qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [PATCH v6 10/11] authz: add QAuthZPAM object type for a


From: Marc-André Lureau
Subject: Re: [Qemu-devel] [PATCH v6 10/11] authz: add QAuthZPAM object type for authorizing using PAM
Date: Thu, 8 Nov 2018 02:23:18 +0400

Hi

On Fri, Oct 19, 2018 at 5:47 PM Daniel P. Berrangé <address@hidden> wrote:
>
> From: "Daniel P. Berrange" <address@hidden>
>
> Add an authorization backend that talks to PAM to check whether the user
> identity is allowed. This only uses the PAM account validation facility,
> which is essentially just a check to see if the provided username is permitted
> access. It doesn't use the authentication or session parts of PAM, since
> that's dealt with by the relevant part of QEMU (eg VNC server).
>
> Consider starting QEMU with a VNC server and telling it to use TLS with
> x509 client certificates and configuring it to use an PAM to validate
> the x509 distinguished name. In this example we're telling it to use PAM
> for the QAuthZ impl with a service name of "qemu-vnc"
>
>  $ qemu-system-x86_64 \
>      -object tls-creds-x509,id=tls0,dir=/home/berrange/security/qemutls,\
>              endpoint=server,verify-peer=yes \
>      -object authz-pam,id=authz0,service=qemu-vnc \
>      -vnc :1,tls-creds=tls0,tls-authz=authz0
>
> This requires an /etc/pam/qemu-vnc file to be created with the auth
> rules. A very simple file based whitelist can be setup using
>
>   $ cat > /etc/pam/qemu-vnc <<EOF
>   account         requisite       pam_listfile.so item=user sense=allow 
> file=/etc/qemu/vnc.allow
>   EOF
>
> The /etc/qemu/vnc.allow file simply contains one username per line. Any
> username not in the file is denied. The usernames in this example are
> the x509 distinguished name from the client's x509 cert.
>
>   $ cat > /etc/qemu/vnc.allow <<EOF
>   CN=laptop.berrange.com,O=Berrange Home,L=London,ST=London,C=GB
>   EOF
>
> More interesting would be to configure PAM to use an LDAP backend, so
> that the QEMU authorization check data can be centralized instead of
> requiring each compute host to have file maintained.
>
> The main limitation with this PAM module is that the rules apply to all
> QEMU instances on the host. Setting up different rules per VM, would
> require creating a separate PAM service name & config file for every
> guest. An alternative approach for the future might be to not pass in
> the plain username to PAM, but instead combine the VM name or UUID with
> the username. This requires further consideration though.
>
> Reviewed-by: Philippe Mathieu-Daudé <address@hidden>
> Tested-by: Philippe Mathieu-Daudé <address@hidden>
> Signed-off-by: Daniel P. Berrange <address@hidden>
> ---
>  configure               |  37 ++++++++++
>  include/authz/pamacct.h | 100 +++++++++++++++++++++++++++
>  authz/pamacct.c         | 149 ++++++++++++++++++++++++++++++++++++++++
>  authz/Makefile.objs     |   3 +
>  authz/trace-events      |   3 +
>  qemu-options.hx         |  35 ++++++++++
>  6 files changed, 327 insertions(+)
>  create mode 100644 include/authz/pamacct.h
>  create mode 100644 authz/pamacct.c
>
> diff --git a/configure b/configure
> index 9138af37f8..db35d52e12 100755
> --- a/configure
> +++ b/configure
> @@ -463,6 +463,7 @@ nettle_kdf="no"
>  gcrypt=""
>  gcrypt_hmac="no"
>  gcrypt_kdf="no"
> +auth_pam=""
>  vte=""
>  virglrenderer=""
>  tpm="yes"
> @@ -1361,6 +1362,10 @@ for opt do
>    ;;
>    --enable-gcrypt) gcrypt="yes"
>    ;;
> +  --disable-auth-pam) auth_pam="no"
> +  ;;
> +  --enable-auth-pam) auth_pam="yes"
> +  ;;
>    --enable-rdma) rdma="yes"
>    ;;
>    --disable-rdma) rdma="no"
> @@ -1653,6 +1658,7 @@ disabled with --disable-FEATURE, default is enabled if 
> available:
>    gnutls          GNUTLS cryptography support
>    nettle          nettle cryptography support
>    gcrypt          libgcrypt cryptography support
> +  auth-pam        PAM access control
>    sdl             SDL UI
>    --with-sdlabi     select preferred SDL ABI 1.2 or 2.0
>    gtk             gtk UI
> @@ -2876,6 +2882,33 @@ else
>  fi
>
>
> +##########################################
> +# PAM probe
> +
> +if test "x$auth_pam" != "no"; then
> +    cat > $TMPC <<EOF
> +#include <security/pam_appl.h>
> +#include <stdio.h>
> +int main(void) {
> +   const char *service_name = "qemu";
> +   const char *user = "frank";
> +   const struct pam_conv *pam_conv = NULL;
> +   pam_handle_t *pamh = NULL;
> +   pam_start(service_name, user, pam_conv, &pamh);
> +   return 0;
> +}
> +EOF
> +    if compile_prog "" "-lpam" ; then
> +       auth_pam=yes
> +    else
> +       if test "$auth_pam" = "yes"; then
> +           feature_not_found "PAM" "Install PAM development package"
> +       else
> +           auth_pam=no
> +       fi
> +    fi
> +fi
> +
>  ##########################################
>  # getifaddrs (for tests/test-io-channel-socket )
>
> @@ -5967,6 +6000,7 @@ echo "libgcrypt kdf     $gcrypt_kdf"
>  echo "nettle            $nettle $(echo_version $nettle $nettle_version)"
>  echo "nettle kdf        $nettle_kdf"
>  echo "libtasn1          $tasn1"
> +echo "PAM               $auth_pam"
>  echo "curses support    $curses"
>  echo "virgl support     $virglrenderer $(echo_version $virglrenderer 
> $virgl_version)"
>  echo "curl support      $curl"
> @@ -6423,6 +6457,9 @@ fi
>  if test "$tasn1" = "yes" ; then
>    echo "CONFIG_TASN1=y" >> $config_host_mak
>  fi
> +if test "$auth_pam" = "yes" ; then
> +    echo "CONFIG_AUTH_PAM=y" >> $config_host_mak
> +fi
>  if test "$have_ifaddrs_h" = "yes" ; then
>      echo "HAVE_IFADDRS_H=y" >> $config_host_mak
>  fi
> diff --git a/include/authz/pamacct.h b/include/authz/pamacct.h
> new file mode 100644
> index 0000000000..d2c0149153
> --- /dev/null
> +++ b/include/authz/pamacct.h
> @@ -0,0 +1,100 @@
> +/*
> + * QEMU PAM authorization driver
> + *
> + * Copyright (c) 2018 Red Hat, Inc.
> + *
> + * This library is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU Lesser General Public
> + * License as published by the Free Software Foundation; either
> + * version 2 of the License, or (at your option) any later version.
> + *
> + * This library is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
> + * Lesser General Public License for more details.
> + *
> + * You should have received a copy of the GNU Lesser General Public
> + * License along with this library; if not, see 
> <http://www.gnu.org/licenses/>.
> + *
> + */
> +
> +#ifndef QAUTHZ_PAM_H__
> +#define QAUTHZ_PAM_H__
> +
> +#include "authz/base.h"
> +
> +
> +#define TYPE_QAUTHZ_PAM "authz-pam"
> +
> +#define QAUTHZ_PAM_CLASS(klass) \
> +     OBJECT_CLASS_CHECK(QAuthZPamClass, (klass), \
> +                        TYPE_QAUTHZ_PAM)
> +#define QAUTHZ_PAM_GET_CLASS(obj) \
> +     OBJECT_GET_CLASS(QAuthZPamClass, (obj), \
> +                      TYPE_QAUTHZ_PAM)
> +#define QAUTHZ_PAM(obj) \
> +     INTERFACE_CHECK(QAuthZPam, (obj), \
> +                     TYPE_QAUTHZ_PAM)
> +
> +typedef struct QAuthZPam QAuthZPam;
> +typedef struct QAuthZPamClass QAuthZPamClass;
> +
> +
> +/**
> + * QAuthZPam:
> + *
> + * This authorization driver provides a PAM mechanism
> + * for granting access by matching user names against a
> + * list of globs. Each match rule has an associated policy
> + * and a catch all policy applies if no rule matches
> + *
> + * To create an instance of this class via QMP:
> + *
> + *  {
> + *    "execute": "object-add",
> + *    "arguments": {
> + *      "qom-type": "authz-pam",
> + *      "id": "authz0",
> + *      "parameters": {
> + *        "service": "qemu-vnc-tls"
> + *      }
> + *    }
> + *  }
> + *
> + * The driver only uses the PAM "account" verification
> + * subsystem. The above config would require a config
> + * file /etc/pam.d/qemu-vnc-tls. For a simple file
> + * lookup it would contain
> + *
> + *   account requisite  pam_listfile.so item=user sense=allow \
> + *           file=/etc/qemu/vnc.allow
> + *
> + * The external file would then contain a list of usernames.
> + * If x509 cert was being used as the username, a suitable
> + * entry would match the distinguish name:
> + *
> + *  CN=laptop.berrange.com,O=Berrange Home,L=London,ST=London,C=GB
> + *
> + * On the command line it can be created using
> + *
> + *   -object authz-pam,id=authz0,service=qemu-vnc-tls
> + *
> + */
> +struct QAuthZPam {
> +    QAuthZ parent_obj;
> +
> +    char *service;
> +};
> +
> +
> +struct QAuthZPamClass {
> +    QAuthZClass parent_class;
> +};
> +
> +
> +QAuthZPam *qauthz_pam_new(const char *id,
> +                          const char *service,
> +                          Error **errp);
> +
> +
> +#endif /* QAUTHZ_PAM_H__ */
> diff --git a/authz/pamacct.c b/authz/pamacct.c
> new file mode 100644
> index 0000000000..a070dda217
> --- /dev/null
> +++ b/authz/pamacct.c
> @@ -0,0 +1,149 @@
> +/*
> + * QEMU PAM authorization driver
> + *
> + * Copyright (c) 2018 Red Hat, Inc.
> + *
> + * This library is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU Lesser General Public
> + * License as published by the Free Software Foundation; either
> + * version 2 of the License, or (at your option) any later version.
> + *
> + * This library is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
> + * Lesser General Public License for more details.
> + *
> + * You should have received a copy of the GNU Lesser General Public
> + * License along with this library; if not, see 
> <http://www.gnu.org/licenses/>.
> + *
> + */
> +
> +#include "qemu/osdep.h"
> +#include "authz/pamacct.h"
> +#include "authz/trace.h"
> +#include "qom/object_interfaces.h"
> +
> +#include <security/pam_appl.h>
> +
> +
> +static bool qauthz_pam_is_allowed(QAuthZ *authz,
> +                                  const char *identity,
> +                                  Error **errp)
> +{
> +    QAuthZPam *pauthz = QAUTHZ_PAM(authz);
> +    const struct pam_conv pam_conversation = { 0 };
> +    pam_handle_t *pamh = NULL;
> +    int ret;
> +
> +    trace_qauthz_pam_check(authz, identity, pauthz->service);
> +    ret = pam_start(pauthz->service,
> +                    identity,
> +                    &pam_conversation,
> +                    &pamh);
> +    if (ret != PAM_SUCCESS) {
> +        error_setg(errp, "Unable to start PAM transaction: %s",
> +                   pam_strerror(NULL, ret));
> +        return false;
> +    }
> +
> +    ret = pam_acct_mgmt(pamh, PAM_SILENT);
> +    if (ret != PAM_SUCCESS) {
> +        error_setg(errp, "Unable to authorize user '%s': %s",
> +                   identity, pam_strerror(pamh, ret));
> +        goto cleanup;
> +    }
> +
> + cleanup:
> +    pam_end(pamh, ret);
> +    return ret == PAM_SUCCESS;
> +}
> +
> +
> +static void
> +qauthz_pam_prop_set_service(Object *obj,
> +                            const char *service,
> +                            Error **errp G_GNUC_UNUSED)
> +{
> +    QAuthZPam *pauthz = QAUTHZ_PAM(obj);
> +
> +    g_free(pauthz->service);
> +    pauthz->service = g_strdup(service);
> +}
> +
> +
> +static char *
> +qauthz_pam_prop_get_service(Object *obj,
> +                            Error **errp G_GNUC_UNUSED)
> +{
> +    QAuthZPam *pauthz = QAUTHZ_PAM(obj);
> +
> +    return g_strdup(pauthz->service);
> +}
> +
> +
> +static void
> +qauthz_pam_complete(UserCreatable *uc, Error **errp)
> +{
> +}
> +
> +
> +static void
> +qauthz_pam_finalize(Object *obj)
> +{
> +    QAuthZPam *pauthz = QAUTHZ_PAM(obj);
> +
> +    g_free(pauthz->service);
> +}
> +
> +
> +static void
> +qauthz_pam_class_init(ObjectClass *oc, void *data)
> +{
> +    UserCreatableClass *ucc = USER_CREATABLE_CLASS(oc);
> +    QAuthZClass *authz = QAUTHZ_CLASS(oc);
> +
> +    ucc->complete = qauthz_pam_complete;
> +    authz->is_allowed = qauthz_pam_is_allowed;
> +
> +    object_class_property_add_str(oc, "service",
> +                                  qauthz_pam_prop_get_service,
> +                                  qauthz_pam_prop_set_service,
> +                                  NULL);
> +}
> +
> +
> +QAuthZPam *qauthz_pam_new(const char *id,
> +                          const char *service,
> +                          Error **errp)
> +{
> +    return QAUTHZ_PAM(
> +        object_new_with_props(TYPE_QAUTHZ_PAM,
> +                              object_get_objects_root(),
> +                              id, errp,
> +                              "service", service,
> +                              NULL));
> +}
> +
> +
> +static const TypeInfo qauthz_pam_info = {
> +    .parent = TYPE_QAUTHZ,
> +    .name = TYPE_QAUTHZ_PAM,
> +    .instance_size = sizeof(QAuthZPam),
> +    .instance_finalize = qauthz_pam_finalize,
> +    .class_size = sizeof(QAuthZPamClass),
> +    .class_init = qauthz_pam_class_init,
> +    .interfaces = (InterfaceInfo[]) {
> +        { TYPE_USER_CREATABLE },
> +        { }
> +    }
> +};
> +
> +
> +static void
> +qauthz_pam_register_types(void)
> +{
> +    type_register_static(&qauthz_pam_info);
> +}
> +
> +
> +type_init(qauthz_pam_register_types);
> diff --git a/authz/Makefile.objs b/authz/Makefile.objs
> index 8351bf181d..ed7b273596 100644
> --- a/authz/Makefile.objs
> +++ b/authz/Makefile.objs
> @@ -2,3 +2,6 @@ authz-obj-y += base.o
>  authz-obj-y += simple.o
>  authz-obj-y += list.o
>  authz-obj-y += listfile.o
> +authz-obj-$(CONFIG_AUTH_PAM) += pamacct.o
> +
> +pamacct.o-libs = -lpam
> diff --git a/authz/trace-events b/authz/trace-events
> index fb65349a90..72c411927d 100644
> --- a/authz/trace-events
> +++ b/authz/trace-events
> @@ -13,3 +13,6 @@ qauthz_list_default_policy(void *authz, const char 
> *identity, int policy) "AuthZ
>  # auth/listfile.c
>  qauthz_list_file_load(void *authz, const char *filename) "AuthZ file %p load 
> filename=%s"
>  qauthz_list_file_refresh(void *authz, const char *filename, int success) 
> "AuthZ file %p load filename=%s success=%d"
> +
> +# auth/pam.c
> +qauthz_pam_check(void *authz, const char *identity, const char *service) 
> "AuthZ PAM %p identity=%s service=%s"
> diff --git a/qemu-options.hx b/qemu-options.hx
> index a1c3e0e59c..a9654b8115 100644
> --- a/qemu-options.hx
> +++ b/qemu-options.hx
> @@ -4447,6 +4447,41 @@ would look like:
>       ...
>  @end example
>
> address@hidden -object authz-pam,address@hidden,address@hidden
> +
> +Create an authorization object that will control access to network services.
> +
> +The @option{service} parameter provides the name of a PAM service to use
> +for authorization. It requires that a file @code{/etc/pam.d/@var{service}}
> +exist to provide the configuration for the @code{account} subsystem.
> +
> +An example authorization object to validate a TLS x509 distinguished
> +name would look like:
> +
> address@hidden
> + # $QEMU \
> +     ...
> +     -object authz-simple,id=auth0,service=qemu-vnc

oops, wrong example,

other than that,
Reviewed-by: Marc-André Lureau <address@hidden>

> +     ...
> address@hidden example
> +
> +There would then be a corresponding config file for PAM at
> address@hidden/etc/pam.d/qemu-vnc} that contains:
> +
> address@hidden
> +account requisite  pam_listfile.so item=user sense=allow \
> +           file=/etc/qemu/vnc.allow
> address@hidden example
> +
> +Finally the @code{/etc/qemu/vnc.allow} file would contain
> +the list of x509 distingished names that are permitted
> +access
> +
> address@hidden
> +CN=laptop.example.com,O=Example Home,L=London,ST=London,C=GB
> address@hidden example
> +
> +
>  @end table
>
>  ETEXI
> --
> 2.17.2
>
>


--
Marc-André Lureau



reply via email to

[Prev in Thread] Current Thread [Next in Thread]