qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [qemu RFC v2] qapi: add "firmware.json"


From: Laszlo Ersek
Subject: [Qemu-devel] [qemu RFC v2] qapi: add "firmware.json"
Date: Wed, 18 Apr 2018 00:40:54 +0200

Add a schema that describes the different uses and properties of virtual
machine firmware.

Each firmware executable installed on a host system should come with at
least one JSON file that conforms to this schema. Each file informs the
management applications about the firmware's properties and one possible
use case / feature set.

In addition, a configuration directory with symlinks to the JSON files
should exist, with the symlinks carefully named to reflect a priority
order. Management applications can then search this directory in priority
order for the first firmware description that satisfies their search
criteria. The found JSON file provides the management layer with domain
configuration bits that are required to run the firmware binary for a
certain use case or feature set.

Cc: "Daniel P. Berrange" <address@hidden>
Cc: Alexander Graf <address@hidden>
Cc: Ard Biesheuvel <address@hidden>
Cc: David Gibson <address@hidden>
Cc: Eric Blake <address@hidden>
Cc: Gary Ching-Pang Lin <address@hidden>
Cc: Gerd Hoffmann <address@hidden>
Cc: Kashyap Chamarthy <address@hidden>
Cc: Markus Armbruster <address@hidden>
Cc: Michael Roth <address@hidden>
Cc: Michal Privoznik <address@hidden>
Cc: Paolo Bonzini <address@hidden>
Cc: Peter Krempa <address@hidden>
Cc: Peter Maydell <address@hidden>
Cc: Thomas Huth <address@hidden>
Signed-off-by: Laszlo Ersek <address@hidden>
---

Notes:
    RFCv2:
    - previous version (RFCv1) was posted at
      <http://mid.mail-archive.com/address@hidden>
    
    - v2 is basically a rewrite from scratch, starting out with Dan's
      definitions from
      <http://mid.mail-archive.com/address@hidden> and
      <http://mid.mail-archive.com/address@hidden>,
      hopefully addressing others' feedback as well
    
    RFCv1:
    - Folks on the CC list, please try to see if the suggested schema is
      flexible enough to describe the virtual firmware(s) that you are
      familiar with. Thanks!

 Makefile              |   9 +
 Makefile.objs         |   4 +
 qapi/firmware.json    | 503 ++++++++++++++++++++++++++++++++++++++++++++++++++
 qapi/qapi-schema.json |   1 +
 qmp.c                 |   5 +
 .gitignore            |   4 +
 6 files changed, 526 insertions(+)
 create mode 100644 qapi/firmware.json

diff --git a/Makefile b/Makefile
index d71dd5bea416..32034abe1583 100644
--- a/Makefile
+++ b/Makefile
@@ -97,6 +97,7 @@ GENERATED_FILES += qapi/qapi-types-block.h 
qapi/qapi-types-block.c
 GENERATED_FILES += qapi/qapi-types-char.h qapi/qapi-types-char.c
 GENERATED_FILES += qapi/qapi-types-common.h qapi/qapi-types-common.c
 GENERATED_FILES += qapi/qapi-types-crypto.h qapi/qapi-types-crypto.c
+GENERATED_FILES += qapi/qapi-types-firmware.h qapi/qapi-types-firmware.c
 GENERATED_FILES += qapi/qapi-types-introspect.h qapi/qapi-types-introspect.c
 GENERATED_FILES += qapi/qapi-types-migration.h qapi/qapi-types-migration.c
 GENERATED_FILES += qapi/qapi-types-misc.h qapi/qapi-types-misc.c
@@ -115,6 +116,7 @@ GENERATED_FILES += qapi/qapi-visit-block.h 
qapi/qapi-visit-block.c
 GENERATED_FILES += qapi/qapi-visit-char.h qapi/qapi-visit-char.c
 GENERATED_FILES += qapi/qapi-visit-common.h qapi/qapi-visit-common.c
 GENERATED_FILES += qapi/qapi-visit-crypto.h qapi/qapi-visit-crypto.c
+GENERATED_FILES += qapi/qapi-visit-firmware.h qapi/qapi-visit-firmware.c
 GENERATED_FILES += qapi/qapi-visit-introspect.h qapi/qapi-visit-introspect.c
 GENERATED_FILES += qapi/qapi-visit-migration.h qapi/qapi-visit-migration.c
 GENERATED_FILES += qapi/qapi-visit-misc.h qapi/qapi-visit-misc.c
@@ -132,6 +134,7 @@ GENERATED_FILES += qapi/qapi-commands-block.h 
qapi/qapi-commands-block.c
 GENERATED_FILES += qapi/qapi-commands-char.h qapi/qapi-commands-char.c
 GENERATED_FILES += qapi/qapi-commands-common.h qapi/qapi-commands-common.c
 GENERATED_FILES += qapi/qapi-commands-crypto.h qapi/qapi-commands-crypto.c
+GENERATED_FILES += qapi/qapi-commands-firmware.h qapi/qapi-commands-firmware.c
 GENERATED_FILES += qapi/qapi-commands-introspect.h 
qapi/qapi-commands-introspect.c
 GENERATED_FILES += qapi/qapi-commands-migration.h 
qapi/qapi-commands-migration.c
 GENERATED_FILES += qapi/qapi-commands-misc.h qapi/qapi-commands-misc.c
@@ -149,6 +152,7 @@ GENERATED_FILES += qapi/qapi-events-block.h 
qapi/qapi-events-block.c
 GENERATED_FILES += qapi/qapi-events-char.h qapi/qapi-events-char.c
 GENERATED_FILES += qapi/qapi-events-common.h qapi/qapi-events-common.c
 GENERATED_FILES += qapi/qapi-events-crypto.h qapi/qapi-events-crypto.c
+GENERATED_FILES += qapi/qapi-events-firmware.h qapi/qapi-events-firmware.c
 GENERATED_FILES += qapi/qapi-events-introspect.h qapi/qapi-events-introspect.c
 GENERATED_FILES += qapi/qapi-events-migration.h qapi/qapi-events-migration.c
 GENERATED_FILES += qapi/qapi-events-misc.h qapi/qapi-events-misc.c
@@ -581,6 +585,7 @@ qapi-modules = $(SRC_PATH)/qapi/qapi-schema.json 
$(SRC_PATH)/qapi/common.json \
                $(SRC_PATH)/qapi/block.json $(SRC_PATH)/qapi/block-core.json \
                $(SRC_PATH)/qapi/char.json \
                $(SRC_PATH)/qapi/crypto.json \
+               $(SRC_PATH)/qapi/firmware.json \
                $(SRC_PATH)/qapi/introspect.json \
                $(SRC_PATH)/qapi/migration.json \
                $(SRC_PATH)/qapi/misc.json \
@@ -600,6 +605,7 @@ qapi/qapi-types-block.c qapi/qapi-types-block.h \
 qapi/qapi-types-char.c qapi/qapi-types-char.h \
 qapi/qapi-types-common.c qapi/qapi-types-common.h \
 qapi/qapi-types-crypto.c qapi/qapi-types-crypto.h \
+qapi/qapi-types-firmware.c qapi/qapi-types-firmware.h \
 qapi/qapi-types-introspect.c qapi/qapi-types-introspect.h \
 qapi/qapi-types-migration.c qapi/qapi-types-migration.h \
 qapi/qapi-types-misc.c qapi/qapi-types-misc.h \
@@ -618,6 +624,7 @@ qapi/qapi-visit-block.c qapi/qapi-visit-block.h \
 qapi/qapi-visit-char.c qapi/qapi-visit-char.h \
 qapi/qapi-visit-common.c qapi/qapi-visit-common.h \
 qapi/qapi-visit-crypto.c qapi/qapi-visit-crypto.h \
+qapi/qapi-visit-firmware.c qapi/qapi-visit-firmware.h \
 qapi/qapi-visit-introspect.c qapi/qapi-visit-introspect.h \
 qapi/qapi-visit-migration.c qapi/qapi-visit-migration.h \
 qapi/qapi-visit-misc.c qapi/qapi-visit-misc.h \
@@ -635,6 +642,7 @@ qapi/qapi-commands-block.c qapi/qapi-commands-block.h \
 qapi/qapi-commands-char.c qapi/qapi-commands-char.h \
 qapi/qapi-commands-common.c qapi/qapi-commands-common.h \
 qapi/qapi-commands-crypto.c qapi/qapi-commands-crypto.h \
+qapi/qapi-commands-firmware.c qapi/qapi-commands-firmware.h \
 qapi/qapi-commands-introspect.c qapi/qapi-commands-introspect.h \
 qapi/qapi-commands-migration.c qapi/qapi-commands-migration.h \
 qapi/qapi-commands-misc.c qapi/qapi-commands-misc.h \
@@ -652,6 +660,7 @@ qapi/qapi-events-block.c qapi/qapi-events-block.h \
 qapi/qapi-events-char.c qapi/qapi-events-char.h \
 qapi/qapi-events-common.c qapi/qapi-events-common.h \
 qapi/qapi-events-crypto.c qapi/qapi-events-crypto.h \
+qapi/qapi-events-firmware.c qapi/qapi-events-firmware.h \
 qapi/qapi-events-introspect.c qapi/qapi-events-introspect.h \
 qapi/qapi-events-migration.c qapi/qapi-events-migration.h \
 qapi/qapi-events-misc.c qapi/qapi-events-misc.h \
diff --git a/Makefile.objs b/Makefile.objs
index c6c9b8fc2177..6ed4e0010b10 100644
--- a/Makefile.objs
+++ b/Makefile.objs
@@ -9,6 +9,7 @@ util-obj-y += qapi/qapi-types-block.o
 util-obj-y += qapi/qapi-types-char.o
 util-obj-y += qapi/qapi-types-common.o
 util-obj-y += qapi/qapi-types-crypto.o
+util-obj-y += qapi/qapi-types-firmware.o
 util-obj-y += qapi/qapi-types-introspect.o
 util-obj-y += qapi/qapi-types-migration.o
 util-obj-y += qapi/qapi-types-misc.o
@@ -27,6 +28,7 @@ util-obj-y += qapi/qapi-visit-block.o
 util-obj-y += qapi/qapi-visit-char.o
 util-obj-y += qapi/qapi-visit-common.o
 util-obj-y += qapi/qapi-visit-crypto.o
+util-obj-y += qapi/qapi-visit-firmware.o
 util-obj-y += qapi/qapi-visit-introspect.o
 util-obj-y += qapi/qapi-visit-migration.o
 util-obj-y += qapi/qapi-visit-misc.o
@@ -44,6 +46,7 @@ util-obj-y += qapi/qapi-events-block.o
 util-obj-y += qapi/qapi-events-char.o
 util-obj-y += qapi/qapi-events-common.o
 util-obj-y += qapi/qapi-events-crypto.o
+util-obj-y += qapi/qapi-events-firmware.o
 util-obj-y += qapi/qapi-events-introspect.o
 util-obj-y += qapi/qapi-events-migration.o
 util-obj-y += qapi/qapi-events-misc.o
@@ -139,6 +142,7 @@ common-obj-y += qapi/qapi-commands-block.o
 common-obj-y += qapi/qapi-commands-char.o
 common-obj-y += qapi/qapi-commands-common.o
 common-obj-y += qapi/qapi-commands-crypto.o
+common-obj-y += qapi/qapi-commands-firmware.o
 common-obj-y += qapi/qapi-commands-introspect.o
 common-obj-y += qapi/qapi-commands-migration.o
 common-obj-y += qapi/qapi-commands-misc.o
diff --git a/qapi/firmware.json b/qapi/firmware.json
new file mode 100644
index 000000000000..3653b4628a5b
--- /dev/null
+++ b/qapi/firmware.json
@@ -0,0 +1,503 @@
+# -*- Mode: Python -*-
+#
+# Copyright (C) 2018 Red Hat, Inc.
+#
+# Authors:
+#  Daniel P. Berrange <address@hidden>
+#  Laszlo Ersek <address@hidden>
+#
+# This work is licensed under the terms of the GNU GPL, version 2 or later. See
+# the COPYING file in the top-level directory.
+
+##
+# = Firmware
+##
+
+{ 'include' : 'block-core.json' }
+
+##
+# @FirmwareType:
+#
+# Lists firmware types commonly used with QEMU virtual machines.
+#
+# @bios: The firmware was built from the SeaBIOS project.
+#
+# @slof: The firmware was built from the Slimline Open Firmware project.
+#
+# @uboot: The firmware was built from the U-Boot project.
+#
+# @uefi: The firmware was built from the edk2 (EFI Development Kit II) project.
+#
+# Since: 2.13
+##
+{ 'enum' : 'FirmwareType',
+  'data' : [ 'bios', 'slof', 'uboot', 'uefi' ] }
+
+##
+# @FirmwareDevice:
+#
+# Defines the device types that firmware can be mapped into.
+#
+# @flash: The firmware executable and its accompanying NVRAM file are to be
+#         mapped into a pflash chip each.
+#
+# @kernel: The firmware is to be loaded like a Linux kernel. This is similar to
+#          @memory but may imply additional processing that is specific to the
+#          target architecture and machine type.
+#
+# @memory: The firmware is to be mapped into memory.
+#
+# Since: 2.13
+##
+{ 'enum' : 'FirmwareDevice',
+  'data' : [ 'flash', 'kernel', 'memory' ] }
+
+##
+# @FirmwareArchitecture:
+#
+# Defines the target architectures (emulator binaries) that firmware may
+# execute on.
+#
+# @aarch64: The firmware can be executed by the qemu-system-aarch64 emulator.
+#
+# @arm: The firmware can be executed by the qemu-system-arm emulator.
+#
+# @i386: The firmware can be executed by the qemu-system-i386 emulator.
+#
+# @x86_64: The firmware can be executed by the qemu-system-x86_64 emulator.
+#
+# Since: 2.13
+##
+{ 'enum' : 'FirmwareArchitecture',
+  'data' : [ 'aarch64', 'arm', 'i386', 'x86_64' ] }
+
+##
+# @FirmwareTarget:
+#
+# Defines the machine types that firmware may execute on.
+#
+# @architecture: Determines the emulation target (the QEMU system emulator)
+#                that can execute the firmware.
+#
+# @machines: Lists the machine types (known by the emulator that is specified
+#            through @architecture) that can execute the firmware. Elements of
+#            @machines are not supposed to be versioned; if a machine type is
+#            versioned in QEMU (e.g. "pc-i440fx-2.12"), then its unversioned
+#            variant, which typically refers to the latest version (e.g. "pc"),
+#            should be listed in @machines. On the QEMU command line, "-machine
+#            type=..." specifies the requested machine type.
+#
+# Since: 2.13
+##
+{ 'struct' : 'FirmwareTarget',
+  'data'   : { 'architecture' : 'FirmwareArchitecture',
+               'machines'     : [ 'str' ] } }
+
+##
+# @FirmwareFeature:
+#
+# Defines the features that firmware may support, and the platform requirements
+# that firmware may present.
+#
+# @acpi-s3: The firmware supports S3 sleep (suspend to RAM), as defined in the
+#           ACPI specification. On the "pc" machine type of the @i386 and
+#           @x86_64 emulation targets, S3 can be enabled with "-global
+#           PIIX4_PM.disable_s3=0" and disabled with "-global
+#           PIIX4_PM.disable_s3=1". On the "q35" machine type of the @i386 and
+#           @x86_64 emulation targets, S3 can be enabled with "-global
+#           ICH9-LPC.disable_s3=0" and disabled with "-global
+#           ICH9-LPC.disable_s3=1".
+#
+# @acpi-s4: The firmware supports S4 hibernation (suspend to disk), as defined
+#           in the ACPI specification. On the "pc" machine type of the @i386
+#           and @x86_64 emulation targets, S4 can be enabled with "-global
+#           PIIX4_PM.disable_s4=0" and disabled with "-global
+#           PIIX4_PM.disable_s4=1". On the "q35" machine type of the @i386 and
+#           @x86_64 emulation targets, S4 can be enabled with "-global
+#           ICH9-LPC.disable_s4=0" and disabled with "-global
+#           ICH9-LPC.disable_s4=1".
+#
+# @amd-sev: The firmware supports running under AMD Secure Encrypted
+#           Virtualization, as specified in the AMD64 Architecture Programmer's
+#           Manual. QEMU command line options related to this feature are
+#           documented in "docs/amd-memory-encryption.txt".
+#
+# @requires-smm: The firmware requires the platform to emulate SMM (System
+#                Management Mode), as defined in the AMD64 Architecture
+#                Programmer's Manual, and in the Intel(R)64 and IA-32
+#                Architectures Software Developer's Manual. On the "q35"
+#                machine type of the @i386 and @x86_64 emulation targets, SMM
+#                emulation can be enabled with "-machine smm=on". (On the "q35"
+#                machine type of the @i386 emulation target, @requires-smm
+#                presents further CPU requirements; one combination known to
+#                work is "-cpu coreduo,-nx".) If the firmware is marked as both
+#                @secure-boot and @requires-smm, then write accesses to the
+#                pflash chip (NVRAM) that holds the UEFI variable store must be
+#                restricted to code that executes in SMM, using the additional
+#                option "-global driver=cfi.pflash01,property=secure,value=on".
+#                Furthermore, a large guest-physical address space (comprising
+#                guest RAM, memory hotplug range, and 64-bit PCI MMIO
+#                aperture), and/or a high VCPU count, may present high SMRAM
+#                requirements from the firmware. On the "q35" machine type of
+#                the @i386 and @x86_64 emulation targets, the SMRAM size may be
+#                increased above the default 16MB with the "-global
+#                mch.extended-tseg-mbytes=uint16" option. As a rule of thumb,
+#                the default 16MB size suffices for 1TB of guest-phys address
+#                space and a few tens of VCPUs; for every further TB of
+#                guest-phys address space, add 8MB of SMRAM. 48MB should
+#                suffice for 4TB of guest-phys address space and 2-3 hundred
+#                VCPUs.
+#
+# @secure-boot: The firmware implements the software interfaces for UEFI Secure
+#               Boot, as defined in the UEFI specification. Note that without
+#               @requires-smm, guest code running with kernel privileges can
+#               undermine the security of Secure Boot.
+#
+# @secure-boot-enrolled-keys: The variable store (NVRAM) template associated
+#                             with the firmware binary has the Secure Boot
+#                             operational mode enabled, and -- at least -- the
+#                             following certificates enrolled. (1) As Platform
+#                             Key (PK), and as one Key Exchange Key (KEK), a
+#                             self-signed certificate issued by the firmware
+#                             distributor is enrolled. (2) As another Key
+#                             Exchange Key (KEK), the "Microsoft Corporation
+#                             KEK CA 2011" certificate is enrolled. The UEFI
+#                             Forum releases updates for the Secure Boot
+#                             Signature/Certificate Blacklist ("dbx")
+#                             periodically at
+#                             <http://www.uefi.org/revocationlistfile>, signed
+#                             with a certificate chain anchored in this
+#                             certificate. (3) As one Secure Boot
+#                             Signature/Certificate ("db"), the "Microsoft
+#                             Windows Production PCA 2011" certificate is
+#                             enrolled. This certificate verifies Windows 8,
+#                             Windows Server 2012 R2, etc boot loaders. (4) As
+#                             another Secure Boot Signature/Certificate ("db"),
+#                             the "Microsoft Corporation UEFI CA 2011"
+#                             certificate is enrolled. This certificate
+#                             verifies the "shim" UEFI application, and PCI
+#                             expansion ROMs. @secure-boot-enrolled-keys is
+#                             only valid if the firmware also supports
+#                             @secure-boot.
+#
+# @verbose-dynamic: When firmware log capture is enabled, the firmware logs a
+#                   large amount of debug messages, which may impact boot
+#                   performance. With log capture disabled, there is no boot
+#                   performance impact. On the "pc" and "q35" machine types of
+#                   the @i386 and @x86_64 emulation targets, firmware log
+#                   capture can be enabled with the QEMU command line options
+#                   "-chardev file,id=fwdebug,path=LOGFILEPATH -device
+#                   isa-debugcon,iobase=0x402,chardev=fwdebug".
+#                   @verbose-dynamic is mutually exclusive with
+#                   @verbose-static.
+#
+# @verbose-static: The firmware unconditionally produces a large amount of
+#                  debug messages, which may impact boot performance. This
+#                  feature may typically be carried by certain UEFI firmware
+#                  for the "virt" machine type of the @arm and @aarch64
+#                  emulation targets, where the debug messages are written to
+#                  the first (always present) PL011 UART. @verbose-static is
+#                  mutually exclusive with @verbose-dynamic.
+#
+# Since: 2.13
+##
+{ 'enum' : 'FirmwareFeature',
+  'data' : [ 'acpi-s3', 'acpi-s4', 'amd-sev', 'requires-smm', 'secure-boot',
+             'secure-boot-enrolled-keys', 'verbose-dynamic',
+             'verbose-static' ] }
+
+##
+# @FirmwareFlashFile:
+#
+# Defines common properties that are necessary for loading a firmware file into
+# a pflash chip. The corresponding QEMU command line option is "-drive
+# address@hidden,address@hidden". Note however that the option-argument shown
+# here is incomplete; it is completed under @FirmwareMappingFlash.
+#
+# @pathname: Specifies the pathname on the host filesystem where the firmware
+#            file can be found.
+#
+# @format: Specifies the block format of the file pointed-to by @pathname, such
+#          as @raw or @qcow2.
+#
+# Since: 2.13
+##
+{ 'struct' : 'FirmwareFlashFile',
+  'data'   : { 'pathname' : 'str',
+               'format'   : 'BlockdevDriver' } }
+
+##
+# @FirmwareMappingFlash:
+#
+# Describes loading and mapping properties for the firmware executable and its
+# accompanying NVRAM file, when @FirmwareDevice is @flash.
+#
+# @executable: Identifies the firmware executable. The firmware executable may
+#              be shared by multiple virtual machine definitions. The
+#              corresponding QEMU command line option is "-drive
+#              
if=pflash,unit=0,readonly=on,address@hidden@pathname,address@hidden@format".
+#
+# @nvram_template: Identifies the NVRAM template compatible with @executable.
+#                  Management software instantiates an individual copy -- a
+#                  specific NVRAM file -- from @address@hidden for
+#                  each new virtual machine definition created.
+#                  @address@hidden itself is never mapped into
+#                  virtual machines, only individual copies of it are. An NVRAM
+#                  file is typically used for persistently storing the
+#                  non-volatile UEFI variables of a virtual machine definition.
+#                  The corresponding QEMU command line option is "-drive
+#                  
if=pflash,unit=1,readonly=off,file=PATHNAME_OF_PRIVATE_NVRAM_FILE,address@hidden@format".
+#
+# Since: 2.13
+##
+{ 'struct' : 'FirmwareMappingFlash',
+  'data'   : { 'executable'     : 'FirmwareFlashFile',
+               'nvram_template' : 'FirmwareFlashFile' } }
+
+##
+# @FirmwareMappingKernel:
+#
+# Describes loading and mapping properties for the firmware executable, when
+# @FirmwareDevice is @kernel.
+#
+# @pathname: Identifies the firmware executable. The firmware executable may be
+#            shared by multiple virtual machine definitions. The corresponding
+#            QEMU command line option is "-kernel @pathname".
+#
+# Since: 2.13
+##
+{ 'struct' : 'FirmwareMappingKernel',
+  'data'   : { 'pathname' : 'str' } }
+
+##
+# @FirmwareMappingMemory:
+#
+# Describes loading and mapping properties for the firmware executable, when
+# @FirmwareDevice is @memory.
+#
+# @pathname: Identifies the firmware executable. The firmware executable may be
+#            shared by multiple virtual machine definitions. The corresponding
+#            QEMU command line option is "-bios @pathname".
+#
+# Since: 2.13
+##
+{ 'struct' : 'FirmwareMappingMemory',
+  'data'   : { 'pathname' : 'str' } }
+
+##
+# @FirmwareMapping:
+#
+# Provides a discriminated structure for firmware to describe its loading /
+# mapping properties.
+#
+# @device: Selects the device type that the firmware must be mapped into.
+#
+# Since: 2.13
+##
+{ 'union'         : 'FirmwareMapping',
+  'base'          : { 'device' : 'FirmwareDevice' },
+  'discriminator' : 'device',
+  'data'          : { 'flash'  : 'FirmwareMappingFlash',
+                      'kernel' : 'FirmwareMappingKernel',
+                      'memory' : 'FirmwareMappingMemory' } }
+
+##
+# @Firmware:
+#
+# Describes a firmware (or a firmware use case) to management software.
+#
+# @description: Provides a human-readable description of the firmware.
+#               Management software may or may not display @description.
+#
+# @type: Exposes the type of the firmware. @type is generally the primary key
+#        for which management software looks when picking a firmware for a new
+#        virtual machine definition.
+#
+# @mapping: Describes the loading / mapping properties of the firmware.
+#
+# @targets: Collects the target architectures (QEMU system emulators) and their
+#           machine types that may execute the firmware.
+#
+# @features: Lists the features that the firmware supports, and the platform
+#            requirements it presents.
+#
+# @tags: A list of auxiliary strings associated with the firmware for which
+#        @description is not approprite, due to the latter's possible exposure
+#        to the end-user. @tags serves development and debugging purposes only,
+#        and management software shall explicitly ignore it.
+#
+# Since: 2.13
+#
+# Examples:
+#
+# {
+#     "description": "SeaBIOS",
+#     "type": "bios",
+#     "mapping": {
+#         "device": "memory",
+#         "pathname": "/usr/share/seabios/bios-256k.bin"
+#     },
+#     "targets": [
+#         {
+#             "architecture": "i386",
+#             "machines": [
+#                 "pc",
+#                 "q35"
+#             ]
+#         },
+#         {
+#             "architecture": "x86_64",
+#             "machines": [
+#                 "pc",
+#                 "q35"
+#             ]
+#         }
+#     ],
+#     "features": [
+#         "acpi-s3",
+#         "acpi-s4"
+#     ],
+#     "tags": [
+#         "CONFIG_BOOTSPLASH=n",
+#         "CONFIG_ROM_SIZE=256",
+#         "CONFIG_USE_SMM=n"
+#     ]
+# }
+#
+# {
+#     "description": "OVMF with SB+SMM, empty varstore",
+#     "type": "uefi",
+#     "mapping": {
+#         "device": "flash",
+#         "executable": {
+#             "pathname": "/usr/share/OVMF/OVMF_CODE.secboot.fd",
+#             "format": "raw"
+#         },
+#         "nvram_template": {
+#             "pathname": "/usr/share/OVMF/OVMF_VARS.fd",
+#             "format": "raw"
+#         }
+#     },
+#     "targets": [
+#         {
+#             "architecture": "x86_64",
+#             "machines": [
+#                 "q35"
+#             ]
+#         }
+#     ],
+#     "features": [
+#         "acpi-s3",
+#         "amd-sev",
+#         "requires-smm",
+#         "secure-boot",
+#         "verbose-dynamic"
+#     ],
+#     "tags": [
+#         "-a IA32",
+#         "-a X64",
+#         "-p OvmfPkg/OvmfPkgIa32X64.dsc",
+#         "-t GCC48",
+#         "-b DEBUG",
+#         "-D SMM_REQUIRE",
+#         "-D SECURE_BOOT_ENABLE",
+#         "-D FD_SIZE_4MB"
+#     ]
+# }
+#
+# {
+#     "description": "OVMF with SB+SMM, SB enabled, MS certs enrolled",
+#     "type": "uefi",
+#     "mapping": {
+#         "device": "flash",
+#         "executable": {
+#             "pathname": "/usr/share/OVMF/OVMF_CODE.secboot.fd",
+#             "format": "raw"
+#         },
+#         "nvram_template": {
+#             "pathname": "/usr/share/OVMF/OVMF_VARS.secboot.fd",
+#             "format": "raw"
+#         }
+#     },
+#     "targets": [
+#         {
+#             "architecture": "x86_64",
+#             "machines": [
+#                 "q35"
+#             ]
+#         }
+#     ],
+#     "features": [
+#         "acpi-s3",
+#         "amd-sev",
+#         "requires-smm",
+#         "secure-boot",
+#         "secure-boot-enrolled-keys",
+#         "verbose-dynamic"
+#     ],
+#     "tags": [
+#         "-a IA32",
+#         "-a X64",
+#         "-p OvmfPkg/OvmfPkgIa32X64.dsc",
+#         "-t GCC48",
+#         "-b DEBUG",
+#         "-D SMM_REQUIRE",
+#         "-D SECURE_BOOT_ENABLE",
+#         "-D FD_SIZE_4MB"
+#     ]
+# }
+#
+# {
+#     "description": "UEFI firmware for ARM64 virtual machines",
+#     "type": "uefi",
+#     "mapping": {
+#         "device": "flash",
+#         "executable": {
+#             "pathname": "/usr/share/AAVMF/AAVMF_CODE.fd",
+#             "format": "raw"
+#         },
+#         "nvram_template": {
+#             "pathname": "/usr/share/AAVMF/AAVMF_VARS.fd",
+#             "format": "raw"
+#         }
+#     },
+#     "targets": [
+#         {
+#             "architecture": "aarch64",
+#             "machines": [
+#                 "virt"
+#             ]
+#         }
+#     ],
+#     "features": [
+#
+#     ],
+#     "tags": [
+#         "-a AARCH64",
+#         "-p ArmVirtPkg/ArmVirtQemu.dsc",
+#         "-t GCC48",
+#         "-b DEBUG",
+#         "-D DEBUG_PRINT_ERROR_LEVEL=0x80000000"
+#     ]
+# }
+##
+{ 'struct' : 'Firmware',
+  'data'   : { 'description' : 'str',
+               'type'        : 'FirmwareType',
+               'mapping'     : 'FirmwareMapping',
+               'targets'     : [ 'FirmwareTarget' ],
+               'features'    : [ 'FirmwareFeature' ],
+               'tags'        : [ 'str' ] } }
+
+##
+# @x-check-firmware:
+#
+# Accept a @Firmware object and do nothing, successfully. This command can be
+# used in the QMP shell to validate @Firmware JSON against the schema.
+#
+# @fw: ignored
+#
+# Since: 2.13
+##
+{ 'command' : 'x-check-firmware',
+  'data'    : { 'fw' : 'Firmware' } }
diff --git a/qapi/qapi-schema.json b/qapi/qapi-schema.json
index 25bce78352b8..2d6339ca8c99 100644
--- a/qapi/qapi-schema.json
+++ b/qapi/qapi-schema.json
@@ -92,4 +92,5 @@
 { 'include': 'transaction.json' }
 { 'include': 'trace.json' }
 { 'include': 'introspect.json' }
+{ 'include': 'firmware.json' }
 { 'include': 'misc.json' }
diff --git a/qmp.c b/qmp.c
index f72261667f92..2141ebe6f027 100644
--- a/qmp.c
+++ b/qmp.c
@@ -34,6 +34,7 @@
 #include "qapi/qapi-commands-block-core.h"
 #include "qapi/qapi-commands-misc.h"
 #include "qapi/qapi-commands-ui.h"
+#include "qapi/qapi-commands-firmware.h"
 #include "qapi/qmp/qdict.h"
 #include "qapi/qmp/qerror.h"
 #include "qapi/qobject-input-visitor.h"
@@ -781,3 +782,7 @@ void qmp_x_oob_test(bool lock, Error **errp)
         qemu_sem_post(&x_oob_test_sem);
     }
 }
+
+void qmp_x_check_firmware(Firmware *fw, Error **errp)
+{
+}
diff --git a/.gitignore b/.gitignore
index 4055e12ee85d..1d8d1066d3d1 100644
--- a/.gitignore
+++ b/.gitignore
@@ -35,6 +35,7 @@
 /qapi/qapi-commands-char.[ch]
 /qapi/qapi-commands-common.[ch]
 /qapi/qapi-commands-crypto.[ch]
+/qapi/qapi-commands-firmware.[ch]
 /qapi/qapi-commands-introspect.[ch]
 /qapi/qapi-commands-migration.[ch]
 /qapi/qapi-commands-misc.[ch]
@@ -52,6 +53,7 @@
 /qapi/qapi-events-char.[ch]
 /qapi/qapi-events-common.[ch]
 /qapi/qapi-events-crypto.[ch]
+/qapi/qapi-events-firmware.[ch]
 /qapi/qapi-events-introspect.[ch]
 /qapi/qapi-events-migration.[ch]
 /qapi/qapi-events-misc.[ch]
@@ -70,6 +72,7 @@
 /qapi/qapi-types-char.[ch]
 /qapi/qapi-types-common.[ch]
 /qapi/qapi-types-crypto.[ch]
+/qapi/qapi-types-firmware.[ch]
 /qapi/qapi-types-introspect.[ch]
 /qapi/qapi-types-migration.[ch]
 /qapi/qapi-types-misc.[ch]
@@ -87,6 +90,7 @@
 /qapi/qapi-visit-char.[ch]
 /qapi/qapi-visit-common.[ch]
 /qapi/qapi-visit-crypto.[ch]
+/qapi/qapi-visit-firmware.[ch]
 /qapi/qapi-visit-introspect.[ch]
 /qapi/qapi-visit-migration.[ch]
 /qapi/qapi-visit-misc.[ch]
-- 
2.14.1.3.gb7cf6e02401b




reply via email to

[Prev in Thread] Current Thread [Next in Thread]