[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v6 26/28] fpu/softfloat: Define floatN_default_n
From: |
Alex Bennée |
Subject: |
Re: [Qemu-devel] [PATCH v6 26/28] fpu/softfloat: Define floatN_default_nan in terms of parts_default_nan |
Date: |
Wed, 16 May 2018 14:46:25 +0100 |
User-agent: |
mu4e 1.1.0; emacs 26.1 |
Richard Henderson <address@hidden> writes:
> Isolate the target-specific choice to 2 functions instead of 6.
>
> The code in float16_default_nan was only correct for ARM, MIPS, and X86.
> Though float16 support is rare among our targets.
>
> The code in float128_default_nan was arguably wrong for Sparc. While
> QEMU supports the Sparc 128-bit insns, no real cpu enables it.
>
> The code in floatx80_default_nan tried to be over-general. There are
> only two targets that support this format: x86 and m68k. Thus there
> is no point in inventing a value for snan_bit_is_one.
>
> Move routines that no longer have ifdefs out of softfloat-specialize.h.
>
> Signed-off-by: Richard Henderson <address@hidden>
Reviewed-by: Alex Bennée <address@hidden>
>
> ---
> v6
> - shift the nan fraction into place before raw packing
> ---
> fpu/softfloat-specialize.h | 105 +++----------------------------------
> fpu/softfloat.c | 41 +++++++++++++++
> 2 files changed, 47 insertions(+), 99 deletions(-)
>
> diff --git a/fpu/softfloat-specialize.h b/fpu/softfloat-specialize.h
> index 0399dfe011..9d562ed504 100644
> --- a/fpu/softfloat-specialize.h
> +++ b/fpu/softfloat-specialize.h
> @@ -179,94 +179,22 @@ static FloatParts parts_silence_nan(FloatParts a,
> float_status *status)
> return a;
> }
>
> -/*----------------------------------------------------------------------------
> -| The pattern for a default generated half-precision NaN.
> -*----------------------------------------------------------------------------*/
> -float16 float16_default_nan(float_status *status)
> -{
> -#if defined(TARGET_ARM)
> - return const_float16(0x7E00);
> -#else
> - if (snan_bit_is_one(status)) {
> - return const_float16(0x7DFF);
> - } else {
> -#if defined(TARGET_MIPS)
> - return const_float16(0x7E00);
> -#else
> - return const_float16(0xFE00);
> -#endif
> - }
> -#endif
> -}
> -
> -/*----------------------------------------------------------------------------
> -| The pattern for a default generated single-precision NaN.
> -*----------------------------------------------------------------------------*/
> -float32 float32_default_nan(float_status *status)
> -{
> -#if defined(TARGET_SPARC) || defined(TARGET_M68K)
> - return const_float32(0x7FFFFFFF);
> -#elif defined(TARGET_PPC) || defined(TARGET_ARM) || defined(TARGET_ALPHA) ||
> \
> - defined(TARGET_XTENSA) || defined(TARGET_S390X) || \
> - defined(TARGET_TRICORE) || defined(TARGET_RISCV)
> - return const_float32(0x7FC00000);
> -#elif defined(TARGET_HPPA)
> - return const_float32(0x7FA00000);
> -#else
> - if (snan_bit_is_one(status)) {
> - return const_float32(0x7FBFFFFF);
> - } else {
> -#if defined(TARGET_MIPS)
> - return const_float32(0x7FC00000);
> -#else
> - return const_float32(0xFFC00000);
> -#endif
> - }
> -#endif
> -}
> -
> -/*----------------------------------------------------------------------------
> -| The pattern for a default generated double-precision NaN.
> -*----------------------------------------------------------------------------*/
> -float64 float64_default_nan(float_status *status)
> -{
> -#if defined(TARGET_SPARC) || defined(TARGET_M68K)
> - return const_float64(LIT64(0x7FFFFFFFFFFFFFFF));
> -#elif defined(TARGET_PPC) || defined(TARGET_ARM) || defined(TARGET_ALPHA) ||
> \
> - defined(TARGET_S390X) || defined(TARGET_RISCV)
> - return const_float64(LIT64(0x7FF8000000000000));
> -#elif defined(TARGET_HPPA)
> - return const_float64(LIT64(0x7FF4000000000000));
> -#else
> - if (snan_bit_is_one(status)) {
> - return const_float64(LIT64(0x7FF7FFFFFFFFFFFF));
> - } else {
> -#if defined(TARGET_MIPS)
> - return const_float64(LIT64(0x7FF8000000000000));
> -#else
> - return const_float64(LIT64(0xFFF8000000000000));
> -#endif
> - }
> -#endif
> -}
> -
>
> /*----------------------------------------------------------------------------
> | The pattern for a default generated extended double-precision NaN.
>
> *----------------------------------------------------------------------------*/
> floatx80 floatx80_default_nan(float_status *status)
> {
> floatx80 r;
> +
> + /* None of the targets that have snan_bit_is_one use floatx80. */
> + assert(!snan_bit_is_one(status));
> #if defined(TARGET_M68K)
> r.low = LIT64(0xFFFFFFFFFFFFFFFF);
> r.high = 0x7FFF;
> #else
> - if (snan_bit_is_one(status)) {
> - r.low = LIT64(0xBFFFFFFFFFFFFFFF);
> - r.high = 0x7FFF;
> - } else {
> - r.low = LIT64(0xC000000000000000);
> - r.high = 0xFFFF;
> - }
> + /* X86 */
> + r.low = LIT64(0xC000000000000000);
> + r.high = 0xFFFF;
> #endif
> return r;
> }
> @@ -285,27 +213,6 @@ floatx80 floatx80_default_nan(float_status *status)
> const floatx80 floatx80_infinity
> = make_floatx80_init(floatx80_infinity_high, floatx80_infinity_low);
>
> -/*----------------------------------------------------------------------------
> -| The pattern for a default generated quadruple-precision NaN.
> -*----------------------------------------------------------------------------*/
> -float128 float128_default_nan(float_status *status)
> -{
> - float128 r;
> -
> - if (snan_bit_is_one(status)) {
> - r.low = LIT64(0xFFFFFFFFFFFFFFFF);
> - r.high = LIT64(0x7FFF7FFFFFFFFFFF);
> - } else {
> - r.low = LIT64(0x0000000000000000);
> -#if defined(TARGET_S390X) || defined(TARGET_PPC) || defined(TARGET_RISCV)
> - r.high = LIT64(0x7FFF800000000000);
> -#else
> - r.high = LIT64(0xFFFF800000000000);
> -#endif
> - }
> - return r;
> -}
> -
>
> /*----------------------------------------------------------------------------
> | Raises the exceptions specified by `flags'. Floating-point traps can be
> | defined here if desired. It is currently not possible for such a trap
> diff --git a/fpu/softfloat.c b/fpu/softfloat.c
> index 8e97602ace..c8b33e35f4 100644
> --- a/fpu/softfloat.c
> +++ b/fpu/softfloat.c
> @@ -2092,6 +2092,47 @@ float64 __attribute__((flatten)) float64_sqrt(float64
> a, float_status *status)
> return float64_round_pack_canonical(pr, status);
> }
>
> +/*----------------------------------------------------------------------------
> +| The pattern for a default generated NaN.
> +*----------------------------------------------------------------------------*/
> +
> +float16 float16_default_nan(float_status *status)
> +{
> + FloatParts p = parts_default_nan(status);
> + p.frac >>= float16_params.frac_shift;
> + return float16_pack_raw(p);
> +}
> +
> +float32 float32_default_nan(float_status *status)
> +{
> + FloatParts p = parts_default_nan(status);
> + p.frac >>= float32_params.frac_shift;
> + return float32_pack_raw(p);
> +}
> +
> +float64 float64_default_nan(float_status *status)
> +{
> + FloatParts p = parts_default_nan(status);
> + p.frac >>= float64_params.frac_shift;
> + return float64_pack_raw(p);
> +}
> +
> +float128 float128_default_nan(float_status *status)
> +{
> + FloatParts p = parts_default_nan(status);
> + float128 r;
> +
> + /* Extrapolate from the choices made by parts_default_nan to fill
> + * in the quad-floating format. If the low bit is set, assume we
> + * want to set all non-snan bits.
> + */
> + r.low = -(p.frac & 1);
> + r.high = p.frac >> (DECOMPOSED_BINARY_POINT - 48);
> + r.high |= LIT64(0x7FFF000000000000);
> + r.high |= (uint64_t)p.sign << 63;
> +
> + return r;
> +}
>
>
> /*----------------------------------------------------------------------------
> | Takes a 64-bit fixed-point value `absZ' with binary point between bits 6
--
Alex Bennée
- [Qemu-devel] [PATCH v6 19/28] target/s390x: Remove floatX_maybe_silence_nan from conversions, (continued)
- [Qemu-devel] [PATCH v6 19/28] target/s390x: Remove floatX_maybe_silence_nan from conversions, Richard Henderson, 2018/05/15
- [Qemu-devel] [PATCH v6 20/28] fpu/softfloat: Use float*_silence_nan in propagateFloat*NaN, Richard Henderson, 2018/05/15
- [Qemu-devel] [PATCH v6 18/28] target/riscv: Remove floatX_maybe_silence_nan from conversions, Richard Henderson, 2018/05/15
- [Qemu-devel] [PATCH v6 21/28] fpu/softfloat: Remove floatX_maybe_silence_nan, Richard Henderson, 2018/05/15
- [Qemu-devel] [PATCH v6 23/28] fpu/softfloat: Make is_nan et al available to softfloat-specialize.h, Richard Henderson, 2018/05/15
- [Qemu-devel] [PATCH v6 22/28] fpu/softfloat: Specialize on snan_bit_is_one, Richard Henderson, 2018/05/15
- [Qemu-devel] [PATCH v6 25/28] fpu/softfloat: Pass FloatClass to pickNaNMulAdd, Richard Henderson, 2018/05/15
- [Qemu-devel] [PATCH v6 24/28] fpu/softfloat: Pass FloatClass to pickNaN, Richard Henderson, 2018/05/15
- [Qemu-devel] [PATCH v6 27/28] fpu/softfloat: Clean up parts_default_nan, Richard Henderson, 2018/05/15
- [Qemu-devel] [PATCH v6 26/28] fpu/softfloat: Define floatN_default_nan in terms of parts_default_nan, Richard Henderson, 2018/05/15
- Re: [Qemu-devel] [PATCH v6 26/28] fpu/softfloat: Define floatN_default_nan in terms of parts_default_nan,
Alex Bennée <=
- [Qemu-devel] [PATCH v6 28/28] fpu/softfloat: Define floatN_silence_nan in terms of parts_silence_nan, Richard Henderson, 2018/05/15
- Re: [Qemu-devel] [PATCH v6 00/28] softfloat patch roundup, Alex Bennée, 2018/05/16