Re: [Qemu-devel] [PATCH v3 1/2] intel-iommu: differentiate host address width from IOVA address width.

[Yu Zhang]

On Tue, Dec 18, 2018 at 09:58:35AM -0500, Michael S. Tsirkin wrote:
> On Tue, Dec 18, 2018 at 03:55:36PM +0100, Igor Mammedov wrote:
> > On Tue, 18 Dec 2018 17:27:23 +0800
> > Yu Zhang <address@hidden> wrote:
> > 
> > > On Mon, Dec 17, 2018 at 02:17:40PM +0100, Igor Mammedov wrote:
> > > > On Wed, 12 Dec 2018 21:05:38 +0800
> > > > Yu Zhang <address@hidden> wrote:
> > > > 
> > > > > Currently, vIOMMU is using the value of IOVA address width, instead of
> > > > > the host address width(HAW) to calculate the number of reserved bits 
> > > > > in
> > > > > data structures such as root entries, context entries, and entries of
> > > > > DMA paging structures etc.
> > > > > 
> > > > > However values of IOVA address width and of the HAW may not equal. For
> > > > > example, a 48-bit IOVA can only be mapped to host addresses no wider 
> > > > > than
> > > > > 46 bits. Using 48, instead of 46 to calculate the reserved bit may 
> > > > > result
> > > > > in an invalid IOVA being accepted.
> > > > > 
> > > > > To fix this, a new field - haw_bits is introduced in struct 
> > > > > IntelIOMMUState,
> > > > > whose value is initialized based on the maximum physical address set 
> > > > > to
> > > > > guest CPU.
> > > > 
> > > > > Also, definitions such as VTD_HOST_AW_39/48BIT etc. are renamed
> > > > > to clarify.
> > > > > 
> > > > > Signed-off-by: Yu Zhang <address@hidden>
> > > > > Reviewed-by: Peter Xu <address@hidden>
> > > > > ---
> > > > [...]
> > > > 
> > > > > @@ -3100,6 +3104,8 @@ static void vtd_iommu_replay(IOMMUMemoryRegion 
> > > > > *iommu_mr, IOMMUNotifier *n)
> > > > >  static void vtd_init(IntelIOMMUState *s)
> > > > >  {
> > > > >      X86IOMMUState *x86_iommu = X86_IOMMU_DEVICE(s);
> > > > > +    CPUState *cs = first_cpu;
> > > > > +    X86CPU *cpu = X86_CPU(cs);
> > > > >  
> > > > >      memset(s->csr, 0, DMAR_REG_SIZE);
> > > > >      memset(s->wmask, 0, DMAR_REG_SIZE);
> > > > > @@ -3119,23 +3125,24 @@ static void vtd_init(IntelIOMMUState *s)
> > > > >      s->cap = VTD_CAP_FRO | VTD_CAP_NFR | VTD_CAP_ND |
> > > > >               VTD_CAP_MAMV | VTD_CAP_PSI | VTD_CAP_SLLPS |
> > > > >               VTD_CAP_SAGAW_39bit | VTD_CAP_MGAW(s->aw_bits);
> > > > > -    if (s->aw_bits == VTD_HOST_AW_48BIT) {
> > > > > +    if (s->aw_bits == VTD_AW_48BIT) {
> > > > >          s->cap |= VTD_CAP_SAGAW_48bit;
> > > > >      }
> > > > >      s->ecap = VTD_ECAP_QI | VTD_ECAP_IRO;
> > > > > +    s->haw_bits = cpu->phys_bits;
> > > > Is it possible to avoid accessing CPU fields directly or cpu altogether
> > > > and set phys_bits when iommu is created?
> > > 
> > > Thanks for your comments, Igor.
> > > 
> > > Well, I guess you prefer not to query the CPU capabilities while deciding
> > > the vIOMMU features. But to me, they are not that irrelevant.:)
> > > 
> > > Here the hardware address width in vt-d, and the one in cpuid.MAXPHYSADDR
> > > are referring to the same concept. In VM, both are the maximum guest 
> > > physical
> > > address width. If we do not check the CPU field here, we will still have 
> > > to
> > > check the CPU field in other places such as build_dmar_q35(), and reset 
> > > the
> > > s->haw_bits again.
> > > 
> > > Is this explanation convincing enough? :)
> > current build_dmar_q35() doesn't do it, it's all new code in this series 
> > that
> > contains not acceptable direct access from one device (iommu) to another 
> > (cpu).   
> > Proper way would be for the owner of iommu to fish limits from somewhere 
> > and set
> > values during iommu creation.
> 
> Maybe it's a good idea to add documentation for now.

Thanks Michael. So what kind of documentation do you refer? 

> 
> It would be nice not to push this stuff up the stack,
> it's unfortunate that our internal APIs make it hard.

Sorry, I do not quite get it. What do you mean "internal APIs make it hard"? :)

> 
> 
> > > > 
> > > > Perhaps Eduardo
> > > >  can suggest better approach, since he's more familiar with phys_bits 
> > > > topic
> > > 
> > > @Eduardo, any comments? Thanks!
> > > 
> > > > 
> > > > >      /*
> > > > >       * Rsvd field masks for spte
> > > > >       */
> > > > >      vtd_paging_entry_rsvd_field[0] = ~0ULL;
> > > > > -    vtd_paging_entry_rsvd_field[1] = 
> > > > > VTD_SPTE_PAGE_L1_RSVD_MASK(s->aw_bits);
> > > > > -    vtd_paging_entry_rsvd_field[2] = 
> > > > > VTD_SPTE_PAGE_L2_RSVD_MASK(s->aw_bits);
> > > > > -    vtd_paging_entry_rsvd_field[3] = 
> > > > > VTD_SPTE_PAGE_L3_RSVD_MASK(s->aw_bits);
> > > > > -    vtd_paging_entry_rsvd_field[4] = 
> > > > > VTD_SPTE_PAGE_L4_RSVD_MASK(s->aw_bits);
> > > > > -    vtd_paging_entry_rsvd_field[5] = 
> > > > > VTD_SPTE_LPAGE_L1_RSVD_MASK(s->aw_bits);
> > > > > -    vtd_paging_entry_rsvd_field[6] = 
> > > > > VTD_SPTE_LPAGE_L2_RSVD_MASK(s->aw_bits);
> > > > > -    vtd_paging_entry_rsvd_field[7] = 
> > > > > VTD_SPTE_LPAGE_L3_RSVD_MASK(s->aw_bits);
> > > > > -    vtd_paging_entry_rsvd_field[8] = 
> > > > > VTD_SPTE_LPAGE_L4_RSVD_MASK(s->aw_bits);
> > > > > +    vtd_paging_entry_rsvd_field[1] = 
> > > > > VTD_SPTE_PAGE_L1_RSVD_MASK(s->haw_bits);
> > > > > +    vtd_paging_entry_rsvd_field[2] = 
> > > > > VTD_SPTE_PAGE_L2_RSVD_MASK(s->haw_bits);
> > > > > +    vtd_paging_entry_rsvd_field[3] = 
> > > > > VTD_SPTE_PAGE_L3_RSVD_MASK(s->haw_bits);
> > > > > +    vtd_paging_entry_rsvd_field[4] = 
> > > > > VTD_SPTE_PAGE_L4_RSVD_MASK(s->haw_bits);
> > > > > +    vtd_paging_entry_rsvd_field[5] = 
> > > > > VTD_SPTE_LPAGE_L1_RSVD_MASK(s->haw_bits);
> > > > > +    vtd_paging_entry_rsvd_field[6] = 
> > > > > VTD_SPTE_LPAGE_L2_RSVD_MASK(s->haw_bits);
> > > > > +    vtd_paging_entry_rsvd_field[7] = 
> > > > > VTD_SPTE_LPAGE_L3_RSVD_MASK(s->haw_bits);
> > > > > +    vtd_paging_entry_rsvd_field[8] = 
> > > > > VTD_SPTE_LPAGE_L4_RSVD_MASK(s->haw_bits);
> > > > >  
> > > > >      if (x86_iommu->intr_supported) {
> > > > >          s->ecap |= VTD_ECAP_IR | VTD_ECAP_MHMV;
> > > > > @@ -3261,10 +3268,10 @@ static bool vtd_decide_config(IntelIOMMUState 
> > > > > *s, Error **errp)
> > > > >      }
> > > > >  
> > > > >      /* Currently only address widths supported are 39 and 48 bits */
> > > > > -    if ((s->aw_bits != VTD_HOST_AW_39BIT) &&
> > > > > -        (s->aw_bits != VTD_HOST_AW_48BIT)) {
> > > > > +    if ((s->aw_bits != VTD_AW_39BIT) &&
> > > > > +        (s->aw_bits != VTD_AW_48BIT)) {
> > > > >          error_setg(errp, "Supported values for x-aw-bits are: %d, 
> > > > > %d",
> > > > > -                   VTD_HOST_AW_39BIT, VTD_HOST_AW_48BIT);
> > > > > +                   VTD_AW_39BIT, VTD_AW_48BIT);
> > > > >          return false;
> > > > >      }
> > > > >  
> > > > > diff --git a/include/hw/i386/intel_iommu.h 
> > > > > b/include/hw/i386/intel_iommu.h
> > > > > index ed4e758..820451c 100644
> > > > > --- a/include/hw/i386/intel_iommu.h
> > > > > +++ b/include/hw/i386/intel_iommu.h
> > > > > @@ -47,9 +47,9 @@
> > > > >  #define VTD_SID_TO_DEVFN(sid)       ((sid) & 0xff)
> > > > >  
> > > > >  #define DMAR_REG_SIZE               0x230
> > > > > -#define VTD_HOST_AW_39BIT           39
> > > > > -#define VTD_HOST_AW_48BIT           48
> > > > > -#define VTD_HOST_ADDRESS_WIDTH      VTD_HOST_AW_39BIT
> > > > > +#define VTD_AW_39BIT                39
> > > > > +#define VTD_AW_48BIT                48
> > > > > +#define VTD_ADDRESS_WIDTH           VTD_AW_39BIT
> > > > >  #define VTD_HAW_MASK(aw)            ((1ULL << (aw)) - 1)
> > > > >  
> > > > >  #define DMAR_REPORT_F_INTR          (1)
> > > > > @@ -244,7 +244,8 @@ struct IntelIOMMUState {
> > > > >      bool intr_eime;                 /* Extended interrupt mode 
> > > > > enabled */
> > > > >      OnOffAuto intr_eim;             /* Toggle for EIM cabability */
> > > > >      bool buggy_eim;                 /* Force buggy EIM unless 
> > > > > eim=off */
> > > > > -    uint8_t aw_bits;                /* Host/IOVA address width (in 
> > > > > bits) */
> > > > > +    uint8_t aw_bits;                /* IOVA address width (in bits) 
> > > > > */
> > > > > +    uint8_t haw_bits;               /* Hardware address width (in 
> > > > > bits) */
> > > > >  
> > > > >      /*
> > > > >       * Protects IOMMU states in general.  Currently it protects the
> > > > 
> > > > 
> > > 
> > > B.R.
> > > Yu
> 

B.R.
Yu