[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PULL 37/57] qos-test: virtio-net test node
From: |
Paolo Bonzini |
Subject: |
[Qemu-devel] [PULL 37/57] qos-test: virtio-net test node |
Date: |
Thu, 7 Mar 2019 18:29:44 +0100 |
From: Emanuele Giuseppe Esposito <address@hidden>
Convert tests/virtio-net-test in qgraph test node,
virtio-net-test. This test consumes a virtio-net interface
and checks that its function return the expected values.
Some functions are implemented only for virtio-net-pci, so they
don't consume virtio-net, but virtio-net-pci
Note that this test does not allocate any virtio-net structure,
it's all done by the qtest walking graph mechanism
Signed-off-by: Emanuele Giuseppe Esposito <address@hidden>
Signed-off-by: Paolo Bonzini <address@hidden>
---
tests/Makefile.include | 3 +-
tests/virtio-net-test.c | 224 ++++++++++++++++--------------------------------
2 files changed, 75 insertions(+), 152 deletions(-)
diff --git a/tests/Makefile.include b/tests/Makefile.include
index ec23364..f45d115 100644
--- a/tests/Makefile.include
+++ b/tests/Makefile.include
@@ -153,7 +153,6 @@ check-qtest-generic-y += tests/cdrom-test$(EXESUF)
check-qtest-ipack-y += tests/ipoctal232-test$(EXESUF)
-check-qtest-virtio-y += tests/virtio-net-test$(EXESUF)
check-qtest-virtio-y += tests/virtio-scsi-test$(EXESUF)
check-qtest-pci-y += tests/e1000-test$(EXESUF)
@@ -764,6 +763,7 @@ qos-test-obj-y += tests/sdhci-test.o
qos-test-obj-y += tests/virtio-test.o
qos-test-obj-$(CONFIG_VIRTFS) += tests/virtio-9p-test.o
qos-test-obj-y += tests/virtio-blk-test.o
+qos-test-obj-y += tests/virtio-net-test.o
qos-test-obj-y += tests/virtio-rng-test.o
qos-test-obj-y += tests/virtio-serial-test.o
@@ -812,7 +812,6 @@ tests/ne2000-test$(EXESUF): tests/ne2000-test.o
tests/wdt_ib700-test$(EXESUF): tests/wdt_ib700-test.o
tests/tco-test$(EXESUF): tests/tco-test.o $(libqos-pc-obj-y)
tests/virtio-ccw-test$(EXESUF): tests/virtio-ccw-test.o
-tests/virtio-net-test$(EXESUF): tests/virtio-net-test.o $(libqos-pc-obj-y)
$(libqos-virtio-obj-y)
tests/virtio-scsi-test$(EXESUF): tests/virtio-scsi-test.o
$(libqos-virtio-obj-y)
tests/tpci200-test$(EXESUF): tests/tpci200-test.o
tests/display-vga-test$(EXESUF): tests/display-vga-test.o
diff --git a/tests/virtio-net-test.c b/tests/virtio-net-test.c
index 653148e..2d3630c 100644
--- a/tests/virtio-net-test.c
+++ b/tests/virtio-net-test.c
@@ -9,18 +9,11 @@
#include "qemu/osdep.h"
#include "libqtest.h"
-#include "qemu-common.h"
-#include "qemu/sockets.h"
#include "qemu/iov.h"
-#include "libqos/libqos-pc.h"
-#include "libqos/libqos-spapr.h"
-#include "libqos/virtio.h"
-#include "libqos/virtio-pci.h"
#include "qapi/qmp/qdict.h"
-#include "qemu/bswap.h"
#include "hw/virtio/virtio-net.h"
-#include "standard-headers/linux/virtio_ids.h"
-#include "standard-headers/linux/virtio_ring.h"
+#include "libqos/qgraph.h"
+#include "libqos/virtio-net.h"
#define PCI_SLOT_HP 0x06
#define PCI_SLOT 0x04
@@ -28,63 +21,8 @@
#define QVIRTIO_NET_TIMEOUT_US (30 * 1000 * 1000)
#define VNET_HDR_SIZE sizeof(struct virtio_net_hdr_mrg_rxbuf)
-static void test_end(void)
-{
- qtest_end();
-}
-
#ifndef _WIN32
-static QVirtioPCIDevice *virtio_net_pci_init(QPCIBus *bus, int slot)
-{
- QVirtioPCIDevice *dev;
-
- dev = qvirtio_pci_device_find(bus, VIRTIO_ID_NET);
- g_assert(dev != NULL);
- g_assert_cmphex(dev->vdev.device_type, ==, VIRTIO_ID_NET);
-
- qvirtio_pci_device_enable(dev);
- qvirtio_start_device(&dev->vdev);
-
- return dev;
-}
-
-GCC_FMT_ATTR(1, 2)
-static QOSState *pci_test_start(const char *cmd, ...)
-{
- QOSState *qs;
- va_list ap;
- const char *arch = qtest_get_arch();
-
- if (strcmp(arch, "i386") == 0 || strcmp(arch, "x86_64") == 0) {
- va_start(ap, cmd);
- qs = qtest_pc_vboot(cmd, ap);
- va_end(ap);
- } else if (strcmp(arch, "ppc64") == 0) {
- va_start(ap, cmd);
- qs = qtest_spapr_vboot(cmd, ap);
- va_end(ap);
- } else {
- g_printerr("virtio-net tests are only available on x86 or ppc64\n");
- exit(EXIT_FAILURE);
- }
- global_qtest = qs->qts;
- return qs;
-}
-
-static void driver_init(QVirtioDevice *dev)
-{
- uint32_t features;
-
- features = qvirtio_get_features(dev);
- features = features & ~(QVIRTIO_F_BAD_FEATURE |
- (1u << VIRTIO_RING_F_INDIRECT_DESC) |
- (1u << VIRTIO_RING_F_EVENT_IDX));
- qvirtio_set_features(dev, features);
-
- qvirtio_set_driver_ok(dev);
-}
-
static void rx_test(QVirtioDevice *dev,
QGuestAllocator *alloc, QVirtQueue *vq,
int socket)
@@ -194,128 +132,114 @@ static void rx_stop_cont_test(QVirtioDevice *dev,
guest_free(alloc, req_addr);
}
-static void send_recv_test(QVirtioDevice *dev,
- QGuestAllocator *alloc, QVirtQueue *rvq,
- QVirtQueue *tvq, int socket)
+static void send_recv_test(void *obj, void *data, QGuestAllocator *t_alloc)
{
- rx_test(dev, alloc, rvq, socket);
- tx_test(dev, alloc, tvq, socket);
+ QVirtioNet *net_if = obj;
+ QVirtioDevice *dev = net_if->vdev;
+ QVirtQueue *rx = net_if->rx;
+ QVirtQueue *tx = net_if->tx;
+ int *sv = data;
+
+ rx_test(dev, t_alloc, rx, sv[0]);
+ tx_test(dev, t_alloc, tx, sv[0]);
}
-static void stop_cont_test(QVirtioDevice *dev,
- QGuestAllocator *alloc, QVirtQueue *rvq,
- QVirtQueue *tvq, int socket)
+static void stop_cont_test(void *obj, void *data, QGuestAllocator *t_alloc)
{
- rx_stop_cont_test(dev, alloc, rvq, socket);
+ QVirtioNet *net_if = obj;
+ QVirtioDevice *dev = net_if->vdev;
+ QVirtQueue *rx = net_if->rx;
+ int *sv = data;
+
+ rx_stop_cont_test(dev, t_alloc, rx, sv[0]);
}
-static void pci_basic(gconstpointer data)
-{
- QVirtioPCIDevice *dev;
- QOSState *qs;
- QVirtQueuePCI *tx, *rx;
- void (*func) (QVirtioDevice *dev,
- QGuestAllocator *alloc,
- QVirtQueue *rvq,
- QVirtQueue *tvq,
- int socket) = data;
- int sv[2], ret;
+#endif
- ret = socketpair(PF_UNIX, SOCK_STREAM, 0, sv);
- g_assert_cmpint(ret, !=, -1);
+static void hotplug(void *obj, void *data, QGuestAllocator *t_alloc)
+{
+ const char *arch = qtest_get_arch();
- qs = pci_test_start("-netdev socket,fd=%d,id=hs0 -device "
- "virtio-net-pci,netdev=hs0", sv[1]);
- dev = virtio_net_pci_init(qs->pcibus, PCI_SLOT);
+ qtest_qmp_device_add("virtio-net-pci", "net1",
+ "{'addr': %s}", stringify(PCI_SLOT_HP));
- rx = (QVirtQueuePCI *)qvirtqueue_setup(&dev->vdev, &qs->alloc, 0);
- tx = (QVirtQueuePCI *)qvirtqueue_setup(&dev->vdev, &qs->alloc, 1);
+ if (strcmp(arch, "i386") == 0 || strcmp(arch, "x86_64") == 0) {
+ qpci_unplug_acpi_device_test("net1", PCI_SLOT_HP);
+ }
+}
- driver_init(&dev->vdev);
- func(&dev->vdev, &qs->alloc, &rx->vq, &tx->vq, sv[0]);
+static void virtio_net_test_cleanup(void *sockets)
+{
+ int *sv = sockets;
- /* End test */
close(sv[0]);
- qvirtqueue_cleanup(dev->vdev.bus, &tx->vq, &qs->alloc);
- qvirtqueue_cleanup(dev->vdev.bus, &rx->vq, &qs->alloc);
- qvirtio_pci_device_disable(dev);
- g_free(dev->pdev);
- g_free(dev);
- qtest_shutdown(qs);
+ qos_invalidate_command_line();
+ close(sv[1]);
+ g_free(sv);
+}
+
+static void *virtio_net_test_setup(GString *cmd_line, void *arg)
+{
+ int ret;
+ int *sv = g_new(int, 2);
+
+ ret = socketpair(PF_UNIX, SOCK_STREAM, 0, sv);
+ g_assert_cmpint(ret, !=, -1);
+
+ g_string_append_printf(cmd_line, " -netdev socket,fd=%d,id=hs0 ", sv[1]);
+
+ g_test_queue_destroy(virtio_net_test_cleanup, sv);
+ return sv;
}
-static void large_tx(gconstpointer data)
+static void large_tx(void *obj, void *data, QGuestAllocator *t_alloc)
{
- QVirtioPCIDevice *dev;
- QOSState *qs;
- QVirtQueuePCI *tx, *rx;
- QVirtQueue *vq;
+ QVirtioNet *dev = obj;
+ QVirtQueue *vq = dev->queues[1];
uint64_t req_addr;
uint32_t free_head;
size_t alloc_size = (size_t)data / 64;
int i;
- qs = pci_test_start("-netdev hubport,id=hp0,hubid=0 "
- "-device virtio-net-pci,netdev=hp0");
- dev = virtio_net_pci_init(qs->pcibus, PCI_SLOT);
-
- rx = (QVirtQueuePCI *)qvirtqueue_setup(&dev->vdev, qs->alloc, 0);
- tx = (QVirtQueuePCI *)qvirtqueue_setup(&dev->vdev, qs->alloc, 1);
-
- driver_init(&dev->vdev);
- vq = &tx->vq;
-
/* Bypass the limitation by pointing several descriptors to a single
* smaller area */
- req_addr = guest_alloc(qs->alloc, alloc_size);
+ req_addr = guest_alloc(t_alloc, alloc_size);
free_head = qvirtqueue_add(vq, req_addr, alloc_size, false, true);
for (i = 0; i < 64; i++) {
qvirtqueue_add(vq, req_addr, alloc_size, false, i != 63);
}
- qvirtqueue_kick(&dev->vdev, vq, free_head);
+ qvirtqueue_kick(dev->vdev, vq, free_head);
- qvirtio_wait_used_elem(&dev->vdev, vq, free_head, NULL,
+ qvirtio_wait_used_elem(dev->vdev, vq, free_head, NULL,
QVIRTIO_NET_TIMEOUT_US);
-
- qvirtqueue_cleanup(dev->vdev.bus, &tx->vq, qs->alloc);
- qvirtqueue_cleanup(dev->vdev.bus, &rx->vq, qs->alloc);
- qvirtio_pci_device_disable(dev);
- g_free(dev->pdev);
- g_free(dev);
- qtest_shutdown(qs);
+ guest_free(t_alloc, req_addr);
}
-#endif
-static void hotplug(void)
+static void *virtio_net_test_setup_nosocket(GString *cmd_line, void *arg)
{
- const char *arch = qtest_get_arch();
-
- qtest_start("-device virtio-net-pci");
-
- qtest_qmp_device_add("virtio-net-pci", "net1",
- "{'addr': %s}", stringify(PCI_SLOT_HP));
-
- if (strcmp(arch, "i386") == 0 || strcmp(arch, "x86_64") == 0) {
- qpci_unplug_acpi_device_test("net1", PCI_SLOT_HP);
- }
-
- test_end();
+ g_string_append(cmd_line, " -netdev hubport,hubid=0,id=hs0 ");
+ return arg;
}
-int main(int argc, char **argv)
+static void register_virtio_net_test(void)
{
- g_test_init(&argc, &argv, NULL);
+ QOSGraphTestOptions opts = {
+ .before = virtio_net_test_setup,
+ };
+
+ qos_add_test("hotplug", "virtio-pci", hotplug, &opts);
#ifndef _WIN32
- qtest_add_data_func("/virtio/net/pci/basic", send_recv_test, pci_basic);
- qtest_add_data_func("/virtio/net/pci/rx_stop_cont",
- stop_cont_test, pci_basic);
- qtest_add_data_func("/virtio/net/pci/large_tx_uint_max",
- (gconstpointer)UINT_MAX, large_tx);
- qtest_add_data_func("/virtio/net/pci/large_tx_net_bufsize",
- (gconstpointer)NET_BUFSIZE, large_tx);
+ qos_add_test("basic", "virtio-net", send_recv_test, &opts);
+ qos_add_test("rx_stop_cont", "virtio-net", stop_cont_test, &opts);
#endif
- qtest_add_func("/virtio/net/pci/hotplug", hotplug);
- return g_test_run();
+ /* These tests do not need a loopback backend. */
+ opts.before = virtio_net_test_setup_nosocket;
+ opts.arg = (gpointer)UINT_MAX;
+ qos_add_test("large_tx/uint_max", "virtio-net", large_tx, &opts);
+ opts.arg = (gpointer)NET_BUFSIZE;
+ qos_add_test("large_tx/net_bufsize", "virtio-net", large_tx, &opts);
}
+
+libqos_init(register_virtio_net_test);
--
1.8.3.1
- [Qemu-devel] [PULL 25/57] tests/qgraph: add generic virtio testcases, (continued)
- [Qemu-devel] [PULL 25/57] tests/qgraph: add generic virtio testcases, Paolo Bonzini, 2019/03/07
- [Qemu-devel] [PULL 24/57] tests/libqos: arm/virt machine node, Paolo Bonzini, 2019/03/07
- [Qemu-devel] [PULL 27/57] qos-test: virtio-console and virtio-serial test node, Paolo Bonzini, 2019/03/07
- [Qemu-devel] [PULL 26/57] tests/libqos: virtio-serial driver and interface nodes, Paolo Bonzini, 2019/03/07
- [Qemu-devel] [PULL 30/57] tests/libqos: virtio-balloon driver and interface nodes, Paolo Bonzini, 2019/03/07
- [Qemu-devel] [PULL 28/57] tests/libqos: virtio-9p driver and interface nodes, Paolo Bonzini, 2019/03/07
- [Qemu-devel] [PULL 32/57] tests/libqos: virtio-rng driver and interface nodes, Paolo Bonzini, 2019/03/07
- [Qemu-devel] [PULL 33/57] qos-test: virtio-rng test node, Paolo Bonzini, 2019/03/07
- [Qemu-devel] [PULL 34/57] tests/libqos: virtio-blk driver and interface nodes, Paolo Bonzini, 2019/03/07
- [Qemu-devel] [PULL 36/57] tests/libqos: virtio-net driver and interface nodes, Paolo Bonzini, 2019/03/07
- [Qemu-devel] [PULL 37/57] qos-test: virtio-net test node,
Paolo Bonzini <=
- [Qemu-devel] [PULL 31/57] tests/qgraph: remove virtio-balloon-test, Paolo Bonzini, 2019/03/07
- [Qemu-devel] [PULL 29/57] qos-test: virtio-9p test node, Paolo Bonzini, 2019/03/07
- [Qemu-devel] [PULL 39/57] vhost-user-test: always use 256 MiB of guest memory, Paolo Bonzini, 2019/03/07
- [Qemu-devel] [PULL 35/57] qos-test: virtio-blk test node, Paolo Bonzini, 2019/03/07
- [Qemu-devel] [PULL 41/57] tests/libqos: virtio-scsi driver and interface nodes, Paolo Bonzini, 2019/03/07
- [Qemu-devel] [PULL 38/57] tests/libqos: support multiqueue for virtio-net, Paolo Bonzini, 2019/03/07
- [Qemu-devel] [PULL 42/57] qos-test: virtio-scsi test node, Paolo Bonzini, 2019/03/07
- [Qemu-devel] [PULL 40/57] qos-test: vhost-user test node, Paolo Bonzini, 2019/03/07
- [Qemu-devel] [PULL 45/57] qos-test: ac97 test node, Paolo Bonzini, 2019/03/07
- [Qemu-devel] [PULL 43/57] tests/libqos: remove pre-qgraph QVirtioPCIDevice API, Paolo Bonzini, 2019/03/07