qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PULL 01/32] aspeed/smc: fix dummy cycles count when in dua


From: Peter Maydell
Subject: [Qemu-devel] [PULL 01/32] aspeed/smc: fix dummy cycles count when in dual IO mode
Date: Tue, 26 Jun 2018 17:56:27 +0100

From: Cédric Le Goater <address@hidden>

When configured in dual I/O mode, address and data are sent in dual
mode, including the dummy byte cycles in between. Adapt the count to
the IO setting.

Signed-off-by: Cédric Le Goater <address@hidden>
Reviewed-by: Andrew Jeffery <address@hidden>
Message-id: address@hidden
Signed-off-by: Peter Maydell <address@hidden>
---
 hw/ssi/aspeed_smc.c | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/hw/ssi/aspeed_smc.c b/hw/ssi/aspeed_smc.c
index 5059396bc62..fce126e6ee9 100644
--- a/hw/ssi/aspeed_smc.c
+++ b/hw/ssi/aspeed_smc.c
@@ -66,6 +66,8 @@
 
 /* CEx Control Register */
 #define R_CTRL0           (0x10 / 4)
+#define   CTRL_IO_DUAL_DATA        (1 << 29)
+#define   CTRL_IO_DUAL_ADDR_DATA   (1 << 28) /* Includes dummies */
 #define   CTRL_CMD_SHIFT           16
 #define   CTRL_CMD_MASK            0xff
 #define   CTRL_DUMMY_HIGH_SHIFT    14
@@ -492,8 +494,13 @@ static int aspeed_smc_flash_dummies(const AspeedSMCFlash 
*fl)
     uint32_t r_ctrl0 = s->regs[s->r_ctrl0 + fl->id];
     uint32_t dummy_high = (r_ctrl0 >> CTRL_DUMMY_HIGH_SHIFT) & 0x1;
     uint32_t dummy_low = (r_ctrl0 >> CTRL_DUMMY_LOW_SHIFT) & 0x3;
+    uint32_t dummies = ((dummy_high << 2) | dummy_low) * 8;
 
-    return ((dummy_high << 2) | dummy_low) * 8;
+    if (r_ctrl0 & CTRL_IO_DUAL_ADDR_DATA) {
+        dummies /= 2;
+    }
+
+    return dummies;
 }
 
 static void aspeed_smc_flash_send_addr(AspeedSMCFlash *fl, uint32_t addr)
-- 
2.17.1




reply via email to

[Prev in Thread] Current Thread [Next in Thread]