[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v5 1/6] fsdev-throttle-qmp: factor out throttle
From: |
xiezhide |
Subject: |
Re: [Qemu-devel] [PATCH v5 1/6] fsdev-throttle-qmp: factor out throttle code to reuse code |
Date: |
Fri, 23 Nov 2018 06:42:36 +0000 |
> -----Original Message-----
> From: Greg Kurz [mailto:address@hidden
> Sent: Thursday, November 22, 2018 10:46 PM
> To: xiezhide <address@hidden>
> Cc: address@hidden; address@hidden;
> address@hidden; address@hidden; address@hidden; zengcanfu
> 00215970 <address@hidden>; Jinxuefeng <address@hidden>;
> Chenhui (Felix, Euler) <address@hidden>
> Subject: Re: [PATCH v5 1/6] fsdev-throttle-qmp: factor out throttle code to
> reuse code
>
> On Fri, 16 Nov 2018 15:59:16 +0800
> xiezhide <address@hidden> wrote:
>
> > Factor out throttle parameter parsing code to a new common function
> > which will be used by block and fsdev.
> > Rename function throttle_parse_options to throttle_parse_group to
> > resolve function name conflict
> >
> > Reviewed-by: Eric Blake <address@hidden>
> > Signed-off-by: xiezhide <address@hidden>
> > ---
>
> Reviewed-by: Greg Kurz <address@hidden>
>
> And, since I guess this will likely go through someone else's tree, for the
> fsdev
> changes:
Yes,Pradeep Jagadeesh<address@hidden> had done some work for this, and I take
it over now
>
> Acked-by: Greg Kurz <address@hidden>
>
> > block/throttle.c | 6 ++--
> > blockdev.c | 43 +-------------------------
> > fsdev/qemu-fsdev-throttle.c | 44 ++------------------------
> > include/qemu/throttle-options.h | 2 ++
> > include/qemu/throttle.h | 4 +--
> > include/qemu/typedefs.h | 1 +
> > util/throttle.c | 68
> +++++++++++++++++++++++++++++++++++++++++
> > 7 files changed, 79 insertions(+), 89 deletions(-)
> >
> > diff --git a/block/throttle.c b/block/throttle.c index
> > 636c976..bd23c58 100644
> > --- a/block/throttle.c
> > +++ b/block/throttle.c
> > @@ -41,7 +41,7 @@ static QemuOptsList throttle_opts = {
> > * @group and must be freed by the caller.
> > * If there's an error then @group remains unmodified.
> > */
> > -static int throttle_parse_options(QDict *options, char **group, Error
> > **errp)
> > +static int throttle_parse_group(QDict *options, char **group, Error
> > +**errp)
> > {
> > int ret;
> > const char *group_name;
> > @@ -90,7 +90,7 @@ static int throttle_open(BlockDriverState *bs, QDict
> *options,
> > bs->supported_zero_flags = bs->file->bs->supported_zero_flags |
> > BDRV_REQ_WRITE_UNCHANGED;
> >
> > - ret = throttle_parse_options(options, &group, errp);
> > + ret = throttle_parse_group(options, &group, errp);
> > if (ret == 0) {
> > /* Register membership to group with name group_name */
> > throttle_group_register_tgm(tgm, group,
> > bdrv_get_aio_context(bs)); @@ -179,7 +179,7 @@ static int
> throttle_reopen_prepare(BDRVReopenState *reopen_state,
> > assert(reopen_state != NULL);
> > assert(reopen_state->bs != NULL);
> >
> > - ret = throttle_parse_options(reopen_state->options, &group, errp);
> > + ret = throttle_parse_group(reopen_state->options, &group, errp);
> > reopen_state->opaque = group;
> > return ret;
> > }
> > diff --git a/blockdev.c b/blockdev.c
> > index 81f95d9..fce5d8f 100644
> > --- a/blockdev.c
> > +++ b/blockdev.c
> > @@ -400,48 +400,7 @@ static void
> extract_common_blockdev_options(QemuOpts *opts, int *bdrv_flags,
> > }
> >
> > if (throttle_cfg) {
> > - throttle_config_init(throttle_cfg);
> > - throttle_cfg->buckets[THROTTLE_BPS_TOTAL].avg =
> > - qemu_opt_get_number(opts, "throttling.bps-total", 0);
> > - throttle_cfg->buckets[THROTTLE_BPS_READ].avg =
> > - qemu_opt_get_number(opts, "throttling.bps-read", 0);
> > - throttle_cfg->buckets[THROTTLE_BPS_WRITE].avg =
> > - qemu_opt_get_number(opts, "throttling.bps-write", 0);
> > - throttle_cfg->buckets[THROTTLE_OPS_TOTAL].avg =
> > - qemu_opt_get_number(opts, "throttling.iops-total", 0);
> > - throttle_cfg->buckets[THROTTLE_OPS_READ].avg =
> > - qemu_opt_get_number(opts, "throttling.iops-read", 0);
> > - throttle_cfg->buckets[THROTTLE_OPS_WRITE].avg =
> > - qemu_opt_get_number(opts, "throttling.iops-write", 0);
> > -
> > - throttle_cfg->buckets[THROTTLE_BPS_TOTAL].max =
> > - qemu_opt_get_number(opts, "throttling.bps-total-max", 0);
> > - throttle_cfg->buckets[THROTTLE_BPS_READ].max =
> > - qemu_opt_get_number(opts, "throttling.bps-read-max", 0);
> > - throttle_cfg->buckets[THROTTLE_BPS_WRITE].max =
> > - qemu_opt_get_number(opts, "throttling.bps-write-max", 0);
> > - throttle_cfg->buckets[THROTTLE_OPS_TOTAL].max =
> > - qemu_opt_get_number(opts, "throttling.iops-total-max", 0);
> > - throttle_cfg->buckets[THROTTLE_OPS_READ].max =
> > - qemu_opt_get_number(opts, "throttling.iops-read-max", 0);
> > - throttle_cfg->buckets[THROTTLE_OPS_WRITE].max =
> > - qemu_opt_get_number(opts, "throttling.iops-write-max", 0);
> > -
> > - throttle_cfg->buckets[THROTTLE_BPS_TOTAL].burst_length =
> > - qemu_opt_get_number(opts,
> "throttling.bps-total-max-length", 1);
> > - throttle_cfg->buckets[THROTTLE_BPS_READ].burst_length =
> > - qemu_opt_get_number(opts,
> "throttling.bps-read-max-length", 1);
> > - throttle_cfg->buckets[THROTTLE_BPS_WRITE].burst_length =
> > - qemu_opt_get_number(opts,
> "throttling.bps-write-max-length", 1);
> > - throttle_cfg->buckets[THROTTLE_OPS_TOTAL].burst_length =
> > - qemu_opt_get_number(opts,
> "throttling.iops-total-max-length", 1);
> > - throttle_cfg->buckets[THROTTLE_OPS_READ].burst_length =
> > - qemu_opt_get_number(opts,
> "throttling.iops-read-max-length", 1);
> > - throttle_cfg->buckets[THROTTLE_OPS_WRITE].burst_length =
> > - qemu_opt_get_number(opts,
> "throttling.iops-write-max-length", 1);
> > -
> > - throttle_cfg->op_size =
> > - qemu_opt_get_number(opts, "throttling.iops-size", 0);
> > + throttle_parse_options(throttle_cfg, opts);
> >
> > if (!throttle_is_valid(throttle_cfg, errp)) {
> > return;
> > diff --git a/fsdev/qemu-fsdev-throttle.c b/fsdev/qemu-fsdev-throttle.c
> > index cfd8641..6a4108a 100644
> > --- a/fsdev/qemu-fsdev-throttle.c
> > +++ b/fsdev/qemu-fsdev-throttle.c
> > @@ -17,6 +17,7 @@
> > #include "qemu-fsdev-throttle.h"
> > #include "qemu/iov.h"
> > #include "qemu/option.h"
> > +#include "qemu/throttle-options.h"
> >
> > static void fsdev_throttle_read_timer_cb(void *opaque) { @@ -32,48
> > +33,7 @@ static void fsdev_throttle_write_timer_cb(void *opaque)
> >
> > void fsdev_throttle_parse_opts(QemuOpts *opts, FsThrottle *fst, Error
> > **errp) {
> > - throttle_config_init(&fst->cfg);
> > - fst->cfg.buckets[THROTTLE_BPS_TOTAL].avg =
> > - qemu_opt_get_number(opts, "throttling.bps-total", 0);
> > - fst->cfg.buckets[THROTTLE_BPS_READ].avg =
> > - qemu_opt_get_number(opts, "throttling.bps-read", 0);
> > - fst->cfg.buckets[THROTTLE_BPS_WRITE].avg =
> > - qemu_opt_get_number(opts, "throttling.bps-write", 0);
> > - fst->cfg.buckets[THROTTLE_OPS_TOTAL].avg =
> > - qemu_opt_get_number(opts, "throttling.iops-total", 0);
> > - fst->cfg.buckets[THROTTLE_OPS_READ].avg =
> > - qemu_opt_get_number(opts, "throttling.iops-read", 0);
> > - fst->cfg.buckets[THROTTLE_OPS_WRITE].avg =
> > - qemu_opt_get_number(opts, "throttling.iops-write", 0);
> > -
> > - fst->cfg.buckets[THROTTLE_BPS_TOTAL].max =
> > - qemu_opt_get_number(opts, "throttling.bps-total-max", 0);
> > - fst->cfg.buckets[THROTTLE_BPS_READ].max =
> > - qemu_opt_get_number(opts, "throttling.bps-read-max", 0);
> > - fst->cfg.buckets[THROTTLE_BPS_WRITE].max =
> > - qemu_opt_get_number(opts, "throttling.bps-write-max", 0);
> > - fst->cfg.buckets[THROTTLE_OPS_TOTAL].max =
> > - qemu_opt_get_number(opts, "throttling.iops-total-max", 0);
> > - fst->cfg.buckets[THROTTLE_OPS_READ].max =
> > - qemu_opt_get_number(opts, "throttling.iops-read-max", 0);
> > - fst->cfg.buckets[THROTTLE_OPS_WRITE].max =
> > - qemu_opt_get_number(opts, "throttling.iops-write-max", 0);
> > -
> > - fst->cfg.buckets[THROTTLE_BPS_TOTAL].burst_length =
> > - qemu_opt_get_number(opts, "throttling.bps-total-max-length",
> 1);
> > - fst->cfg.buckets[THROTTLE_BPS_READ].burst_length =
> > - qemu_opt_get_number(opts, "throttling.bps-read-max-length",
> 1);
> > - fst->cfg.buckets[THROTTLE_BPS_WRITE].burst_length =
> > - qemu_opt_get_number(opts, "throttling.bps-write-max-length",
> 1);
> > - fst->cfg.buckets[THROTTLE_OPS_TOTAL].burst_length =
> > - qemu_opt_get_number(opts, "throttling.iops-total-max-length",
> 1);
> > - fst->cfg.buckets[THROTTLE_OPS_READ].burst_length =
> > - qemu_opt_get_number(opts, "throttling.iops-read-max-length",
> 1);
> > - fst->cfg.buckets[THROTTLE_OPS_WRITE].burst_length =
> > - qemu_opt_get_number(opts, "throttling.iops-write-max-length",
> 1);
> > - fst->cfg.op_size =
> > - qemu_opt_get_number(opts, "throttling.iops-size", 0);
> > -
> > + throttle_parse_options(&fst->cfg, opts);
> > throttle_is_valid(&fst->cfg, errp); }
> >
> > diff --git a/include/qemu/throttle-options.h
> > b/include/qemu/throttle-options.h index 3528a8f..944a08c 100644
> > --- a/include/qemu/throttle-options.h
> > +++ b/include/qemu/throttle-options.h
> > @@ -111,4 +111,6 @@
> > .help = "when limiting by iops max size of an I/O in bytes",\
> > }
> >
> > +void throttle_parse_options(ThrottleConfig *, QemuOpts *);
> > +
> > #endif
> > diff --git a/include/qemu/throttle.h b/include/qemu/throttle.h index
> > abeb886..f379d91 100644
> > --- a/include/qemu/throttle.h
> > +++ b/include/qemu/throttle.h
> > @@ -90,10 +90,10 @@ typedef struct LeakyBucket {
> > * However it allows to keep the code clean and the bucket field is reset
> > to
> > * zero at the right time.
> > */
> > -typedef struct ThrottleConfig {
> > +struct ThrottleConfig {
> > LeakyBucket buckets[BUCKETS_COUNT]; /* leaky buckets */
> > uint64_t op_size; /* size of an operation in bytes */
> > -} ThrottleConfig;
> > +};
> >
> > typedef struct ThrottleState {
> > ThrottleConfig cfg; /* configuration */
> > diff --git a/include/qemu/typedefs.h b/include/qemu/typedefs.h index
> > 3ec0e13..0d75edc 100644
> > --- a/include/qemu/typedefs.h
> > +++ b/include/qemu/typedefs.h
> > @@ -109,6 +109,7 @@ typedef struct SerialState SerialState; typedef
> > struct SHPCDevice SHPCDevice; typedef struct SMBusDevice SMBusDevice;
> > typedef struct SSIBus SSIBus;
> > +typedef struct ThrottleConfig ThrottleConfig;
> > typedef struct uWireSlave uWireSlave; typedef struct VirtIODevice
> > VirtIODevice; typedef struct Visitor Visitor; diff --git
> > a/util/throttle.c b/util/throttle.c index b38e742..e7db2ad 100644
> > --- a/util/throttle.c
> > +++ b/util/throttle.c
> > @@ -27,6 +27,8 @@
> > #include "qemu/throttle.h"
> > #include "qemu/timer.h"
> > #include "block/aio.h"
> > +#include "qemu/option.h"
> > +#include "qemu/throttle-options.h"
> >
> > /* This function make a bucket leak
> > *
> > @@ -636,3 +638,69 @@ void throttle_config_to_limits(ThrottleConfig *cfg,
> ThrottleLimits *var)
> > var->has_iops_write_max_length = true;
> > var->has_iops_size = true;
> > }
> > +
> > +/* parse the throttle options
> > + *
> > + * @opts: qemu options
> > + * @throttle_cfg: throttle configuration */ void
> > +throttle_parse_options(ThrottleConfig *throttle_cfg, QemuOpts *opts)
> > +{
> > + throttle_config_init(throttle_cfg);
> > + throttle_cfg->buckets[THROTTLE_BPS_TOTAL].avg =
> > + qemu_opt_get_number(opts, THROTTLE_OPT_PREFIX
> > + QEMU_OPT_BPS_TOTAL, 0);
> > + throttle_cfg->buckets[THROTTLE_BPS_READ].avg =
> > + qemu_opt_get_number(opts, THROTTLE_OPT_PREFIX
> > + QEMU_OPT_BPS_READ, 0);
> > + throttle_cfg->buckets[THROTTLE_BPS_WRITE].avg =
> > + qemu_opt_get_number(opts, THROTTLE_OPT_PREFIX
> > + QEMU_OPT_BPS_WRITE, 0);
> > + throttle_cfg->buckets[THROTTLE_OPS_TOTAL].avg =
> > + qemu_opt_get_number(opts, THROTTLE_OPT_PREFIX
> > + QEMU_OPT_IOPS_TOTAL, 0);
> > + throttle_cfg->buckets[THROTTLE_OPS_READ].avg =
> > + qemu_opt_get_number(opts, THROTTLE_OPT_PREFIX
> > + QEMU_OPT_IOPS_READ, 0);
> > + throttle_cfg->buckets[THROTTLE_OPS_WRITE].avg =
> > + qemu_opt_get_number(opts, THROTTLE_OPT_PREFIX
> > + QEMU_OPT_IOPS_WRITE, 0);
> > + throttle_cfg->buckets[THROTTLE_BPS_TOTAL].max =
> > + qemu_opt_get_number(opts, THROTTLE_OPT_PREFIX
> > + QEMU_OPT_BPS_TOTAL_MAX, 0);
> > + throttle_cfg->buckets[THROTTLE_BPS_READ].max =
> > + qemu_opt_get_number(opts, THROTTLE_OPT_PREFIX
> > + QEMU_OPT_BPS_READ_MAX, 0);
> > + throttle_cfg->buckets[THROTTLE_BPS_WRITE].max =
> > + qemu_opt_get_number(opts, THROTTLE_OPT_PREFIX
> > + QEMU_OPT_BPS_WRITE_MAX, 0);
> > + throttle_cfg->buckets[THROTTLE_OPS_TOTAL].max =
> > + qemu_opt_get_number(opts, THROTTLE_OPT_PREFIX
> > + QEMU_OPT_IOPS_TOTAL_MAX, 0);
> > + throttle_cfg->buckets[THROTTLE_OPS_READ].max =
> > + qemu_opt_get_number(opts, THROTTLE_OPT_PREFIX
> > + QEMU_OPT_IOPS_READ_MAX, 0);
> > + throttle_cfg->buckets[THROTTLE_OPS_WRITE].max =
> > + qemu_opt_get_number(opts, THROTTLE_OPT_PREFIX
> > + QEMU_OPT_IOPS_WRITE_MAX, 0);
> > + throttle_cfg->buckets[THROTTLE_BPS_TOTAL].burst_length =
> > + qemu_opt_get_number(opts, THROTTLE_OPT_PREFIX
> > + QEMU_OPT_BPS_TOTAL_MAX_LENGTH,
> 1);
> > + throttle_cfg->buckets[THROTTLE_BPS_READ].burst_length =
> > + qemu_opt_get_number(opts, THROTTLE_OPT_PREFIX
> > + QEMU_OPT_BPS_READ_MAX_LENGTH,
> 1);
> > + throttle_cfg->buckets[THROTTLE_BPS_WRITE].burst_length =
> > + qemu_opt_get_number(opts, THROTTLE_OPT_PREFIX
> > + QEMU_OPT_BPS_WRITE_MAX_LENGTH,
> 1);
> > + throttle_cfg->buckets[THROTTLE_OPS_TOTAL].burst_length =
> > + qemu_opt_get_number(opts, THROTTLE_OPT_PREFIX
> > + QEMU_OPT_IOPS_TOTAL_MAX_LENGTH,
> 1);
> > + throttle_cfg->buckets[THROTTLE_OPS_READ].burst_length =
> > + qemu_opt_get_number(opts, THROTTLE_OPT_PREFIX
> > + QEMU_OPT_IOPS_READ_MAX_LENGTH,
> 1);
> > + throttle_cfg->buckets[THROTTLE_OPS_WRITE].burst_length =
> > + qemu_opt_get_number(opts, THROTTLE_OPT_PREFIX
> > + QEMU_OPT_IOPS_WRITE_MAX_LENGTH,
> 1);
> > + throttle_cfg->op_size =
> > + qemu_opt_get_number(opts, THROTTLE_OPT_PREFIX
> > +QEMU_OPT_IOPS_SIZE, 0); }
[Qemu-devel] [PATCH v5 3/6] fsdev-throttle-qmp: Rewrite BlockIOThrottle with ThrottleLimits as its base class, xiezhide, 2018/11/16
[Qemu-devel] [PATCH v5 4/6] fsdev-throttle-qmp: Move ThrottleLimits into a new file for future reuse, xiezhide, 2018/11/16
[Qemu-devel] [PATCH v5 5/6] fsdev-throttle-qmp: qmp interface for fsdev io throttling, xiezhide, 2018/11/16