[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH v4 04/11] pci/pcie: stop plug/unplug if the slot is
From: |
David Hildenbrand |
Subject: |
[Qemu-devel] [PATCH v4 04/11] pci/pcie: stop plug/unplug if the slot is locked |
Date: |
Wed, 12 Dec 2018 10:16:16 +0100 |
We better stop right away. For now, errors would be partially ignored
(so the guest might get informed or the device might get unplugged),
although actual plug/unplug will be reported as failed to the user.
While at it, properly move the check to the pre_plug handler for the plug
case, as we can test the slot state before the device will be realized.
Reviewed-by: Igor Mammedov <address@hidden>
Reviewed-by: David Gibson <address@hidden>
Signed-off-by: David Hildenbrand <address@hidden>
---
hw/pci/pcie.c | 25 +++++++++++++++++--------
hw/pci/pcie_port.c | 1 +
include/hw/pci/pcie.h | 2 ++
3 files changed, 20 insertions(+), 8 deletions(-)
diff --git a/hw/pci/pcie.c b/hw/pci/pcie.c
index 44737cc1cd..ccba29269e 100644
--- a/hw/pci/pcie.c
+++ b/hw/pci/pcie.c
@@ -316,10 +316,10 @@ static void pcie_cap_slot_event(PCIDevice *dev,
PCIExpressHotPlugEvent event)
}
static void pcie_cap_slot_plug_common(PCIDevice *hotplug_dev, DeviceState *dev,
- uint8_t **exp_cap, Error **errp)
+ Error **errp)
{
- *exp_cap = hotplug_dev->config + hotplug_dev->exp.exp_cap;
- uint16_t sltsta = pci_get_word(*exp_cap + PCI_EXP_SLTSTA);
+ uint8_t *exp_cap = hotplug_dev->config + hotplug_dev->exp.exp_cap;
+ uint16_t sltsta = pci_get_word(exp_cap + PCI_EXP_SLTSTA);
PCIE_DEV_PRINTF(PCI_DEVICE(dev), "hotplug state: 0x%x\n", sltsta);
if (sltsta & PCI_EXP_SLTSTA_EIS) {
@@ -330,14 +330,19 @@ static void pcie_cap_slot_plug_common(PCIDevice
*hotplug_dev, DeviceState *dev,
}
}
+void pcie_cap_slot_pre_plug_cb(HotplugHandler *hotplug_dev, DeviceState *dev,
+ Error **errp)
+{
+ pcie_cap_slot_plug_common(PCI_DEVICE(hotplug_dev), dev, errp);
+}
+
void pcie_cap_slot_plug_cb(HotplugHandler *hotplug_dev, DeviceState *dev,
Error **errp)
{
- uint8_t *exp_cap;
+ PCIDevice *hotplug_pdev = PCI_DEVICE(hotplug_dev);
+ uint8_t *exp_cap = hotplug_pdev->config + hotplug_pdev->exp.exp_cap;
PCIDevice *pci_dev = PCI_DEVICE(dev);
- pcie_cap_slot_plug_common(PCI_DEVICE(hotplug_dev), dev, &exp_cap, errp);
-
/* Don't send event when device is enabled during qemu machine creation:
* it is present on boot, no hotplug event is necessary. We do send an
* event when the device is disabled later. */
@@ -367,11 +372,15 @@ static void pcie_unplug_device(PCIBus *bus, PCIDevice
*dev, void *opaque)
void pcie_cap_slot_unplug_request_cb(HotplugHandler *hotplug_dev,
DeviceState *dev, Error **errp)
{
- uint8_t *exp_cap;
+ Error *local_err = NULL;
PCIDevice *pci_dev = PCI_DEVICE(dev);
PCIBus *bus = pci_get_bus(pci_dev);
- pcie_cap_slot_plug_common(PCI_DEVICE(hotplug_dev), dev, &exp_cap, errp);
+ pcie_cap_slot_plug_common(PCI_DEVICE(hotplug_dev), dev, &local_err);
+ if (local_err) {
+ error_propagate(errp, local_err);
+ return;
+ }
/* In case user cancel the operation of multi-function hot-add,
* remove the function that is unexposed to guest individually,
diff --git a/hw/pci/pcie_port.c b/hw/pci/pcie_port.c
index 73e81e5847..7982a87880 100644
--- a/hw/pci/pcie_port.c
+++ b/hw/pci/pcie_port.c
@@ -154,6 +154,7 @@ static void pcie_slot_class_init(ObjectClass *oc, void
*data)
HotplugHandlerClass *hc = HOTPLUG_HANDLER_CLASS(oc);
dc->props = pcie_slot_props;
+ hc->pre_plug = pcie_cap_slot_pre_plug_cb;
hc->plug = pcie_cap_slot_plug_cb;
hc->unplug_request = pcie_cap_slot_unplug_request_cb;
}
diff --git a/include/hw/pci/pcie.h b/include/hw/pci/pcie.h
index 735f8e8154..d9fbcf4a4a 100644
--- a/include/hw/pci/pcie.h
+++ b/include/hw/pci/pcie.h
@@ -131,6 +131,8 @@ void pcie_ari_init(PCIDevice *dev, uint16_t offset,
uint16_t nextfn);
void pcie_dev_ser_num_init(PCIDevice *dev, uint16_t offset, uint64_t ser_num);
void pcie_ats_init(PCIDevice *dev, uint16_t offset);
+void pcie_cap_slot_pre_plug_cb(HotplugHandler *hotplug_dev, DeviceState *dev,
+ Error **errp);
void pcie_cap_slot_plug_cb(HotplugHandler *hotplug_dev, DeviceState *dev,
Error **errp);
void pcie_cap_slot_unplug_request_cb(HotplugHandler *hotplug_dev,
--
2.17.2
- [Qemu-devel] [PATCH v4 00/11] pci: hotplug handler reworks, David Hildenbrand, 2018/12/12
- [Qemu-devel] [PATCH v4 01/11] pci/pcie: rename hotplug handler callbacks, David Hildenbrand, 2018/12/12
- [Qemu-devel] [PATCH v4 02/11] pci/shpc: rename hotplug handler callbacks, David Hildenbrand, 2018/12/12
- [Qemu-devel] [PATCH v4 03/11] s390x/pci: rename hotplug handler callbacks, David Hildenbrand, 2018/12/12
- [Qemu-devel] [PATCH v4 04/11] pci/pcie: stop plug/unplug if the slot is locked,
David Hildenbrand <=
- [Qemu-devel] [PATCH v4 05/11] pci/pcihp: perform check for bus capability in pre_plug handler, David Hildenbrand, 2018/12/12
- [Qemu-devel] [PATCH v4 06/11] pci/pcihp: overwrite hotplug handler recursively from the start, David Hildenbrand, 2018/12/12
- [Qemu-devel] [PATCH v4 07/11] pci/pcihp: perform unplug via the hotplug handler, David Hildenbrand, 2018/12/12
- [Qemu-devel] [PATCH v4 09/11] pci: Reuse pci-bridge hotplug handler handlers for pcie-pci-bridge, David Hildenbrand, 2018/12/12
- [Qemu-devel] [PATCH v4 08/11] pci/pcie: perform unplug via the hotplug handler, David Hildenbrand, 2018/12/12
- [Qemu-devel] [PATCH v4 10/11] pci/shpc: perform unplug via the hotplug handler, David Hildenbrand, 2018/12/12
- [Qemu-devel] [PATCH v4 11/11] spapr_pci: perform unplug via the hotplug handler, David Hildenbrand, 2018/12/12
- Re: [Qemu-devel] [PATCH v4 00/11] pci: hotplug handler reworks, David Hildenbrand, 2018/12/17