qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [PATCH v1 0/1] xilinx_spips dummy bytes fix


From: Alistair Francis
Subject: Re: [Qemu-devel] [PATCH v1 0/1] xilinx_spips dummy bytes fix
Date: Tue, 17 Apr 2018 08:47:33 -0700

On Tue, Apr 17, 2018 at 7:18 AM, Sai Pavan Boddu
<address@hidden> wrote:
> For zynq-7000 boards, we saw issues when u-boot/linux accessing the qspi.
> Issue is due to wrong dummy byte transfers for few of un-handled commands ex: 
> 0x9F, 0x6, 0xe9, 0x4, 0x18, etc
> There are many unhandled commands which do not require dummy bytes but they 
> can be followed by address cycles.
>
> To fix this issue for above commands, the next upcoming tx bytes are not 
> considered dummies rather sent to slave directly.
>
> Sai Pavan Boddu (1):
>   xilinx_spips: send dummy only if cmd requires it

I don't see this patch on the list, I only see the cover letter.

Do other see it?

Alistair

>
>  hw/ssi/xilinx_spips.c | 13 ++++++++++---
>  1 file changed, 10 insertions(+), 3 deletions(-)
>
> --
> 2.7.4
>
>



reply via email to

[Prev in Thread] Current Thread [Next in Thread]