c: In function 'sci_write':
> qemu/hw/char/renesas_sci.c:205:23: error: format '%lx' expects argument
> of type 'long unsigned int', but argument 2 has type 'hwaddr {aka long
> long unsigned int}' [-Werror=format=]
> "renesas_sci: Register %08lx not implemented\n",
> offset);
> ^
> qemu/include/qemu/log.h:85:22: note: in definition of macro 'qemu_log_mask'
> qemu_log(FMT, ## __VA_ARGS__); \
> ^
> qemu/hw/char/renesas_sci.c: In function 'sci_read':
> qemu/hw/char/renesas_sci.c:235:23: error: format '%lx' expects argument
> of type 'long unsigned int', but argument 2 has type 'hwaddr {aka long
> long unsigned int}' [-Werror=format=]
> "renesas_sci: Register %08lx not implemented.\n",
> offset);
> ^
> qemu/include/qemu/log.h:85:22: note: in definition of macro 'qemu_log_mask'
> qemu_log(FMT, ## __VA_ARGS__); \
> ^
> cc1: all warnings being treated as errors
>
> This snippet fixes the error:
>
> -- >8 --
> diff --git a/hw/char/renesas_sci.c b/hw/char/renesas_sci.c
> @@ -202,7 +202,8 @@ static void sci_write(void *opaque, hwaddr addr,
> uint64_t val, unsigned size)
> sci->semr = val; break;
> default:
> qemu_log_mask(LOG_UNIMP,
> - "renesas_sci: Register %08lx not implemented\n",
> offset);
> + "renesas_sci: Register %08" HWADDR_PRIx
> + " not implemented\n", offset);
> }
> }
>
> @@ -232,7 +233,8 @@ static uint64_t sci_read(void *opaque, hwaddr addr,
> unsigned size)
> return sci->semr;
> default:
> qemu_log_mask(LOG_UNIMP,
> - "renesas_sci: Register %08lx not implemented.\n",
> offset);
> + "renesas_sci: Register %08" HWADDR_PRIx
> + " not implemented\n", offset);
> }
> return -1;
> }
> ---
>
> > + }
> > +}
> > +
> > +static uint64_t sci_read(void *opaque, hwaddr addr, unsigned size)
> > +{
> > + hwaddr offset = addr & 0x07;
> > + RSCIState *sci = RSCI(opaque);
> > +
> > + switch (offset) {
> > + case A_SMR:
> > + return sci->smr;
> > + case A_BRR:
> > + return sci->brr;
> > + case A_SCR:
> > + return sci->scr;
> > + case A_TDR:
> > + return sci->tdr;
> > + case A_SSR:
> > + sci->read_ssr = sci->ssr;
> > + return sci->ssr;
> > + case A_RDR:
> > + sci->ssr = FIELD_DP8(sci->ssr, SSR, RDRF, 0);
> > + return sci->rdr;
> > + case A_SCMR:
> > + return sci->scmr;
> > + case A_SEMR:
> > + return sci->semr;
> > + default:
> > + qemu_log_mask(LOG_UNIMP,
> > + "renesas_sci: Register %08lx not implemented.\n",
> > offset);
> > + }
> > + return -1;
> > +}
> > +
> > +static const MemoryRegionOps sci_ops = {
> > + .write = sci_write,
> > + .read = sci_read,
> > + .endianness = DEVICE_NATIVE_ENDIAN,
> > + .impl = {
> > + .max_access_size = 1,
> > + },
> > +};
> > +
> > +static void rsci_reset(DeviceState *dev)
> > +{
> > + RSCIState *sci = RSCI(dev);
> > + sci->smr = sci->scr = 0x00;
> > + sci->brr = 0xff;
> > + sci->tdr = 0xff;
> > + sci->rdr = 0x00;
> > + sci->ssr = 0x84;
> > + sci->scmr = 0x00;
> > + sci->semr = 0x00;
> > + sci->rx_next = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL);
> > +}
> > +
> > +static void sci_event(void *opaque, int event)
> > +{
> > + RSCIState *sci = RSCI(opaque);
> > + if (event == CHR_EVENT_BREAK) {
> > + sci->ssr = FIELD_DP8(sci->ssr, SSR, FER, 1);
> > + if (FIELD_EX8(sci->scr, SCR, RIE)) {
> > + qemu_set_irq(sci->irq[ERI], 1);
> > + }
> > + }
> > +}
> > +
> > +static void rsci_realize(DeviceState *dev, Error **errp)
> > +{
> > + RSCIState *sci = RSCI(dev);
> > +
> > + if (sci->input_freq == 0) {
> > + qemu_log_mask(LOG_GUEST_ERROR,
> > + "renesas_sci: input-freq property must be set.");
> > + return;
> > + }
> > + qemu_chr_fe_set_handlers(&sci->chr, can_receive, receive,
> > + sci_event, NULL, sci, NULL, true);
> > +}
> > +
> > +static void rsci_init(Object *obj)
> > +{
> > + SysBusDevice *d = SYS_BUS_DEVICE(obj);
> > + RSCIState *sci = RSCI(obj);
> > + int i;
> > +
> > + memory_region_init_io(&sci->memory, OBJECT(sci), &sci_ops,
> > + sci, "renesas-sci", 0x8);
> > + sysbus_init_mmio(d, &sci->memory);
> > +
> > + for (i = 0; i < SCI_NR_IRQ; i++) {
> > + sysbus_init_irq(d, &sci->irq[i]);
> > + }
> > + sci->timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, txend, sci);
> > +}
> > +
> > +static const VMStateDescription vmstate_rcmt = {
> > + .name = "renesas-sci",
> > + .version_id = 1,
> > + .minimum_version_id = 1,
> > + .fields = (VMStateField[]) {
> > + VMSTATE_END_OF_LIST()
> > + }
> > +};
> > +
> > +static Property rsci_properties[] = {
> > + DEFINE_PROP_UINT64("input-freq", RSCIState, input_freq, 0),
> > + DEFINE_PROP_CHR("chardev", RSCIState, chr),
> > + DEFINE_PROP_END_OF_LIST(),
> > +};
> > +
> > +static void rsci_class_init(ObjectClass *klass, void *data)
> > +{
> > + DeviceClass *dc = DEVICE_CLASS(klass);
> > +
> > + dc->realize = rsci_realize;
> > + dc->props = rsci_properties;
> > + dc->vmsd = &vmstate_rcmt;
> > + dc->reset = rsci_reset;
> > +}
> > +
> > +static const TypeInfo rsci_info = {
> > + .name = TYPE_RENESAS_SCI,
> > + .parent = TYPE_SYS_BUS_DEVICE,
> > + .instance_size = sizeof(RSCIState),
> > + .instance_init = rsci_init,
> > + .class_init = rsci_class_init,
> > +};
> > +
> > +static void rsci_register_types(void)
> > +{
> > + type_register_static(&rsci_info);
> > +}
> > +
> > +type_init(rsci_register_types)
> > diff --git a/hw/char/Kconfig b/hw/char/Kconfig
> > index 6360c9fffa..10c24ca87f 100644
> > --- a/hw/char/Kconfig
> > +++ b/hw/char/Kconfig
> > @@ -40,3 +40,6 @@ config SCLPCONSOLE
> >
> > config TERMINAL3270
> > bool
> > +
> > +config RENESAS_SCI
> > + bool
>
> select SERIAL
It my mistake.
RX don't use SERIAL. So this line not needed.
> > diff --git a/hw/char/Makefile.objs b/hw/char/Makefile.objs
> > index cf086e7114..7567e89a49 100644
> > --- a/hw/char/Makefile.objs
> > +++ b/hw/char/Makefile.objs
> > @@ -15,7 +15,7 @@ common-obj-$(CONFIG_CADENCE) += cadence_uart.o
> > obj-$(CONFIG_EXYNOS4) += exynos4210_uart.o
> > obj-$(CONFIG_COLDFIRE) += mcf_uart.o
> > obj-$(CONFIG_OMAP) += omap_uart.o
> > -obj-$(CONFIG_SH4) += sh_serial.o
> > +obj-$(CONFIG_RENESAS_SCI) += renesas_sci.o
> > obj-$(CONFIG_PSERIES) += spapr_vty.o
> > obj-$(CONFIG_DIGIC) += digic-uart.o
> > obj-$(CONFIG_STM32F2XX_USART) += stm32f2xx_usart.o
> >
>
> Nice work!
>
> Tested-by: Philippe Mathieu-Daudé <address@hidden>
>
--
Yosinori Sato
- [Qemu-devel] [PATCH v10 05/13] target/rx: Miscellaneous files, (continued)
- [Qemu-devel] [PATCH v10 05/13] target/rx: Miscellaneous files, Yoshinori Sato, 2019/05/08
- [Qemu-devel] [PATCH v10 03/13] target/rx: CPU definition, Yoshinori Sato, 2019/05/08
- [Qemu-devel] [PATCH v10 06/13] hw/intc: RX62N interrupt controller (ICUa), Yoshinori Sato, 2019/05/08
- [Qemu-devel] [PATCH v10 08/13] hw/char: RX62N serial communication interface (SCI), Yoshinori Sato, 2019/05/08
- [Qemu-devel] [PATCH v10 12/13] hw/registerfields.h: Add 8bit and 16bit register macros., Yoshinori Sato, 2019/05/08
- [Qemu-devel] [PATCH v10 13/13] qemu/bitops.h: Add extract8 and extract16, Yoshinori Sato, 2019/05/08
- [Qemu-devel] [PATCH v10 09/13] hw/rx: RX Target hardware definition, Yoshinori Sato, 2019/05/08
- [Qemu-devel] [PATCH v10 07/13] hw/timer: RX62N internal timer modules, Yoshinori Sato, 2019/05/08
- [Qemu-devel] [PATCH v10 04/13] target/rx: RX disassembler, Yoshinori Sato, 2019/05/08