Re: [Qemu-devel] [PATCH v5 01/36] ppc/xive: introduce a XIVE interrupt source model

[David Gibson]

On Fri, Nov 16, 2018 at 11:56:54AM +0100, Cédric Le Goater wrote:
> The first sub-engine of the overall XIVE architecture is the Interrupt
> Virtualization Source Engine (IVSE). An IVSE can be integrated into
> another logic, like in a PCI PHB or in the main interrupt controller
> to manage IPIs.
> 
> Each IVSE instance is associated with an Event State Buffer (ESB) that
> contains a two bit state entry for each possible event source. When an
> event is signaled to the IVSE, by MMIO or some other means, the
> associated interrupt state bits are fetched from the ESB and
> modified. Depending on the resulting ESB state, the event is forwarded
> to the IVRE sub-engine of the controller doing the routing.
> 
> Each supported ESB entry is associated with either a single or a
> even/odd pair of pages which provides commands to manage the source:
> to EOI, to turn off the source for instance.
> 
> On a sPAPR machine, the O/S will obtain the page address of the ESB
> entry associated with a source and its characteristic using the
> H_INT_GET_SOURCE_INFO hcall. On PowerNV, a similar OPAL call is used.
> 
> The xive_source_notify() routine is in charge forwarding the source
> event notification to the routing engine. It will be filled later on.
> 
> Signed-off-by: Cédric Le Goater <address@hidden>

Ok, this is looking basically pretty good.  Few details to query
below.


> ---
>  default-configs/ppc64-softmmu.mak |   1 +
>  include/hw/ppc/xive.h             | 130 ++++++++++
>  hw/intc/xive.c                    | 379 ++++++++++++++++++++++++++++++
>  hw/intc/Makefile.objs             |   1 +
>  4 files changed, 511 insertions(+)
>  create mode 100644 include/hw/ppc/xive.h
>  create mode 100644 hw/intc/xive.c
> 
> diff --git a/default-configs/ppc64-softmmu.mak 
> b/default-configs/ppc64-softmmu.mak
> index aec2855750d6..2d1e7c5c4668 100644
> --- a/default-configs/ppc64-softmmu.mak
> +++ b/default-configs/ppc64-softmmu.mak
> @@ -16,6 +16,7 @@ CONFIG_VIRTIO_VGA=y
>  CONFIG_XICS=$(CONFIG_PSERIES)
>  CONFIG_XICS_SPAPR=$(CONFIG_PSERIES)
>  CONFIG_XICS_KVM=$(call land,$(CONFIG_PSERIES),$(CONFIG_KVM))
> +CONFIG_XIVE=$(CONFIG_PSERIES)
>  CONFIG_MEM_DEVICE=y
>  CONFIG_DIMM=y
>  CONFIG_SPAPR_RNG=y
> diff --git a/include/hw/ppc/xive.h b/include/hw/ppc/xive.h
> new file mode 100644
> index 000000000000..5fec4b08705d
> --- /dev/null
> +++ b/include/hw/ppc/xive.h
> @@ -0,0 +1,130 @@
> +/*
> + * QEMU PowerPC XIVE interrupt controller model
> + *
> + * Copyright (c) 2017-2018, IBM Corporation.
> + *
> + * This code is licensed under the GPL version 2 or later. See the
> + * COPYING file in the top-level directory.

A cheat sheet in the top of this header with the old and new XIVE
terms would quite nice to have.

> + */
> +
> +#ifndef PPC_XIVE_H
> +#define PPC_XIVE_H
> +
> +#include "hw/sysbus.h"

So, I'm a bit dubious about making the XiveSource a SysBus device -
I'm concerned it won't play well with tying it into the other devices
like PHB that "own" it in real hardware.

I think we'd be better off making it a direct descendent of
TYPE_DEVICE which constructs the MMIO region, but doesn't map it.
Then we can havea SysBusDevice (and/or other) wrapper which
instantiates the XiveSource core and maps it into somewhere
accessible.

> +
> +/*
> + * XIVE Interrupt Source
> + */
> +
> +#define TYPE_XIVE_SOURCE "xive-source"
> +#define XIVE_SOURCE(obj) OBJECT_CHECK(XiveSource, (obj), TYPE_XIVE_SOURCE)
> +
> +/*
> + * XIVE Interrupt Source characteristics, which define how the ESB are
> + * controlled.
> + */
> +#define XIVE_SRC_H_INT_ESB     0x1 /* ESB managed with hcall H_INT_ESB */
> +#define XIVE_SRC_STORE_EOI     0x2 /* Store EOI supported */
> +
> +typedef struct XiveSource {
> +    SysBusDevice parent;
> +
> +    /* IRQs */
> +    uint32_t        nr_irqs;
> +    qemu_irq        *qirqs;
> +
> +    /* PQ bits */
> +    uint8_t         *status;
> +
> +    /* ESB memory region */
> +    uint64_t        esb_flags;
> +    uint32_t        esb_shift;
> +    MemoryRegion    esb_mmio;
> +} XiveSource;
> +
> +/*
> + * ESB MMIO setting. Can be one page, for both source triggering and
> + * source management, or two different pages. See below for magic
> + * values.
> + */
> +#define XIVE_ESB_4K          12 /* PSI HB only */
> +#define XIVE_ESB_4K_2PAGE    13
> +#define XIVE_ESB_64K         16
> +#define XIVE_ESB_64K_2PAGE   17
> +
> +static inline bool xive_source_esb_has_2page(XiveSource *xsrc)
> +{
> +    return xsrc->esb_shift == XIVE_ESB_64K_2PAGE ||
> +        xsrc->esb_shift == XIVE_ESB_4K_2PAGE;
> +}
> +
> +/* The trigger page is always the first/even page */
> +static inline hwaddr xive_source_esb_page(XiveSource *xsrc, uint32_t srcno)

This function doesn't appear to be used anywhere except..

> +{
> +    assert(srcno < xsrc->nr_irqs);
> +    return (1ull << xsrc->esb_shift) * srcno;
> +}
> +
> +/* In a two pages ESB MMIO setting, the odd page is for management */
> +static inline hwaddr xive_source_esb_mgmt(XiveSource *xsrc, int srcno)


..here, and this function doesn't appear to be used anywhere.

> +{
> +    hwaddr addr = xive_source_esb_page(xsrc, srcno);
> +
> +    if (xive_source_esb_has_2page(xsrc)) {
> +        addr += (1 << (xsrc->esb_shift - 1));
> +    }
> +
> +    return addr;
> +}
> +
> +/*
> + * Each interrupt source has a 2-bit state machine which can be
> + * controlled by MMIO. P indicates that an interrupt is pending (has
> + * been sent to a queue and is waiting for an EOI). Q indicates that
> + * the interrupt has been triggered while pending.
> + *
> + * This acts as a coalescing mechanism in order to guarantee that a
> + * given interrupt only occurs at most once in a queue.
> + *
> + * When doing an EOI, the Q bit will indicate if the interrupt
> + * needs to be re-triggered.
> + */
> +#define XIVE_ESB_VAL_P        0x2
> +#define XIVE_ESB_VAL_Q        0x1
> +
> +#define XIVE_ESB_RESET        0x0
> +#define XIVE_ESB_PENDING      XIVE_ESB_VAL_P
> +#define XIVE_ESB_QUEUED       (XIVE_ESB_VAL_P | XIVE_ESB_VAL_Q)
> +#define XIVE_ESB_OFF          XIVE_ESB_VAL_Q
> +
> +/*
> + * "magic" Event State Buffer (ESB) MMIO offsets.
> + *
> + * The following offsets into the ESB MMIO allow to read or manipulate
> + * the PQ bits. They must be used with an 8-byte load instruction.
> + * They all return the previous state of the interrupt (atomically).
> + *
> + * Additionally, some ESB pages support doing an EOI via a store and
> + * some ESBs support doing a trigger via a separate trigger page.
> + */
> +#define XIVE_ESB_STORE_EOI      0x400 /* Store */
> +#define XIVE_ESB_LOAD_EOI       0x000 /* Load */
> +#define XIVE_ESB_GET            0x800 /* Load */
> +#define XIVE_ESB_SET_PQ_00      0xc00 /* Load */
> +#define XIVE_ESB_SET_PQ_01      0xd00 /* Load */
> +#define XIVE_ESB_SET_PQ_10      0xe00 /* Load */
> +#define XIVE_ESB_SET_PQ_11      0xf00 /* Load */
> +
> +uint8_t xive_source_esb_get(XiveSource *xsrc, uint32_t srcno);
> +uint8_t xive_source_esb_set(XiveSource *xsrc, uint32_t srcno, uint8_t pq);
> +
> +void xive_source_pic_print_info(XiveSource *xsrc, uint32_t offset,
> +                                Monitor *mon);
> +
> +static inline qemu_irq xive_source_qirq(XiveSource *xsrc, uint32_t srcno)
> +{
> +    assert(srcno < xsrc->nr_irqs);
> +    return xsrc->qirqs[srcno];
> +}
> +
> +#endif /* PPC_XIVE_H */
> diff --git a/hw/intc/xive.c b/hw/intc/xive.c
> new file mode 100644
> index 000000000000..f7621f84828c
> --- /dev/null
> +++ b/hw/intc/xive.c
> @@ -0,0 +1,379 @@
> +/*
> + * QEMU PowerPC XIVE interrupt controller model
> + *
> + * Copyright (c) 2017-2018, IBM Corporation.
> + *
> + * This code is licensed under the GPL version 2 or later. See the
> + * COPYING file in the top-level directory.
> + */
> +
> +#include "qemu/osdep.h"
> +#include "qemu/log.h"
> +#include "qapi/error.h"
> +#include "target/ppc/cpu.h"
> +#include "sysemu/cpus.h"
> +#include "sysemu/dma.h"
> +#include "monitor/monitor.h"
> +#include "hw/ppc/xive.h"
> +
> +/*
> + * XIVE ESB helpers
> + */
> +
> +static uint8_t xive_esb_set(uint8_t *pq, uint8_t value)
> +{
> +    uint8_t old_pq = *pq & 0x3;
> +
> +    *pq &= ~0x3;
> +    *pq |= value & 0x3;
> +
> +    return old_pq;
> +}
> +
> +static bool xive_esb_trigger(uint8_t *pq)
> +{
> +    uint8_t old_pq = *pq & 0x3;
> +
> +    switch (old_pq) {
> +    case XIVE_ESB_RESET:
> +        xive_esb_set(pq, XIVE_ESB_PENDING);
> +        return true;
> +    case XIVE_ESB_PENDING:
> +    case XIVE_ESB_QUEUED:
> +        xive_esb_set(pq, XIVE_ESB_QUEUED);
> +        return false;
> +    case XIVE_ESB_OFF:
> +        xive_esb_set(pq, XIVE_ESB_OFF);
> +        return false;
> +    default:
> +         g_assert_not_reached();
> +    }
> +}
> +
> +static bool xive_esb_eoi(uint8_t *pq)
> +{
> +    uint8_t old_pq = *pq & 0x3;
> +
> +    switch (old_pq) {
> +    case XIVE_ESB_RESET:
> +    case XIVE_ESB_PENDING:
> +        xive_esb_set(pq, XIVE_ESB_RESET);
> +        return false;
> +    case XIVE_ESB_QUEUED:
> +        xive_esb_set(pq, XIVE_ESB_PENDING);
> +        return true;
> +    case XIVE_ESB_OFF:
> +        xive_esb_set(pq, XIVE_ESB_OFF);
> +        return false;
> +    default:
> +         g_assert_not_reached();
> +    }
> +}
> +
> +/*
> + * XIVE Interrupt Source (or IVSE)
> + */
> +
> +uint8_t xive_source_esb_get(XiveSource *xsrc, uint32_t srcno)
> +{
> +    assert(srcno < xsrc->nr_irqs);
> +
> +    return xsrc->status[srcno] & 0x3;
> +}
> +
> +uint8_t xive_source_esb_set(XiveSource *xsrc, uint32_t srcno, uint8_t pq)
> +{
> +    assert(srcno < xsrc->nr_irqs);
> +
> +    return xive_esb_set(&xsrc->status[srcno], pq);
> +}
> +
> +/*
> + * Returns whether the event notification should be forwarded.
> + */
> +static bool xive_source_esb_trigger(XiveSource *xsrc, uint32_t srcno)
> +{
> +    assert(srcno < xsrc->nr_irqs);
> +
> +    return xive_esb_trigger(&xsrc->status[srcno]);
> +}
> +
> +/*
> + * Returns whether the event notification should be forwarded.
> + */
> +static bool xive_source_esb_eoi(XiveSource *xsrc, uint32_t srcno)
> +{
> +    assert(srcno < xsrc->nr_irqs);
> +
> +    return xive_esb_eoi(&xsrc->status[srcno]);
> +}
> +
> +/*
> + * Forward the source event notification to the Router
> + */
> +static void xive_source_notify(XiveSource *xsrc, int srcno)
> +{
> +
> +}
> +
> +/*
> + * In a two pages ESB MMIO setting, even page is the trigger page, odd
> + * page is for management
> + */
> +static inline bool addr_is_even(hwaddr addr, uint32_t shift)
> +{
> +    return !((addr >> shift) & 1);
> +}
> +
> +static inline bool xive_source_is_trigger_page(XiveSource *xsrc, hwaddr addr)
> +{
> +    return xive_source_esb_has_2page(xsrc) &&
> +        addr_is_even(addr, xsrc->esb_shift - 1);
> +}
> +
> +/*
> + * ESB MMIO loads
> + *                      Trigger page    Management/EOI page
> + * 2 pages setting      even            odd
> + *
> + * 0x000 .. 0x3FF       -1              EOI and return 0|1
> + * 0x400 .. 0x7FF       -1              EOI and return 0|1
> + * 0x800 .. 0xBFF       -1              return PQ
> + * 0xC00 .. 0xCFF       -1              return PQ and atomically PQ=0
> + * 0xD00 .. 0xDFF       -1              return PQ and atomically PQ=0
> + * 0xE00 .. 0xDFF       -1              return PQ and atomically PQ=1
> + * 0xF00 .. 0xDFF       -1              return PQ and atomically PQ=1
> + */

I can't quite make sense of this table.  What do the -1s represent,
and how does it relate to the non-2page case?

> +static uint64_t xive_source_esb_read(void *opaque, hwaddr addr, unsigned 
> size)
> +{
> +    XiveSource *xsrc = XIVE_SOURCE(opaque);
> +    uint32_t offset = addr & 0xFFF;
> +    uint32_t srcno = addr >> xsrc->esb_shift;
> +    uint64_t ret = -1;
> +
> +    /* In a two pages ESB MMIO setting, trigger page should not be read */
> +    if (xive_source_is_trigger_page(xsrc, addr)) {
> +        qemu_log_mask(LOG_GUEST_ERROR,
> +                      "XIVE: invalid load on IRQ %d trigger page at "
> +                      "0x%"HWADDR_PRIx"\n", srcno, addr);
> +        return -1;
> +    }
> +
> +    switch (offset) {
> +    case XIVE_ESB_LOAD_EOI ... XIVE_ESB_LOAD_EOI + 0x7FF:
> +        ret = xive_source_esb_eoi(xsrc, srcno);
> +
> +        /* Forward the source event notification for routing */
> +        if (ret) {
> +            xive_source_notify(xsrc, srcno);
> +        }
> +        break;
> +
> +    case XIVE_ESB_GET ... XIVE_ESB_GET + 0x3FF:
> +        ret = xive_source_esb_get(xsrc, srcno);
> +        break;
> +
> +    case XIVE_ESB_SET_PQ_00 ... XIVE_ESB_SET_PQ_00 + 0x0FF:
> +    case XIVE_ESB_SET_PQ_01 ... XIVE_ESB_SET_PQ_01 + 0x0FF:
> +    case XIVE_ESB_SET_PQ_10 ... XIVE_ESB_SET_PQ_10 + 0x0FF:
> +    case XIVE_ESB_SET_PQ_11 ... XIVE_ESB_SET_PQ_11 + 0x0FF:
> +        ret = xive_source_esb_set(xsrc, srcno, (offset >> 8) & 0x3);
> +        break;
> +    default:
> +        qemu_log_mask(LOG_GUEST_ERROR, "XIVE: invalid ESB load addr %x\n",
> +                      offset);
> +    }
> +
> +    return ret;
> +}
> +
> +/*
> + * ESB MMIO stores
> + *                      Trigger page    Management/EOI page
> + * 2 pages setting      even            odd

As with the previous table, I don't quite understand what the headings
above mean.

> + * 0x000 .. 0x3FF       Trigger         Trigger
> + * 0x400 .. 0x7FF       Trigger         EOI
> + * 0x800 .. 0xBFF       Trigger         undefined
> + * 0xC00 .. 0xCFF       Trigger         PQ=00
> + * 0xD00 .. 0xDFF       Trigger         PQ=01
> + * 0xE00 .. 0xDFF       Trigger         PQ=10
> + * 0xF00 .. 0xDFF       Trigger         PQ=11
> + */
> +static void xive_source_esb_write(void *opaque, hwaddr addr,
> +                                  uint64_t value, unsigned size)
> +{
> +    XiveSource *xsrc = XIVE_SOURCE(opaque);
> +    uint32_t offset = addr & 0xFFF;
> +    uint32_t srcno = addr >> xsrc->esb_shift;
> +    bool notify = false;
> +
> +    /* In a two pages ESB MMIO setting, trigger page only triggers */
> +    if (xive_source_is_trigger_page(xsrc, addr)) {
> +        notify = xive_source_esb_trigger(xsrc, srcno);
> +        goto out;
> +    }
> +
> +    switch (offset) {
> +    case 0 ... 0x3FF:
> +        notify = xive_source_esb_trigger(xsrc, srcno);
> +        break;
> +
> +    case XIVE_ESB_STORE_EOI ... XIVE_ESB_STORE_EOI + 0x3FF:
> +        if (!(xsrc->esb_flags & XIVE_SRC_STORE_EOI)) {
> +            qemu_log_mask(LOG_GUEST_ERROR,
> +                          "XIVE: invalid Store EOI for IRQ %d\n", srcno);
> +            return;
> +        }
> +
> +        notify = xive_source_esb_eoi(xsrc, srcno);
> +        break;
> +
> +    case XIVE_ESB_SET_PQ_00 ... XIVE_ESB_SET_PQ_00 + 0x0FF:
> +    case XIVE_ESB_SET_PQ_01 ... XIVE_ESB_SET_PQ_01 + 0x0FF:
> +    case XIVE_ESB_SET_PQ_10 ... XIVE_ESB_SET_PQ_10 + 0x0FF:
> +    case XIVE_ESB_SET_PQ_11 ... XIVE_ESB_SET_PQ_11 + 0x0FF:
> +        xive_source_esb_set(xsrc, srcno, (offset >> 8) & 0x3);
> +        break;
> +
> +    default:
> +        qemu_log_mask(LOG_GUEST_ERROR, "XIVE: invalid ESB write addr %x\n",
> +                      offset);
> +        return;
> +    }
> +
> +out:
> +    /* Forward the source event notification for routing */
> +    if (notify) {
> +        xive_source_notify(xsrc, srcno);
> +    }
> +}
> +
> +static const MemoryRegionOps xive_source_esb_ops = {
> +    .read = xive_source_esb_read,
> +    .write = xive_source_esb_write,
> +    .endianness = DEVICE_BIG_ENDIAN,
> +    .valid = {
> +        .min_access_size = 8,
> +        .max_access_size = 8,
> +    },
> +    .impl = {
> +        .min_access_size = 8,
> +        .max_access_size = 8,
> +    },
> +};
> +
> +static void xive_source_set_irq(void *opaque, int srcno, int val)
> +{
> +    XiveSource *xsrc = XIVE_SOURCE(opaque);
> +    bool notify = false;
> +
> +    if (val) {
> +        notify = xive_source_esb_trigger(xsrc, srcno);
> +    }
> +
> +    /* Forward the source event notification for routing */
> +    if (notify) {
> +        xive_source_notify(xsrc, srcno);
> +    }
> +}
> +
> +void xive_source_pic_print_info(XiveSource *xsrc, uint32_t offset, Monitor 
> *mon)
> +{
> +    int i;
> +
> +    for (i = 0; i < xsrc->nr_irqs; i++) {
> +        uint8_t pq = xive_source_esb_get(xsrc, i);
> +
> +        if (pq == XIVE_ESB_OFF) {
> +            continue;
> +        }
> +
> +        monitor_printf(mon, "  %08x %c%c\n", i + offset,
> +                       pq & XIVE_ESB_VAL_P ? 'P' : '-',
> +                       pq & XIVE_ESB_VAL_Q ? 'Q' : '-');
> +    }
> +}
> +
> +static void xive_source_reset(DeviceState *dev)
> +{
> +    XiveSource *xsrc = XIVE_SOURCE(dev);
> +
> +    /* PQs are initialized to 0b01 which corresponds to "ints off" */
> +    memset(xsrc->status, 0x1, xsrc->nr_irqs);

You've already got XIVE_ESB_OFF defined to make this a little clearer.

> +}
> +
> +static void xive_source_realize(DeviceState *dev, Error **errp)
> +{
> +    XiveSource *xsrc = XIVE_SOURCE(dev);
> +
> +    if (!xsrc->nr_irqs) {
> +        error_setg(errp, "Number of interrupt needs to be greater than 0");
> +        return;
> +    }
> +
> +    if (xsrc->esb_shift != XIVE_ESB_4K &&
> +        xsrc->esb_shift != XIVE_ESB_4K_2PAGE &&
> +        xsrc->esb_shift != XIVE_ESB_64K &&
> +        xsrc->esb_shift != XIVE_ESB_64K_2PAGE) {
> +        error_setg(errp, "Invalid ESB shift setting");
> +        return;
> +    }
> +
> +    xsrc->qirqs = qemu_allocate_irqs(xive_source_set_irq, xsrc,
> +                                     xsrc->nr_irqs);
> +
> +    xsrc->status = g_malloc0(xsrc->nr_irqs);
> +
> +    memory_region_init_io(&xsrc->esb_mmio, OBJECT(xsrc),
> +                          &xive_source_esb_ops, xsrc, "xive.esb",
> +                          (1ull << xsrc->esb_shift) * xsrc->nr_irqs);
> +    sysbus_init_mmio(SYS_BUS_DEVICE(dev), &xsrc->esb_mmio);
> +}
> +
> +static const VMStateDescription vmstate_xive_source = {
> +    .name = TYPE_XIVE_SOURCE,
> +    .version_id = 1,
> +    .minimum_version_id = 1,
> +    .fields = (VMStateField[]) {
> +        VMSTATE_UINT32_EQUAL(nr_irqs, XiveSource, NULL),
> +        VMSTATE_VBUFFER_UINT32(status, XiveSource, 1, NULL, nr_irqs),
> +        VMSTATE_END_OF_LIST()
> +    },
> +};
> +
> +/*
> + * The default XIVE interrupt source setting for the ESB MMIOs is two
> + * 64k pages without Store EOI, to be in sync with KVM.
> + */
> +static Property xive_source_properties[] = {
> +    DEFINE_PROP_UINT64("flags", XiveSource, esb_flags, 0),
> +    DEFINE_PROP_UINT32("nr-irqs", XiveSource, nr_irqs, 0),
> +    DEFINE_PROP_UINT32("shift", XiveSource, esb_shift, XIVE_ESB_64K_2PAGE),
> +    DEFINE_PROP_END_OF_LIST(),
> +};
> +
> +static void xive_source_class_init(ObjectClass *klass, void *data)
> +{
> +    DeviceClass *dc = DEVICE_CLASS(klass);
> +
> +    dc->desc    = "XIVE Interrupt Source";
> +    dc->props   = xive_source_properties;
> +    dc->realize = xive_source_realize;
> +    dc->reset   = xive_source_reset;
> +    dc->vmsd    = &vmstate_xive_source;
> +}
> +
> +static const TypeInfo xive_source_info = {
> +    .name          = TYPE_XIVE_SOURCE,
> +    .parent        = TYPE_SYS_BUS_DEVICE,
> +    .instance_size = sizeof(XiveSource),
> +    .class_init    = xive_source_class_init,
> +};
> +
> +static void xive_register_types(void)
> +{
> +    type_register_static(&xive_source_info);
> +}
> +
> +type_init(xive_register_types)
> diff --git a/hw/intc/Makefile.objs b/hw/intc/Makefile.objs
> index 0e9963f5eecc..72a46ed91c31 100644
> --- a/hw/intc/Makefile.objs
> +++ b/hw/intc/Makefile.objs
> @@ -37,6 +37,7 @@ obj-$(CONFIG_SH4) += sh_intc.o
>  obj-$(CONFIG_XICS) += xics.o
>  obj-$(CONFIG_XICS_SPAPR) += xics_spapr.o
>  obj-$(CONFIG_XICS_KVM) += xics_kvm.o
> +obj-$(CONFIG_XIVE) += xive.o
>  obj-$(CONFIG_POWERNV) += xics_pnv.o
>  obj-$(CONFIG_ALLWINNER_A10_PIC) += allwinner-a10-pic.o
>  obj-$(CONFIG_S390_FLIC) += s390_flic.o

-- 
David Gibson                    | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au  | minimalist, thank you.  NOT _the_ _other_
                                | _way_ _around_!
http://www.ozlabs.org/~dgibson

signature.asc
Description: PGP signature