Re: [Qemu-devel] [RFC 1/4] numa, spapr: add thread-id in the possible_cpus list

[David Gibson]

On Tue, Feb 12, 2019 at 10:48:24PM +0100, Laurent Vivier wrote:
> spapr_possible_cpu_arch_ids() counts only cores, and so
> the number of available CPUs is the number of vCPU divided
> by smp_threads.
> 
> ... -smp 4,maxcpus=8,cores=2,threads=2,sockets=2 -numa node,cpus=0,cpus=1 \
>                                                  -numa node,cpus=3,cpus=4 \
>                                                  -numa node -numa node
> 
> This generates (info hotpluggable-cpus)
> 
>   node-id: 0 core-id: 0 thread-id: 0 [thread-id: 1]
>   node-id: 0 core-id: 6 thread-id: 0 [thread-id: 1]
>   node-id: 1 core-id: 2 thread-id: 0 [thread-id: 1]
>   node-id: 1 core-id: 4 thread-id: 0 [thread-id: 1]
> 
> And this command line generates the following error:
> 
>   CPU(s) not present in any NUMA nodes: CPU 3 [core-id: 6]
> 
> That is wrong because CPU 3 [core-id: 6] is assigned to node-id 0
> Moreover "cpus=4" is not valid, because it means core-id 8 but
> maxcpus is 8.
> 
> With this patch we have now:
> 
>   node-id: 0 core-id: 0 thread-id: 0
>   node-id: 0 core-id: 0 thread-id: 1
>   node-id: 0 core-id: 1 thread-id: 0
>   node-id: 1 core-id: 1 thread-id: 1
>   node-id: 0 core-id: 2 thread-id: 1
>   node-id: 1 core-id: 2 thread-id: 0
>   node-id: 0 core-id: 3 thread-id: 1
>   node-id: 0 core-id: 3 thread-id: 0

I'm afraid this is not the right solution.  The point of the
hotpluggable cpus table is that it has exactly one entry for each
hotpluggable unit.  For PAPR that's a core, not a thread.

So, the problem is with how the NUMA configuration code is
interpreting possible-cpus, not how the machine is building the table.

> CPUs 0 (core-id: 0 thread-id: 0) and 1 (core-id: 0 thread-id: 1) are
> correctly assigned to node-id 0, CPUs 3 (core-id: 1 thread-id: 1) and
>  4 (core-id: 2 thread-id: 0) are correctly assigned to node-id 1.
> All other CPUs are assigned to node-id 0 by default.
> 
> And the error message is also correct:
> 
>   CPU(s) not present in any NUMA nodes: CPU 2 [core-id: 1, thread-id: 0], \
>                                         CPU 5 [core-id: 2, thread-id: 1], \
>                                         CPU 6 [core-id: 3, thread-id: 0], \
>                                         CPU 7 [core-id: 3, thread-id: 1]
> 
> Fixes: ec78f8114bc4 ("numa: use possible_cpus for not mapped CPUs check")
> Cc: address@hidden
> 
> Before commit ec78f8114bc4, output was correct:
> 
>   CPU(s) not present in any NUMA nodes: 2 5 6 7
> 
> Signed-off-by: Laurent Vivier <address@hidden>
> ---
>  hw/ppc/spapr.c | 33 +++++++++++++--------------------
>  1 file changed, 13 insertions(+), 20 deletions(-)
> 
> diff --git a/hw/ppc/spapr.c b/hw/ppc/spapr.c
> index 332cba89d425..7196ba09da34 100644
> --- a/hw/ppc/spapr.c
> +++ b/hw/ppc/spapr.c
> @@ -2404,15 +2404,13 @@ static void spapr_validate_node_memory(MachineState 
> *machine, Error **errp)
>  /* find cpu slot in machine->possible_cpus by core_id */
>  static CPUArchId *spapr_find_cpu_slot(MachineState *ms, uint32_t id, int 
> *idx)
>  {
> -    int index = id / smp_threads;
> -
> -    if (index >= ms->possible_cpus->len) {
> +    if (id >= ms->possible_cpus->len) {
>          return NULL;
>      }
>      if (idx) {
> -        *idx = index;
> +        *idx = id;
>      }
> -    return &ms->possible_cpus->cpus[index];
> +    return &ms->possible_cpus->cpus[id];
>  }
>  
>  static void spapr_set_vsmt_mode(sPAPRMachineState *spapr, Error **errp)
> @@ -2514,7 +2512,7 @@ static void spapr_init_cpus(sPAPRMachineState *spapr)
>              error_report("This machine version does not support CPU 
> hotplug");
>              exit(1);
>          }
> -        boot_cores_nr = possible_cpus->len;
> +        boot_cores_nr = possible_cpus->len / smp_threads;
>      }
>  
>      if (smc->pre_2_10_has_unused_icps) {
> @@ -2528,7 +2526,7 @@ static void spapr_init_cpus(sPAPRMachineState *spapr)
>          }
>      }
>  
> -    for (i = 0; i < possible_cpus->len; i++) {
> +    for (i = 0; i < possible_cpus->len / smp_threads; i++) {
>          int core_id = i * smp_threads;
>  
>          if (mc->has_hotpluggable_cpus) {
> @@ -3795,21 +3793,16 @@ spapr_cpu_index_to_props(MachineState *machine, 
> unsigned cpu_index)
>  
>  static int64_t spapr_get_default_cpu_node_id(const MachineState *ms, int idx)
>  {
> -    return idx / smp_cores % nb_numa_nodes;
> +    return idx / (smp_cores * smp_threads) % nb_numa_nodes;
>  }
>  
>  static const CPUArchIdList *spapr_possible_cpu_arch_ids(MachineState 
> *machine)
>  {
>      int i;
>      const char *core_type;
> -    int spapr_max_cores = max_cpus / smp_threads;
> -    MachineClass *mc = MACHINE_GET_CLASS(machine);
>  
> -    if (!mc->has_hotpluggable_cpus) {
> -        spapr_max_cores = QEMU_ALIGN_UP(smp_cpus, smp_threads) / smp_threads;
> -    }
>      if (machine->possible_cpus) {
> -        assert(machine->possible_cpus->len == spapr_max_cores);
> +        assert(machine->possible_cpus->len == max_cpus);
>          return machine->possible_cpus;
>      }
>  
> @@ -3820,16 +3813,16 @@ static const CPUArchIdList 
> *spapr_possible_cpu_arch_ids(MachineState *machine)
>      }
>  
>      machine->possible_cpus = g_malloc0(sizeof(CPUArchIdList) +
> -                             sizeof(CPUArchId) * spapr_max_cores);
> -    machine->possible_cpus->len = spapr_max_cores;
> +                             sizeof(CPUArchId) * max_cpus);
> +    machine->possible_cpus->len = max_cpus;
>      for (i = 0; i < machine->possible_cpus->len; i++) {
> -        int core_id = i * smp_threads;
> -
>          machine->possible_cpus->cpus[i].type = core_type;
>          machine->possible_cpus->cpus[i].vcpus_count = smp_threads;
> -        machine->possible_cpus->cpus[i].arch_id = core_id;
> +        machine->possible_cpus->cpus[i].arch_id = i;
>          machine->possible_cpus->cpus[i].props.has_core_id = true;
> -        machine->possible_cpus->cpus[i].props.core_id = core_id;
> +        machine->possible_cpus->cpus[i].props.core_id = i / smp_threads;
> +        machine->possible_cpus->cpus[i].props.has_thread_id = true;
> +        machine->possible_cpus->cpus[i].props.thread_id = i % smp_threads;
>      }
>      return machine->possible_cpus;
>  }

-- 
David Gibson                    | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au  | minimalist, thank you.  NOT _the_ _other_
                                | _way_ _around_!
http://www.ozlabs.org/~dgibson

signature.asc
Description: PGP signature