Re: [Qemu-devel] [PATCH v4] hw/virtio/virtio-mmio: Convert DPRINTF to trace and log

[LI, BO XUAN]

Hi Alex,

Sorry about that, I am still trying to get familiar with the patch
submission process. Since my patch has been changed from your last review,
I thought it would be safe to not include the r-b tag from last time. Will
take care next time!

Best regards,
Boxuan Li

On Sat, May 4, 2019 at 12:18 AM Alex Bennée <address@hidden> wrote:

>
> Boxuan Li <address@hidden> writes:
>
> > Use traces for debug message and qemu_log_mask for errors.
> >
> > Signed-off-by: Boxuan Li <address@hidden>
>
> You didn't add my r-b tags from last time. Anyway:
>
> Reviewed-by: Alex Bennée <address@hidden>
>
> > ---
> > v1:
> https://patchew.org/QEMU/address@hidden/
> > v2:
> https://patchew.org/QEMU/address@hidden/
> > v3:
> https://patchew.org/QEMU/address@hidden/
> > v4: Fix indentation and do not convert uint64_t to int
> > ---
> >  hw/virtio/trace-events  |  7 +++++++
> >  hw/virtio/virtio-mmio.c | 44
> +++++++++++++++++++++-----------------------
> >  2 files changed, 28 insertions(+), 23 deletions(-)
> >
> > diff --git a/hw/virtio/trace-events b/hw/virtio/trace-events
> > index 60c649c4bc..e28ba48da6 100644
> > --- a/hw/virtio/trace-events
> > +++ b/hw/virtio/trace-events
> > @@ -46,3 +46,10 @@ virtio_balloon_handle_output(const char *name,
> uint64_t gpa) "section name: %s g
> >  virtio_balloon_get_config(uint32_t num_pages, uint32_t actual)
> "num_pages: %d actual: %d"
> >  virtio_balloon_set_config(uint32_t actual, uint32_t oldactual) "actual:
> %d oldactual: %d"
> >  virtio_balloon_to_target(uint64_t target, uint32_t num_pages) "balloon
> target: 0x%"PRIx64" num_pages: %d"
> > +
> > +# virtio-mmio.c
> > +virtio_mmio_read(uint64_t offset) "virtio_mmio_read offset 0x%" PRIx64
> > +virtio_mmio_write_offset(uint64_t offset, uint64_t value)
> "virtio_mmio_write offset 0x%" PRIx64 " value 0x%" PRIx64
> > +virtio_mmio_guest_page(uint64_t size, int shift) "guest page size 0x%"
> PRIx64 " shift %d"
> > +virtio_mmio_queue_write(uint64_t value, int max_size) "mmio_queue write
> 0x%" PRIx64 " max %d"
> > +virtio_mmio_setting_irq(int level) "virtio_mmio setting IRQ %d"
> > diff --git a/hw/virtio/virtio-mmio.c b/hw/virtio/virtio-mmio.c
> > index 5807aa87fe..96c762f0bf 100644
> > --- a/hw/virtio/virtio-mmio.c
> > +++ b/hw/virtio/virtio-mmio.c
> > @@ -27,16 +27,8 @@
> >  #include "sysemu/kvm.h"
> >  #include "hw/virtio/virtio-bus.h"
> >  #include "qemu/error-report.h"
> > -
> > -/* #define DEBUG_VIRTIO_MMIO */
> > -
> > -#ifdef DEBUG_VIRTIO_MMIO
> > -
> > -#define DPRINTF(fmt, ...) \
> > -do { printf("virtio_mmio: " fmt , ## __VA_ARGS__); } while (0)
> > -#else
> > -#define DPRINTF(fmt, ...) do {} while (0)
> > -#endif
> > +#include "qemu/log.h"
> > +#include "trace.h"
> >
> >  /* QOM macros */
> >  /* virtio-mmio-bus */
> > @@ -107,7 +99,7 @@ static uint64_t virtio_mmio_read(void *opaque, hwaddr
> offset, unsigned size)
> >      VirtIOMMIOProxy *proxy = (VirtIOMMIOProxy *)opaque;
> >      VirtIODevice *vdev = virtio_bus_get_device(&proxy->bus);
> >
> > -    DPRINTF("virtio_mmio_read offset 0x%x\n", (int)offset);
> > +    trace_virtio_mmio_read(offset);
> >
> >      if (!vdev) {
> >          /* If no backend is present, we treat most registers as
> > @@ -144,7 +136,9 @@ static uint64_t virtio_mmio_read(void *opaque,
> hwaddr offset, unsigned size)
> >          }
> >      }
> >      if (size != 4) {
> > -        DPRINTF("wrong size access to register!\n");
> > +        qemu_log_mask(LOG_GUEST_ERROR,
> > +                      "%s: wrong size access to register!\n",
> > +                      __func__);
> >          return 0;
> >      }
> >      switch (offset) {
> > @@ -182,10 +176,12 @@ static uint64_t virtio_mmio_read(void *opaque,
> hwaddr offset, unsigned size)
> >      case VIRTIO_MMIO_QUEUE_ALIGN:
> >      case VIRTIO_MMIO_QUEUE_NOTIFY:
> >      case VIRTIO_MMIO_INTERRUPT_ACK:
> > -        DPRINTF("read of write-only register\n");
> > +        qemu_log_mask(LOG_GUEST_ERROR,
> > +                      "%s: read of write-only register\n",
> > +                      __func__);
> >          return 0;
> >      default:
> > -        DPRINTF("bad register offset\n");
> > +        qemu_log_mask(LOG_GUEST_ERROR, "%s: bad register offset\n",
> __func__);
> >          return 0;
> >      }
> >      return 0;
> > @@ -197,8 +193,7 @@ static void virtio_mmio_write(void *opaque, hwaddr
> offset, uint64_t value,
> >      VirtIOMMIOProxy *proxy = (VirtIOMMIOProxy *)opaque;
> >      VirtIODevice *vdev = virtio_bus_get_device(&proxy->bus);
> >
> > -    DPRINTF("virtio_mmio_write offset 0x%x value 0x%" PRIx64 "\n",
> > -            (int)offset, value);
> > +    trace_virtio_mmio_write_offset(offset, value);
> >
> >      if (!vdev) {
> >          /* If no backend is present, we just make all registers
> > @@ -226,7 +221,9 @@ static void virtio_mmio_write(void *opaque, hwaddr
> offset, uint64_t value,
> >          return;
> >      }
> >      if (size != 4) {
> > -        DPRINTF("wrong size access to register!\n");
> > +        qemu_log_mask(LOG_GUEST_ERROR,
> > +                      "%s: wrong size access to register!\n",
> > +                      __func__);
> >          return;
> >      }
> >      switch (offset) {
> > @@ -246,8 +243,7 @@ static void virtio_mmio_write(void *opaque, hwaddr
> offset, uint64_t value,
> >          if (proxy->guest_page_shift > 31) {
> >              proxy->guest_page_shift = 0;
> >          }
> > -        DPRINTF("guest page size %" PRIx64 " shift %d\n", value,
> > -                proxy->guest_page_shift);
> > +        trace_virtio_mmio_guest_page(value, proxy->guest_page_shift);
> >          break;
> >      case VIRTIO_MMIO_QUEUE_SEL:
> >          if (value < VIRTIO_QUEUE_MAX) {
> > @@ -255,7 +251,7 @@ static void virtio_mmio_write(void *opaque, hwaddr
> offset, uint64_t value,
> >          }
> >          break;
> >      case VIRTIO_MMIO_QUEUE_NUM:
> > -        DPRINTF("mmio_queue write %d max %d\n", (int)value,
> VIRTQUEUE_MAX_SIZE);
> > +        trace_virtio_mmio_queue_write(value, VIRTQUEUE_MAX_SIZE);
> >          virtio_queue_set_num(vdev, vdev->queue_sel, value);
> >          /* Note: only call this function for legacy devices */
> >          virtio_queue_update_rings(vdev, vdev->queue_sel);
> > @@ -303,11 +299,13 @@ static void virtio_mmio_write(void *opaque, hwaddr
> offset, uint64_t value,
> >      case VIRTIO_MMIO_DEVICE_FEATURES:
> >      case VIRTIO_MMIO_QUEUE_NUM_MAX:
> >      case VIRTIO_MMIO_INTERRUPT_STATUS:
> > -        DPRINTF("write to readonly register\n");
> > +        qemu_log_mask(LOG_GUEST_ERROR,
> > +                      "%s: write to readonly register\n",
> > +                      __func__);
> >          break;
> >
> >      default:
> > -        DPRINTF("bad register offset\n");
> > +        qemu_log_mask(LOG_GUEST_ERROR, "%s: bad register offset\n",
> __func__);
> >      }
> >  }
> >
> > @@ -327,7 +325,7 @@ static void virtio_mmio_update_irq(DeviceState
> *opaque, uint16_t vector)
> >          return;
> >      }
> >      level = (atomic_read(&vdev->isr) != 0);
> > -    DPRINTF("virtio_mmio setting IRQ %d\n", level);
> > +    trace_virtio_mmio_setting_irq(level);
> >      qemu_set_irq(proxy->irq, level);
> >  }
>
>
> --
> Alex Bennée
>