[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [RFC] arm/cpu: fix soft lockup panic after resuming fro
From: |
Steven Price |
Subject: |
Re: [Qemu-devel] [RFC] arm/cpu: fix soft lockup panic after resuming from stop |
Date: |
Wed, 13 Mar 2019 10:11:30 +0000 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:60.0) Gecko/20100101 Thunderbird/60.5.1 |
On 12/03/2019 14:12, Marc Zyngier wrote:
> Hi Peter,
>
> On 12/03/2019 10:08, Peter Maydell wrote:
>> On Tue, 12 Mar 2019 at 06:10, Heyi Guo <address@hidden> wrote:
>>>
>>> When we stop a VM for more than 30 seconds and then resume it, by qemu
>>> monitor command "stop" and "cont", Linux on VM will complain of "soft
>>> lockup - CPU#x stuck for xxs!" as below:
>>>
>>> [ 2783.809517] watchdog: BUG: soft lockup - CPU#3 stuck for 2395s!
>>> [ 2783.809559] watchdog: BUG: soft lockup - CPU#2 stuck for 2395s!
>>> [ 2783.809561] watchdog: BUG: soft lockup - CPU#1 stuck for 2395s!
>>> [ 2783.809563] Modules linked in...
>>>
>>> This is because Guest Linux uses generic timer virtual counter as
>>> a software watchdog, and CNTVCT_EL0 does not stop when VM is stopped
>>> by qemu.
>>>
>>> This patch is to fix this issue by saving the value of CNTVCT_EL0 when
>>> stopping and restoring it when resuming.
An alternative way of fixing this particular issue ("stop"/"cont"
commands in QEMU) would be to wire up KVM_KVMCLOCK_CTRL for arm to allow
QEMU to signal to the guest that it was forcibly stopped for a while
(and so the watchdog timeout can be ignored by the guest).
>> Hi -- I know we have issues with the passage of time in Arm VMs
>> running under KVM when the VM is suspended, but the topic is
>> a tricky one, and it's not clear to me that this is the correct
>> way to fix it. I would prefer to see us start with a discussion
>> on the kvm-arm mailing list about the best approach to the problem.
>>
>> I've cc'd that list and a couple of the Arm KVM maintainers
>> for their opinion.
>>
>> QEMU patch left below for context -- the brief summary is that
>> it uses KVM_GET_ONE_REG/KVM_SET_ONE_REG on the timer CNT register
>> to save it on VM pause and write that value back on VM resume.
>
> That's probably good enough for this particular use case, but I think
> there is more. I can get into similar trouble if I suspend my laptop, or
> suspend QEMU. It also has the slightly bizarre effect of skewing time,
> and this will affect timekeeping in the guest in ways that are much more
> subtle than just shouty CPUs.
Indeed this is the bigger issue - user space doesn't get an opportunity
to be involved when suspending/resuming, so saving/restoring (or using
KVM_KVMCLOCK_CTRL) in user space won't fix these cases.
> Christoffer and Steve had some stuff regarding Live Physical Time, which
> should cover that, and other cases such as host system suspend, and QEMU
> being suspended.
Live Physical Time (LPT) is only part of the solution - this handles the
mess that otherwise would occur when moving to a new host with a
different clock frequency.
Personally I think what we need is:
* Either a patch like the one from Heyi Guo (save/restore CNTVCT_EL0) or
alternatively hooking up KVM_KVMCLOCK_CTRL to prevent the watchdog
firing when user space explicitly stops scheduling the guest for a while.
* KVM itself saving/restoring CNTVCT_EL0 during suspend/resume so the
guest doesn't see time pass during a suspend.
* Something equivalent to MSR_KVM_WALL_CLOCK_NEW for arm which allows
the guest to query the wall clock time from the host and provides an
offset between CNTVCT_EL0 to wall clock time which the KVM can update
during suspend/resume. This means that during a suspend/resume the guest
can observe that wall clock time has passed, without having to be
bothered about CNTVCT_EL0 jumping forwards.
Steve
- [Qemu-devel] [RFC] arm/cpu: fix soft lockup panic after resuming from stop, Heyi Guo, 2019/03/12
- Re: [Qemu-devel] [RFC] arm/cpu: fix soft lockup panic after resuming from stop, no-reply, 2019/03/12
- Re: [Qemu-devel] [RFC] arm/cpu: fix soft lockup panic after resuming from stop, Heyi Guo, 2019/03/12
- Re: [Qemu-devel] [RFC] arm/cpu: fix soft lockup panic after resuming from stop, Peter Maydell, 2019/03/12
- Re: [Qemu-devel] [RFC] arm/cpu: fix soft lockup panic after resuming from stop, Christoffer Dall, 2019/03/12
- Re: [Qemu-devel] [RFC] arm/cpu: fix soft lockup panic after resuming from stop, Marc Zyngier, 2019/03/12
- Re: [Qemu-devel] [RFC] arm/cpu: fix soft lockup panic after resuming from stop,
Steven Price <=
- Re: [Qemu-devel] [RFC] arm/cpu: fix soft lockup panic after resuming from stop, Heyi Guo, 2019/03/14
- Re: [Qemu-devel] [RFC] arm/cpu: fix soft lockup panic after resuming from stop, Christoffer Dall, 2019/03/15
- Re: [Qemu-devel] [RFC] arm/cpu: fix soft lockup panic after resuming from stop, Heyi Guo, 2019/03/19
- Re: [Qemu-devel] [RFC] arm/cpu: fix soft lockup panic after resuming from stop, Steven Price, 2019/03/20
- Re: [Qemu-devel] [RFC] arm/cpu: fix soft lockup panic after resuming from stop, Heyi Guo, 2019/03/26
- Re: [Qemu-devel] [RFC] arm/cpu: fix soft lockup panic after resuming from stop, Heyi Guo, 2019/03/26
- Re: [Qemu-devel] [RFC] arm/cpu: fix soft lockup panic after resuming from stop, Steven Price, 2019/03/26