[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PULL 16/52] target/arm: Implement support for taking excep
From: |
Peter Maydell |
Subject: |
[Qemu-devel] [PULL 16/52] target/arm: Implement support for taking exceptions to Hyp mode |
Date: |
Fri, 24 Aug 2018 10:33:07 +0100 |
Implement the necessary support code for taking exceptions
to Hyp mode in AArch32.
Signed-off-by: Peter Maydell <address@hidden>
Reviewed-by: Richard Henderson <address@hidden>
Reviewed-by: Edgar E. Iglesias <address@hidden>
Reviewed-by: Luc Michel <address@hidden>
Message-id: address@hidden
---
target/arm/helper.c | 82 +++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 82 insertions(+)
diff --git a/target/arm/helper.c b/target/arm/helper.c
index b47657c31b2..10f40b01700 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -8073,6 +8073,83 @@ static void take_aarch32_exception(CPUARMState *env, int
new_mode,
env->regs[15] = newpc;
}
+static void arm_cpu_do_interrupt_aarch32_hyp(CPUState *cs)
+{
+ /*
+ * Handle exception entry to Hyp mode; this is sufficiently
+ * different to entry to other AArch32 modes that we handle it
+ * separately here.
+ *
+ * The vector table entry used is always the 0x14 Hyp mode entry point,
+ * unless this is an UNDEF/HVC/abort taken from Hyp to Hyp.
+ * The offset applied to the preferred return address is always zero
+ * (see DDI0487C.a section G1.12.3).
+ * PSTATE A/I/F masks are set based only on the SCR.EA/IRQ/FIQ values.
+ */
+ uint32_t addr, mask;
+ ARMCPU *cpu = ARM_CPU(cs);
+ CPUARMState *env = &cpu->env;
+
+ switch (cs->exception_index) {
+ case EXCP_UDEF:
+ addr = 0x04;
+ break;
+ case EXCP_SWI:
+ addr = 0x14;
+ break;
+ case EXCP_BKPT:
+ /* Fall through to prefetch abort. */
+ case EXCP_PREFETCH_ABORT:
+ env->cp15.ifar_s = env->exception.vaddress;
+ qemu_log_mask(CPU_LOG_INT, "...with HIFAR 0x%x\n",
+ (uint32_t)env->exception.vaddress);
+ addr = 0x0c;
+ break;
+ case EXCP_DATA_ABORT:
+ env->cp15.dfar_s = env->exception.vaddress;
+ qemu_log_mask(CPU_LOG_INT, "...with HDFAR 0x%x\n",
+ (uint32_t)env->exception.vaddress);
+ addr = 0x10;
+ break;
+ case EXCP_IRQ:
+ addr = 0x18;
+ break;
+ case EXCP_FIQ:
+ addr = 0x1c;
+ break;
+ case EXCP_HVC:
+ addr = 0x08;
+ break;
+ case EXCP_HYP_TRAP:
+ addr = 0x14;
+ default:
+ cpu_abort(cs, "Unhandled exception 0x%x\n", cs->exception_index);
+ }
+
+ if (cs->exception_index != EXCP_IRQ && cs->exception_index != EXCP_FIQ) {
+ env->cp15.esr_el[2] = env->exception.syndrome;
+ }
+
+ if (arm_current_el(env) != 2 && addr < 0x14) {
+ addr = 0x14;
+ }
+
+ mask = 0;
+ if (!(env->cp15.scr_el3 & SCR_EA)) {
+ mask |= CPSR_A;
+ }
+ if (!(env->cp15.scr_el3 & SCR_IRQ)) {
+ mask |= CPSR_I;
+ }
+ if (!(env->cp15.scr_el3 & SCR_FIQ)) {
+ mask |= CPSR_F;
+ }
+
+ addr += env->cp15.hvbar;
+
+ take_aarch32_exception(env, ARM_CPU_MODE_HYP, mask, 0, addr);
+}
+
static void arm_cpu_do_interrupt_aarch32(CPUState *cs)
{
ARMCPU *cpu = ARM_CPU(cs);
@@ -8108,6 +8185,11 @@ static void arm_cpu_do_interrupt_aarch32(CPUState *cs)
env->cp15.mdscr_el1 = deposit64(env->cp15.mdscr_el1, 2, 4, moe);
}
+ if (env->exception.target_el == 2) {
+ arm_cpu_do_interrupt_aarch32_hyp(cs);
+ return;
+ }
+
/* TODO: Vectored interrupt controller. */
switch (cs->exception_index) {
case EXCP_UDEF:
--
2.18.0
- [Qemu-devel] [PULL 05/52] hw/intc/arm_gic: Make per-cpu GICH memory regions 0x200 bytes large, (continued)
- [Qemu-devel] [PULL 05/52] hw/intc/arm_gic: Make per-cpu GICH memory regions 0x200 bytes large, Peter Maydell, 2018/08/24
- [Qemu-devel] [PULL 03/52] target/arm: Use the int-to-float-scale softfloat routines, Peter Maydell, 2018/08/24
- [Qemu-devel] [PULL 01/52] softfloat: Add scaling int-to-float routines, Peter Maydell, 2018/08/24
- [Qemu-devel] [PULL 08/52] hw/arm/fsl-imx6ul: Connect VIRQ and VFIQ, Peter Maydell, 2018/08/24
- [Qemu-devel] [PULL 11/52] hw/arm/vexpress: Don't set info->secure_boot if CPU doesn't have EL3, Peter Maydell, 2018/08/24
- [Qemu-devel] [PULL 09/52] hw/arm/fsl-imx6ul: Connect VIRQ and VFIQ, Peter Maydell, 2018/08/24
- [Qemu-devel] [PULL 12/52] hw/arm/vexpress: Add "virtualization" property controlling presence of EL2, Peter Maydell, 2018/08/24
- [Qemu-devel] [PULL 13/52] target/arm: Implement RAZ/WI HACTLR2, Peter Maydell, 2018/08/24
- [Qemu-devel] [PULL 15/52] target/arm: Factor out code for taking an AArch32 exception, Peter Maydell, 2018/08/24
- [Qemu-devel] [PULL 10/52] hw/cpu/a15mpcore: If CPU has EL2, enable it on the GIC and wire it up, Peter Maydell, 2018/08/24
- [Qemu-devel] [PULL 16/52] target/arm: Implement support for taking exceptions to Hyp mode,
Peter Maydell <=
- [Qemu-devel] [PULL 18/52] hw/arm/boot: AArch32 kernels should be started in Hyp mode if available, Peter Maydell, 2018/08/24
- [Qemu-devel] [PULL 19/52] hw/misc/mps2-fpgaio: Implement 1Hz and 100Hz counters, Peter Maydell, 2018/08/24
- [Qemu-devel] [PULL 14/52] target/arm: Implement AArch32 HCR and HCR2, Peter Maydell, 2018/08/24
- [Qemu-devel] [PULL 17/52] target/arm: Clear CPSR.IL and CPSR.J on 32-bit exception entry, Peter Maydell, 2018/08/24
- [Qemu-devel] [PULL 20/52] hw/misc/mps2-fpgaio: Implement PSCNTR and COUNTER, Peter Maydell, 2018/08/24
- [Qemu-devel] [PULL 21/52] hw/timer/cmsdk-apb-dualtimer: Implement CMSDK dual timer module, Peter Maydell, 2018/08/24
- [Qemu-devel] [PULL 22/52] hw/arm/iotkit: Wire up the dualtimer, Peter Maydell, 2018/08/24
- [Qemu-devel] [PULL 23/52] hw/arm/mps2: Wire up dual-timer in mps2-an385 and mps2-an511, Peter Maydell, 2018/08/24
- [Qemu-devel] [PULL 24/52] hw/arm/iotkit: Wire up the watchdogs, Peter Maydell, 2018/08/24
- [Qemu-devel] [PULL 25/52] hw/arm/iotkit: Wire up the S32KTIMER, Peter Maydell, 2018/08/24