[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PULL 09/23] hw/isa/Kconfig: i82378 SuperIO requires PC spe
From: |
Paolo Bonzini |
Subject: |
[Qemu-devel] [PULL 09/23] hw/isa/Kconfig: i82378 SuperIO requires PC speaker device |
Date: |
Wed, 27 Mar 2019 13:37:47 +0100 |
From: Philippe Mathieu-Daudé <address@hidden>
This fixes when configuring with --without-default-devices:
$ qemu-system-ppc -M prep
qemu-system-ppc: Machine type 'prep' is deprecated: use 40p machine type
instead
qemu-system-ppc: Unknown device 'isa-pcspk' for bus 'ISA'
Fixes: dd0ff8191ab
Signed-off-by: Philippe Mathieu-Daudé <address@hidden>
Message-Id: <address@hidden>
---
hw/isa/Kconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/hw/isa/Kconfig b/hw/isa/Kconfig
index 57e09a0..c9a26c7 100644
--- a/hw/isa/Kconfig
+++ b/hw/isa/Kconfig
@@ -11,6 +11,7 @@ config I82378
select I8254
select I82374
select MC146818RTC
+ select PCSPK
config PC87312
bool
--
1.8.3.1
- [Qemu-devel] [PULL 05/23] target/i386: sev: Do not pin the ram device memory region, (continued)
- [Qemu-devel] [PULL 05/23] target/i386: sev: Do not pin the ram device memory region, Paolo Bonzini, 2019/03/27
- [Qemu-devel] [PULL 04/23] memory: Fix the memory region type assignment order, Paolo Bonzini, 2019/03/27
- [Qemu-devel] [PULL 06/23] hw/char/parallel: Make it possible to compile also without CONFIG_PARALLEL, Paolo Bonzini, 2019/03/27
- [Qemu-devel] [PULL 02/23] kconfig: add CONFIG_MSI_NONBROKEN, Paolo Bonzini, 2019/03/27
- [Qemu-devel] [PULL 08/23] prep: do not select I82374, Paolo Bonzini, 2019/03/27
- [Qemu-devel] [PULL 07/23] hw/i386/Kconfig: PC uses I8257, not I82374, Paolo Bonzini, 2019/03/27
- [Qemu-devel] [PULL 10/23] hw/isa/Kconfig: PIIX4 southbridge requires USB UHCI, Paolo Bonzini, 2019/03/27
- [Qemu-devel] [PULL 11/23] hw/i386/Kconfig: enable devices that can be created by default, Paolo Bonzini, 2019/03/27
- [Qemu-devel] [PULL 13/23] hw/mips/Kconfig: Fulong 2e board requires ati-vga/rtl8139 PCI devices, Paolo Bonzini, 2019/03/27
- [Qemu-devel] [PULL 12/23] hw/mips/Kconfig: Malta machine requires the pcnet network card, Paolo Bonzini, 2019/03/27
- [Qemu-devel] [PULL 09/23] hw/isa/Kconfig: i82378 SuperIO requires PC speaker device,
Paolo Bonzini <=
- [Qemu-devel] [PULL 14/23] hw/ppc/Kconfig: Bamboo machine requires e1000 network card, Paolo Bonzini, 2019/03/27
- [Qemu-devel] [PULL 15/23] hw/ppc/Kconfig: e500 based machines require virtio-net-pci device, Paolo Bonzini, 2019/03/27
- [Qemu-devel] [PULL 16/23] hw/sh4/Kconfig: r2d machine requires the rtl8139 network card, Paolo Bonzini, 2019/03/27
- [Qemu-devel] [PULL 17/23] hw/hppa/Kconfig: Dino board requires e1000 network card, Paolo Bonzini, 2019/03/27
- [Qemu-devel] [PULL 18/23] hw/alpha/Kconfig: DP264 hardware requires e1000 network card, Paolo Bonzini, 2019/03/27
- [Qemu-devel] [PULL 19/23] test-announce-self: convert to qgraph, Paolo Bonzini, 2019/03/27
- [Qemu-devel] [PULL 20/23] intel-iommu: optimize nodmar memory regions, Paolo Bonzini, 2019/03/27
- [Qemu-devel] [PULL 22/23] config-all-devices.mak: rebuild on reconfigure, Paolo Bonzini, 2019/03/27
- [Qemu-devel] [PULL 23/23] virtio-vga: only enable for specific boards, Paolo Bonzini, 2019/03/27
- [Qemu-devel] [PULL 21/23] minikconf: fix parser typo, Paolo Bonzini, 2019/03/27