qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH v3 20/22] target/arm: PMU: Add instruction and cycle


From: Aaron Lindsay
Subject: [Qemu-devel] [PATCH v3 20/22] target/arm: PMU: Add instruction and cycle events
Date: Fri, 16 Mar 2018 16:31:18 -0400

The instruction event is only enabled when icount is used, cycles are
always supported. Always defining get_cycle_count (but altering its
behavior depending on CONFIG_USER_ONLY) allows us to remove some
CONFIG_USER_ONLY #defines throughout the rest of the code.

Signed-off-by: Aaron Lindsay <address@hidden>
---
 target/arm/helper.c | 99 ++++++++++++++++++++++++++++-------------------------
 1 file changed, 52 insertions(+), 47 deletions(-)

diff --git a/target/arm/helper.c b/target/arm/helper.c
index 2fa8308..679897a 100644
--- a/target/arm/helper.c
+++ b/target/arm/helper.c
@@ -15,6 +15,7 @@
 #include "arm_ldst.h"
 #include <zlib.h> /* For crc32 */
 #include "exec/semihost.h"
+#include "sysemu/cpus.h"
 #include "sysemu/kvm.h"
 #include "fpu/softfloat.h"
 
@@ -935,8 +936,54 @@ typedef struct pm_event {
     uint64_t (*get_count)(CPUARMState *, uint64_t cycles);
 } pm_event;
 
+/*
+ * Return the underlying cycle count for the PMU cycle counters. If we're in
+ * usermode, simply return 0.
+ */
+static uint64_t get_cycle_count(CPUARMState *env)
+{
+#ifndef CONFIG_USER_ONLY
+    return muldiv64(qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL),
+                   ARM_CPU_FREQ, NANOSECONDS_PER_SECOND);
+#else
+    return 0;
+#endif
+}
+
+static bool event_always_supported(CPUARMState *env)
+{
+    return true;
+}
+
+#ifndef CONFIG_USER_ONLY
+static uint64_t cycles_get_count(CPUARMState *env, uint64_t cycles)
+{
+    return cycles;
+}
+
+static bool instructions_supported(CPUARMState *env)
+{
+    return use_icount == 1 /* Precise instruction counting */;
+}
+
+static uint64_t instructions_get_count(CPUARMState *env, uint64_t cycles)
+{
+    return (uint64_t)cpu_get_icount_raw();
+}
+#endif
+
 #define SUPPORTED_EVENT_SENTINEL UINT16_MAX
 static const pm_event pm_events[] = {
+#ifndef CONFIG_USER_ONLY
+    { .number = 0x008, /* INST_RETIRED */
+      .supported = instructions_supported,
+      .get_count = instructions_get_count
+    },
+    { .number = 0x011, /* CPU_CYCLES */
+      .supported = event_always_supported,
+      .get_count = cycles_get_count
+    },
+#endif
     { .number = SUPPORTED_EVENT_SENTINEL }
 };
 static uint16_t supported_event_map[0x3f];
@@ -1016,8 +1063,6 @@ static CPAccessResult pmreg_access_swinc(CPUARMState *env,
     return pmreg_access(env, ri, isread);
 }
 
-#ifndef CONFIG_USER_ONLY
-
 static CPAccessResult pmreg_access_selr(CPUARMState *env,
                                         const ARMCPRegInfo *ri,
                                         bool isread)
@@ -1126,11 +1171,7 @@ static inline bool pmu_counter_filtered(CPUARMState 
*env, uint64_t pmxevtyper)
  */
 uint64_t pmccntr_op_start(CPUARMState *env)
 {
-    uint64_t cycles = 0;
-#ifndef CONFIG_USER_ONLY
-    cycles = muldiv64(qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL),
-                          ARM_CPU_FREQ, NANOSECONDS_PER_SECOND);
-#endif
+    uint64_t cycles = get_cycle_count(env);
 
     if (arm_ccnt_enabled(env) &&
           !pmu_counter_filtered(env, env->cp15.pmccfiltr_el0)) {
@@ -1268,26 +1309,6 @@ static void pmccntr_write32(CPUARMState *env, const 
ARMCPRegInfo *ri,
     pmccntr_write(env, ri, deposit64(cur_val, 0, 32, value));
 }
 
-#else /* CONFIG_USER_ONLY */
-
-uint64_t pmccntr_op_start(CPUARMState *env)
-{
-}
-
-void pmccntr_op_finish(CPUARMState *env, uint64_t prev_cycles)
-{
-}
-
-uint64_t pmu_op_start(CPUARMState *env)
-{
-}
-
-void pmu_op_finish(CPUARMState *env, uint64_t prev_cycles)
-{
-}
-
-#endif
-
 static void pmccfiltr_write(CPUARMState *env, const ARMCPRegInfo *ri,
                             uint64_t value)
 {
@@ -1346,11 +1367,7 @@ static void pmevtyper_write(CPUARMState *env, const 
ARMCPRegInfo *ri,
     if (counter == 0x1f) {
         pmccfiltr_write(env, ri, value);
     } else if (counter < PMU_NUM_COUNTERS(env)) {
-        uint64_t cycles = 0;
-#ifndef CONFIG_USER_ONLY
-        cycles = muldiv64(qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL),
-                          ARM_CPU_FREQ, NANOSECONDS_PER_SECOND);
-#endif
+        uint64_t cycles = get_cycle_count(env);
         pmu_sync_counter(env, counter, cycles);
         env->cp15.c14_pmevtyper[counter] = value & 0xfe0003ff;
         pmu_sync_counter(env, counter, cycles);
@@ -1404,11 +1421,7 @@ static void pmevcntr_write(CPUARMState *env, const 
ARMCPRegInfo *ri,
                              uint64_t value, uint8_t counter)
 {
     if (counter < PMU_NUM_COUNTERS(env)) {
-        uint64_t cycles = 0;
-#ifndef CONFIG_USER_ONLY
-        cycles = muldiv64(qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL),
-                          ARM_CPU_FREQ, NANOSECONDS_PER_SECOND);
-#endif
+        uint64_t cycles = get_cycle_count(env);
         env->cp15.c14_pmevcntr[counter] = value;
         pmu_sync_counter(env, counter, cycles);
     }
@@ -1420,12 +1433,8 @@ static uint64_t pmevcntr_read(CPUARMState *env, const 
ARMCPRegInfo *ri,
                               uint8_t counter)
 {
     if (counter < PMU_NUM_COUNTERS(env)) {
-        uint64_t ret;
-        uint64_t cycles = 0;
-#ifndef CONFIG_USER_ONLY
-        cycles = muldiv64(qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL),
-                          ARM_CPU_FREQ, NANOSECONDS_PER_SECOND);
-#endif
+        uint64_t ret, cycles;
+        cycles = get_cycle_count(env);
         pmu_sync_counter(env, counter, cycles);
         ret = env->cp15.c14_pmevcntr[counter];
         pmu_sync_counter(env, counter, cycles);
@@ -1613,7 +1622,6 @@ static const ARMCPRegInfo v7_cp_reginfo[] = {
     /* Unimplemented so WI. */
     { .name = "PMSWINC", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 4,
       .access = PL0_W, .accessfn = pmreg_access_swinc, .type = ARM_CP_NOP },
-#ifndef CONFIG_USER_ONLY
     { .name = "PMSELR", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 5,
       .access = PL0_RW, .type = ARM_CP_ALIAS,
       .fieldoffset = offsetoflow32(CPUARMState, cp15.c9_pmselr),
@@ -1633,7 +1641,6 @@ static const ARMCPRegInfo v7_cp_reginfo[] = {
       .access = PL0_RW, .accessfn = pmreg_access_ccntr,
       .type = ARM_CP_IO,
       .readfn = pmccntr_read, .writefn = pmccntr_write, },
-#endif
     { .name = "PMCCFILTR", .cp = 15, .opc1 = 0, .crn = 14, .crm = 15, .opc2 = 
7,
       .writefn = pmccfiltr_write_a32, .readfn = pmccfiltr_read_a32,
       .access = PL0_RW, .accessfn = pmreg_access,
@@ -5171,7 +5178,6 @@ void register_cp_regs_for_features(ARMCPU *cpu)
          * field as main ID register, and we implement only the cycle
          * count register.
          */
-#ifndef CONFIG_USER_ONLY
         ARMCPRegInfo pmcr = {
             .name = "PMCR", .cp = 15, .crn = 9, .crm = 12, .opc1 = 0, .opc2 = 
0,
             .access = PL0_RW,
@@ -5225,7 +5231,6 @@ void register_cp_regs_for_features(ARMCPU *cpu)
             g_free(pmevtyper_name);
             g_free(pmevtyper_el0_name);
         }
-#endif
         ARMCPRegInfo clidr = {
             .name = "CLIDR", .state = ARM_CP_STATE_BOTH,
             .opc0 = 3, .crn = 0, .crm = 0, .opc1 = 1, .opc2 = 1,
-- 
Qualcomm Datacenter Technologies as an affiliate of Qualcomm Technologies, Inc.
Qualcomm Technologies, Inc. is a member of the
Code Aurora Forum, a Linux Foundation Collaborative Project.




reply via email to

[Prev in Thread] Current Thread [Next in Thread]