qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH 3/8] i386/kvm: document existing Hyper-V enlightenme


From: Vitaly Kuznetsov
Subject: [Qemu-devel] [PATCH 3/8] i386/kvm: document existing Hyper-V enlightenments
Date: Fri, 29 Mar 2019 15:18:27 +0100

Currently, there is no doc describing hv-* CPU flags, people are
encouraged to get the information from Microsoft Hyper-V Top Level
Functional specification (TLFS). There is, however, a bit of QEMU
specifics.

Signed-off-by: Vitaly Kuznetsov <address@hidden>
---
 docs/hyperv.txt | 180 ++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 180 insertions(+)
 create mode 100644 docs/hyperv.txt

diff --git a/docs/hyperv.txt b/docs/hyperv.txt
new file mode 100644
index 0000000000..397f2517b8
--- /dev/null
+++ b/docs/hyperv.txt
@@ -0,0 +1,180 @@
+Hyper-V Enlightenments
+======================
+
+
+1. Description
+===============
+In some cases when implementing a hardware interface in software is slow, KVM
+implements its own paravirtualized interfaces. This works well for Linux as
+guest support for such features is added simultaneously with the feature 
itself.
+It may, however, be hard-to-impossible to add support for these interfaces to
+proprietary OSes, namely, Microsoft Windows.
+
+KVM on x86 implements Hyper-V Enlightenments for Windows guests. These features
+make Windows and Hyper-V guests think they're running on top of a Hyper-V
+compatible hypervisor and use Hyper-V specific features.
+
+
+2. Setup
+=========
+No Hyper-V enlightenments are enabled by default by either KVM or QEMU. In
+QEMU, individual enlightenments can be enabled through CPU flags, e.g:
+
+  qemu-system-x86_64 --enable-kvm --cpu host,hv_relaxed,hv_vpindex,hv_time, ...
+
+Sometimes there are dependencies between enlightenments, QEMU is supposed to
+check that the supplied configuration is sane.
+
+When any set of the Hyper-V enlightenments is enabled, QEMU changes hypervisor
+identification (CPUID 0x40000000..0x4000000A) to Hyper-V. KVM identification
+and features are kept in leaves 0x40000100..0x40000101.
+
+
+3. Existing enlightenments
+===========================
+
+3.1. hv-relaxed
+================
+This feature tells guest OS to disable watchdog timeouts as it is running on a
+hypervisor. It is known that some Windows versions will do this even when they
+see 'hypervisor' CPU flag.
+
+3.2. hv-vapic
+==============
+Provides so-called VP Assist page MSR to guest allowing it to work with APIC
+more efficiently. In particular, this enlightenment allows paravirtualized
+(exit-less) EOI processing.
+
+3.3. hv-spinlocks=xxx
+======================
+Enables paravirtualized spinlocks. The parameter indicates how many times
+spinlock acquisition should be attempted before indicating the situation to the
+hypervisor. A special value 0xffffffff indicates "never to retry".
+
+3.4. hv-vpindex
+================
+Provides HV_X64_MSR_VP_INDEX (0x40000002) MSR to the guest which has Virtual
+processor index information. This enlightenment makes sense in conjunction with
+hv-synic, hv-stimer and other enlightenments which require the guest to know 
its
+Virtual Processor indices (e.g. when VP index needs to be passed in a
+hypercall).
+
+3.5. hv-runtime
+================
+Provides HV_X64_MSR_VP_RUNTIME (0x40000010) MSR to the guest. The MSR keeps the
+virtual processor run time in 100ns units. This gives guest operating system an
+idea of how much time was 'stolen' from it (when the virtual CPU was preempted
+to perform some other work).
+
+3.6. hv-crash
+==============
+Provides HV_X64_MSR_CRASH_P0..HV_X64_MSR_CRASH_P5 (0x40000100..0x40000105) and
+HV_X64_MSR_CRASH_CTL (0x40000105) MSRs to the guest. These MSRs are written to
+by the guest when it crashes, HV_X64_MSR_CRASH_P0..HV_X64_MSR_CRASH_P5 MSRs
+contain additional crash information. This information is outputted in QEMU log
+and through QAPI.
+Note: unlike under genuine Hyper-V, write to HV_X64_MSR_CRASH_CTL causes guest
+to shutdown. This effectively blocks crash dump generation by Windows.
+
+3.7. hv-time
+=============
+Enables two Hyper-V-specific clocksources available to the guest: MSR-based
+Hyper-V clocksource (HV_X64_MSR_TIME_REF_COUNT, 0x40000020) and Reference TSC
+page (enabled via MSR HV_X64_MSR_REFERENCE_TSC, 0x40000021). Both clocksources
+are per-guest, Reference TSC page clocksource allows for exit-less time stamp
+readings. Using this enlightenment leads to significant speedup of all 
timestamp
+related operations.
+
+3.8. hv-synic
+==============
+Enables Hyper-V Synthetic interrupt controller - an extension of a local APIC.
+When enabled, this enlightenment provides additional communication facilities
+to the guest: SynIC messages and Events. This is a pre-requisite for
+implementing VMBus devices (not yet in QEMU). Additionally, this enlightenment
+is needed to enable Hyper-V synthetic timers. SynIC is controlled through MSRs
+HV_X64_MSR_SCONTROL..HV_X64_MSR_EOM (0x40000080..0x40000084) and
+HV_X64_MSR_SINT0..HV_X64_MSR_SINT15 (0x40000090..0x4000009F)
+
+Requires: hv-vpindex
+
+3.9. hv-stimer
+===============
+Enables Hyper-V synthetic timers. There are four synthetic timers per virtual
+CPU controlled through HV_X64_MSR_STIMER0_CONFIG..HV_X64_MSR_STIMER3_COUNT
+(0x400000B0..0x400000B7) MSRs. These timers can work either in single-shot or
+periodic mode. It is known that certain Windows versions revert to using RTC
+extensively when this enlightenment is not provided; this leads to significant
+CPU consumption, even when virtual CPU is idle.
+
+Requires: hv-vpindex, hv-synic, hv-time
+
+3.10. hv-tlbflush
+==================
+Enables paravirtualized TLB shoot-down mechanism. On x86 architecture, remote
+TLB flush procedure requires sending IPIs and waiting for other CPUs to perform
+local TLB flush. In virtualized environment some virtual CPUs may not even be
+scheduled at the time of the call and may not require flushing (or, flushing
+may be postponed until the virtual CPU is scheduled). hv-tlbflush enlightenment
+implements TLB shoot-down through hypervisor enabling the optimization.
+
+Requires: hv-vpindex
+
+3.11. hv-ipi
+=============
+Enables paravirtualized IPI send mechanism. HvCallSendSyntheticClusterIpi
+hypercall may target more than 64 virtual CPUs simultaneously, doing the same
+through APIC requires more than one access (and thus exit to the hypervisor).
+
+Requires: hv-vpindex
+
+3.12. hv-vendor-id=xxx
+=======================
+This changes Hyper-V identification in CPUID 0x40000000.EBX-EDX from the 
default
+"Microsoft Hv". The parameter should be no longer than 12 characters. According
+to the specification, guests shouldn't use this information and it is unknown
+if there is a Windows version which acts differently.
+Note: hv-vendor-id is not an enlightenment and thus doesn't enable Hyper-V
+identification when specified without some other enlightenment.
+
+3.13. hv-reset
+===============
+Provides HV_X64_MSR_RESET (0x40000003) MSR to the guest allowing it to reset
+itself by writing to it. Even when this MSR is enabled, it is not a recommended
+way for Windows to perform system reboot and thus it may not be used.
+
+3.14. hv-frequencies
+============================================
+Provides HV_X64_MSR_TSC_FREQUENCY (0x40000022) and HV_X64_MSR_APIC_FREQUENCY
+(0x40000023) allowing the guest to get its TSC/APIC frequencies without doing
+measurements.
+
+3.15 hv-reenlightenment
+========================
+The enlightenment is nested specific, it targets Hyper-V on KVM guests. When
+enabled, it provides HV_X64_MSR_REENLIGHTENMENT_CONTROL (0x40000106),
+HV_X64_MSR_TSC_EMULATION_CONTROL (0x40000107)and 
HV_X64_MSR_TSC_EMULATION_STATUS
+(0x40000108) MSRs allowing the guest to get notified when TSC frequency changes
+(only happens on migration) and keep using old frequency (through emulation in
+the hypervisor) until it is ready to switch to the new one. This, in 
conjunction
+with hv-frequencies, allows Hyper-V on KVM to pass stable clocksource 
(Reference
+TSC page) to its own guests.
+
+Recommended: hv-frequencies
+
+3.16. hv-evmcs
+===============
+The enlightenment is nested specific, it targets Hyper-V on KVM guests. When
+enabled, it provides Enlightened VMCS feature to the guest. The feature
+implements paravirtualized protocol between L0 (KVM) and L1 (Hyper-V)
+hypervisors making L2 exits to the hypervisor faster. The feature is 
Intel-only.
+Note: some virtualization features (e.g. Posted Interrupts) are disabled when
+hv-evmcs is enabled. It may make sense to measure your nested workload with and
+without the feature to find out if enabling it is beneficial.
+
+Requires: hv-vapic
+
+
+4. Useful links
+================
+Hyper-V Top Level Functional specification and other information:
+https://github.com/MicrosoftDocs/Virtualization-Documentation
-- 
2.20.1




reply via email to

[Prev in Thread] Current Thread [Next in Thread]