[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v7 13/17] hw/arm/virt: Allocate device_memory
From: |
Igor Mammedov |
Subject: |
Re: [Qemu-devel] [PATCH v7 13/17] hw/arm/virt: Allocate device_memory |
Date: |
Fri, 22 Feb 2019 15:58:31 +0100 |
On Fri, 22 Feb 2019 15:15:36 +0100
Auger Eric <address@hidden> wrote:
> Hi Igor,
>
> On 2/22/19 2:48 PM, Igor Mammedov wrote:
> > On Wed, 20 Feb 2019 23:39:59 +0100
> > Eric Auger <address@hidden> wrote:
> >
> >> The device memory region is located after the initial RAM.
> >> its start/size are 1GB aligned.
> >>
> >> Signed-off-by: Eric Auger <address@hidden>
> >> Signed-off-by: Kwangwoo Lee <address@hidden>
> >>
> >> ---
> >> v6 -> v7:
> >> - check the device memory top does not wrap
> >> - check the device memory can fit the slots
> >>
> >> v4 -> v5:
> >> - device memory set after the initial RAM
> >>
> >> v3 -> v4:
> >> - remove bootinfo.device_memory_start/device_memory_size
> >> - rename VIRT_HOTPLUG_MEM into VIRT_DEVICE_MEM
> >> ---
> >> hw/arm/virt.c | 33 +++++++++++++++++++++++++++++++++
> >> 1 file changed, 33 insertions(+)
> >>
> >> diff --git a/hw/arm/virt.c b/hw/arm/virt.c
> >> index 470ca0ce2d..33ad9b3f63 100644
> >> --- a/hw/arm/virt.c
> >> +++ b/hw/arm/virt.c
> >> @@ -62,6 +62,7 @@
> >> #include "target/arm/internals.h"
> >> #include "hw/mem/pc-dimm.h"
> >> #include "hw/mem/nvdimm.h"
> >> +#include "hw/acpi/acpi.h"
> >>
> >> #define DEFINE_VIRT_MACHINE_LATEST(major, minor, latest) \
> >> static void virt_##major##_##minor##_class_init(ObjectClass *oc, \
> >> @@ -1263,6 +1264,34 @@ static void create_secure_ram(VirtMachineState *vms,
> >> g_free(nodename);
> >> }
> >>
> >> +static void create_device_memory(VirtMachineState *vms, MemoryRegion
> >> *sysmem)
> >> +{
> >> + MachineState *ms = MACHINE(vms);
> >> +
> >> + if (!vms->device_memory_size) {
> > having vms->device_memory_size seems like duplicate, why not to reuse
> > memory_region_size(MachineState::device_memory::mr) like we do elsewhere.
> OK so you mean allocating the ms->device_memory in virt_setmmap? In that
> case, I wonder if all that code shouldn't land in set_memmap directly?
> >
> > Also it would be better to all device_memory allocation/initialization
> > compact and close to each other like it's done in pc/spapr.
> I am not sure I get your point here. alloc & init are done in this
> function. Or do you mean I should rather move that into set_memmap?
I don't have a preference where to put it, could be here or in set_memmap,
what I do care is to keep all device_memory related parts together
(like calculating device_memory base and size and allocating/initializing
structure itself, it's much easier to read when one doesn't have to jump
around code and could see all related code in one place)
>
> Thanks
>
> Eric
> >
> >> + return;
> >> + }
> >> +
> >> + if (ms->ram_slots > ACPI_MAX_RAM_SLOTS) {
> >> + error_report("unsupported number of memory slots: %"PRIu64,
> >> + ms->ram_slots);
> >> + exit(EXIT_FAILURE);
> >> + }
> >> +
> >> + if (QEMU_ALIGN_UP(ms->maxram_size, GiB) != ms->maxram_size) {
> >> + error_report("maximum memory size must be GiB aligned");
> >> + exit(EXIT_FAILURE);
> >> + }
> >> +
> >> + ms->device_memory = g_malloc0(sizeof(*ms->device_memory));
> >> + ms->device_memory->base = vms->device_memory_base;
> >> +
> >> + memory_region_init(&ms->device_memory->mr, OBJECT(vms),
> >> + "device-memory", vms->device_memory_size);
> >> + memory_region_add_subregion(sysmem, ms->device_memory->base,
> >> + &ms->device_memory->mr);
> >> +}
> >> +
> >> static void *machvirt_dtb(const struct arm_boot_info *binfo, int
> >> *fdt_size)
> >> {
> >> const VirtMachineState *board = container_of(binfo, VirtMachineState,
> >> @@ -1610,6 +1639,10 @@ static void machvirt_init(MachineState *machine)
> >> machine->ram_size);
> >> memory_region_add_subregion(sysmem, vms->memmap[VIRT_MEM].base, ram);
> >>
> >> + if (vms->extended_memmap) {
> >> + create_device_memory(vms, sysmem);
> >> + }
> >> +
> >> create_flash(vms, sysmem, secure_sysmem ? secure_sysmem : sysmem);
> >>
> >> create_gic(vms, pic);
> >
>
- Re: [Qemu-devel] [PATCH v7 08/17] hw/arm/virt: Implement kvm_type function for 4.0 machine, (continued)
[Qemu-devel] [PATCH v7 09/17] hw/arm/virt: Bump the 255GB initial RAM limit, Eric Auger, 2019/02/20
[Qemu-devel] [PATCH v7 12/17] hw/arm/virt-acpi-build: Add PC-DIMM in SRAT, Eric Auger, 2019/02/20
[Qemu-devel] [PATCH v7 11/17] hw/arm/boot: Expose the PC-DIMM nodes in the DT, Eric Auger, 2019/02/20
[Qemu-devel] [PATCH v7 13/17] hw/arm/virt: Allocate device_memory, Eric Auger, 2019/02/20
[Qemu-devel] [PATCH v7 14/17] nvdimm: use configurable ACPI IO base and size, Eric Auger, 2019/02/20
[Qemu-devel] [PATCH v7 10/17] hw/arm/virt: Add memory hotplug framework, Eric Auger, 2019/02/20
[Qemu-devel] [PATCH v7 15/17] hw/arm/virt: Add nvdimm hot-plug infrastructure, Eric Auger, 2019/02/20
[Qemu-devel] [PATCH v7 16/17] hw/arm/boot: Expose the pmem nodes in the DT, Eric Auger, 2019/02/20
[Qemu-devel] [PATCH v7 17/17] hw/arm/virt: Add nvdimm and nvdimm-persistence options, Eric Auger, 2019/02/20