qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [RFC PATCH] gdbstub: Avoid NULL dereference in gdb_handle_p


From: Philippe Mathieu-Daudé
Subject: [Qemu-devel] [RFC PATCH] gdbstub: Avoid NULL dereference in gdb_handle_packet()
Date: Fri, 18 Jan 2019 12:22:13 +0100

The "Hg" GDB packet is used to select the current thread, and can fail.
GDB doesn't not check for failure and emits further packets that can
access and dereference s->c_cpu or s->g_cpu.

Add a check that returns "E22" (EINVAL) when those pointers are not set.

Peter Maydell reported:
  GDB doesn't check the "Hg" packet failures and emit a
  "qXfer:features:read" packet which accesses th
  Looking at the protocol trace from the gdb end:
  (gdb) set debug remote 1
  (gdb) target remote :1234
  Remote debugging using :1234
  Sending packet:
  
$qSupported:multiprocess+;swbreak+;hwbreak+;qRelocInsn+;fork-events+;vfork-events+;exec-events+;vContSupported+;QThreadEvents+;no-resumed+;xmlRegisters=i386#6a...Ack
  Packet received: PacketSize=1000;qXfer:features:read+;multiprocess+
  Packet qSupported (supported-packets) is supported
  Sending packet: $vMustReplyEmpty#3a...Ack
  Packet received:
  Sending packet: $Hgp0.0#ad...Ack
  Packet received: E22
  Sending packet: $qXfer:features:read:target.xml:0,ffb#79...Ack
  [here is where QEMU crashes]

  What seems to happen is that GDB's attempt to set the
  current thread with the "Hg" command fails because
  gdb_get_cpu() fails, and so we return an E22 error status.
  GDB (incorrectly) ignores this and issues a general command
  anyway, and then QEMU crashes because we don't handle s->g_cpu
  being NULL in this command's handling code.

Fixes: c145eeae1cc
Reported-by: Peter Maydell <address@hidden>
Signed-off-by: Philippe Mathieu-Daudé <address@hidden>
---
RFC because these are many if..break but I can't think of a cleaner way
today.
The protocol isn't specific about the error, can it be "E03" for ESRCH
(No such process)?
---
 gdbstub.c | 40 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 40 insertions(+)

diff --git a/gdbstub.c b/gdbstub.c
index bfc7afb509..480005b094 100644
--- a/gdbstub.c
+++ b/gdbstub.c
@@ -1306,6 +1306,10 @@ static int gdb_handle_packet(GDBState *s, const char 
*line_buf)
         put_packet(s, "OK");
         break;
     case '?':
+        if (!s->c_cpu) {
+            put_packet(s, "E22");
+            break;
+        }
         /* TODO: Make this return the correct value for user-mode.  */
         snprintf(buf, sizeof(buf), "T%02xthread:%s;", GDB_SIGNAL_TRAP,
                  gdb_fmt_thread_id(s, s->c_cpu, thread_id, sizeof(thread_id)));
@@ -1394,6 +1398,10 @@ static int gdb_handle_packet(GDBState *s, const char 
*line_buf)
         /* Detach packet */
         pid = 1;
 
+        if (!s->c_cpu || !s->g_cpu) {
+            put_packet(s, "E22");
+            break;
+        }
         if (s->multiprocess) {
             unsigned long lpid;
             if (*p != ';') {
@@ -1429,6 +1437,10 @@ static int gdb_handle_packet(GDBState *s, const char 
*line_buf)
         put_packet(s, "OK");
         break;
     case 's':
+        if (!s->s_cpu) {
+            put_packet(s, "E22");
+            break;
+        }
         if (*p != '\0') {
             addr = strtoull(p, (char **)&p, 16);
             gdb_set_cpu_pc(s, addr);
@@ -1441,6 +1453,10 @@ static int gdb_handle_packet(GDBState *s, const char 
*line_buf)
             target_ulong ret;
             target_ulong err;
 
+            if (!s->s_cpu) {
+                put_packet(s, "E22");
+                break;
+            }
             ret = strtoull(p, (char **)&p, 16);
             if (*p == ',') {
                 p++;
@@ -1463,6 +1479,10 @@ static int gdb_handle_packet(GDBState *s, const char 
*line_buf)
         }
         break;
     case 'g':
+        if (!s->g_cpu) {
+            put_packet(s, "E22");
+            break;
+        }
         cpu_synchronize_state(s->g_cpu);
         len = 0;
         for (addr = 0; addr < s->g_cpu->gdb_num_g_regs; addr++) {
@@ -1473,6 +1493,10 @@ static int gdb_handle_packet(GDBState *s, const char 
*line_buf)
         put_packet(s, buf);
         break;
     case 'G':
+        if (!s->g_cpu) {
+            put_packet(s, "E22");
+            break;
+        }
         cpu_synchronize_state(s->g_cpu);
         registers = mem_buf;
         len = strlen(p) / 2;
@@ -1485,6 +1509,10 @@ static int gdb_handle_packet(GDBState *s, const char 
*line_buf)
         put_packet(s, "OK");
         break;
     case 'm':
+        if (!s->g_cpu) {
+            put_packet(s, "E22");
+            break;
+        }
         addr = strtoull(p, (char **)&p, 16);
         if (*p == ',')
             p++;
@@ -1504,6 +1532,10 @@ static int gdb_handle_packet(GDBState *s, const char 
*line_buf)
         }
         break;
     case 'M':
+        if (!s->g_cpu) {
+            put_packet(s, "E22");
+            break;
+        }
         addr = strtoull(p, (char **)&p, 16);
         if (*p == ',')
             p++;
@@ -1642,6 +1674,10 @@ static int gdb_handle_packet(GDBState *s, const char 
*line_buf)
             put_packet(s, "OK");
             break;
         } else if (strcmp(p,"C") == 0) {
+            if (!s->g_cpu) {
+                put_packet(s, "E22");
+                break;
+            }
             /*
              * "Current thread" remains vague in the spec, so always return
              * the first thread of the current process (gdb returns the
@@ -1745,6 +1781,10 @@ static int gdb_handle_packet(GDBState *s, const char 
*line_buf)
             const char *xml;
             target_ulong total_len;
 
+            if (!s->g_cpu) {
+                put_packet(s, "E22");
+                break;
+            }
             process = gdb_get_cpu_process(s, s->g_cpu);
             cc = CPU_GET_CLASS(s->g_cpu);
             if (cc->gdb_core_xml_file == NULL) {
-- 
2.17.2




reply via email to

[Prev in Thread] Current Thread [Next in Thread]