[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH v3] qemu-doc: Rework the network options chapter to
|
From: |
Thomas Huth |
|
Subject: |
[Qemu-devel] [PATCH v3] qemu-doc: Rework the network options chapter to make "-net" less prominent |
|
Date: |
Mon, 12 Mar 2018 13:20:50 +0100 |
"-net" is clearly a legacy option. Yet we still use it in almost all
examples in the qemu documentation, and many other spots in the network
chapter. We should make it less prominent that users are not lured into
using it so often anymore. So instead of starting the network chapter with
"-net nic" and documenting "-net <backend>" below "-netdev <backend>"
everywhere, all the "-net" related documentation is now moved to the end
of the chapter. The new "-nic" option is moved to the beginning of the
chapter instead, with a new example that should demonstrate how "-nic"
can be used to shortcut "-device" with "-netdev". The examples in this
chapter are changed to use the "-device" and "-netdev" options or
"-nic" instead of "-net nic -net <backend>".
While we're at it, also remove a legacy remark about very old Linux
distributions. Also remove the "[...]" from the examples in this chapter
since we are not using this ellipsis in any other examples in our docu-
mentation.
Signed-off-by: Thomas Huth <address@hidden>
---
v3:
- Use single dash options instead of double-dash options
qemu-options.hx | 189 ++++++++++++++++++++++++++++----------------------------
1 file changed, 94 insertions(+), 95 deletions(-)
diff --git a/qemu-options.hx b/qemu-options.hx
index 6585058..e86b3fb 100644
--- a/qemu-options.hx
+++ b/qemu-options.hx
@@ -2045,41 +2045,40 @@ DEF("net", HAS_ARG, QEMU_OPTION_net,
" old way to initialize a host network interface\n"
" (use the -netdev option if possible instead)\n",
QEMU_ARCH_ALL)
STEXI
address@hidden -net
nic[,address@hidden,address@hidden,address@hidden,address@hidden
[,address@hidden,address@hidden,address@hidden
address@hidden -net
-Configure or create an on-board (or machine default) Network Interface Card
-(NIC) and connect it either to VLAN @var{n} (@var{n} = 0 is the default), or
-to the netdev @var{nd}. The NIC is an e1000 by default on the PC
-target. Optionally, the MAC address can be changed to @var{mac}, the
-device address set to @var{addr} (PCI cards only),
-and a @var{name} can be assigned for use in monitor commands.
-Optionally, for PCI cards, you can specify the number @var{v} of MSI-X vectors
-that the card should have; this option currently only affects virtio cards; set
address@hidden = 0 to disable MSI-X. If no @option{-net} option is specified, a
single
-NIC is created. QEMU can emulate several different models of network card.
-Valid values for @var{type} are
address@hidden, @code{i82551}, @code{i82557b}, @code{i82559er},
address@hidden, @code{ne2k_isa}, @code{pcnet}, @code{rtl8139},
address@hidden, @code{smc91c111}, @code{lance} and @code{mcf_fec}.
-Not all devices are supported on all targets. Use @code{-net nic,model=help}
-for a list of available devices for your target.
address@hidden -nic
[tap|bridge|user|l2tpv3|vde|netmap|vhost-user|socket][,...][,mac=macaddr][,model=mn]
address@hidden -nic
+This option is a shortcut for configuring both the on-board (default) guest
+NIC hardware and the host network backend in one go. The host backend options
+are the same as with the corresponding @option{-netdev} options below.
+The guest NIC model can be set with @address@hidden
+Use @option{model=help} to list the available device types.
+The hardware MAC address can be set with @address@hidden
+
+The following two example do exactly the same, to show how @option{-nic} can
+be used to shorten the command line length (note that the e1000 is the default
+on i386, so the @option{model=e1000} parameter could even be omitted here,
too):
address@hidden
+qemu-system-i386 -netdev user,id=n1,ipv6=off -device
e1000,netdev=n1,mac=52:54:98:76:54:32
+qemu-system-i386 -nic user,ipv6=off,model=e1000,mac=52:54:98:76:54:32
address@hidden example
+
address@hidden -nic none
+Indicate that no network devices should be configured. It is used to override
+the default configuration (default NIC with ``user'' host network backend)
+which is activated if no other networking options are provided.
@item -netdev user,address@hidden,@var{option}][,@var{option}][,...]
@findex -netdev
address@hidden -net user[,@var{option}][,@var{option}][,...]
-Use the user mode network stack which requires no administrator
+Configure user mode host network backend which requires no administrator
privilege to run. Valid options are:
@table @option
address@hidden address@hidden
-Connect user mode stack to VLAN @var{n} (@var{n} = 0 is the default).
-
@item address@hidden
address@hidden address@hidden
Assign symbolic name for use in monitor commands.
address@hidden and @option{ipv6} specify that either IPv4 or IPv6 must
-be enabled. If neither is specified both protocols are enabled.
address@hidden ipv4=on|off and ipv6=on|off
+Specify that either IPv4 or IPv6 must be enabled. If neither is specified
+both protocols are enabled.
@item address@hidden/@var{mask}]
Set IP network address the guest will see. Optionally specify the netmask,
@@ -2131,7 +2130,7 @@ can not be resolved.
Example:
@example
-qemu -net user,dnssearch=mgmt.example.org,dnssearch=example.org [...]
+qemu-system-i386 -nic user,dnssearch=mgmt.example.org,dnssearch=example.org
@end example
@item address@hidden
@@ -2147,7 +2146,8 @@ a guest from a local directory.
Example (using pxelinux):
@example
-qemu-system-i386 -hda linux.img -boot n -net
user,tftp=/path/to/tftp/files,bootfile=/pxelinux.0
+qemu-system-i386 -hda linux.img -boot n -device e1000,netdev=n1 \
+ -netdev user,id=n1,tftp=/path/to/tftp/files,bootfile=/pxelinux.0
@end example
@item address@hidden,address@hidden
@@ -2166,8 +2166,6 @@ or @file{C:\WINNT\SYSTEM32\DRIVERS\ETC\LMHOSTS} (Windows
NT/2000).
Then @address@hidden can be accessed in @file{\\smbserver\qemu}.
Note that a SAMBA server must be installed on the host OS.
-QEMU was tested successfully with smbd versions from Red Hat 9,
-Fedora Core 3 and OpenSUSE 11.x.
@item hostfwd=[tcp|udp]:address@hidden:@address@hidden:@var{guestport}
Redirect incoming TCP or UDP connections to the host port @var{hostport} to
@@ -2182,7 +2180,7 @@ screen 0, use the following:
@example
# on the host
-qemu-system-i386 -net user,hostfwd=tcp:127.0.0.1:6001-:6000 [...]
+qemu-system-i386 -nic user,hostfwd=tcp:127.0.0.1:6001-:6000
# this host xterm should open in the guest X11 server
xterm -display :1
@end example
@@ -2192,7 +2190,7 @@ the guest, use the following:
@example
# on the host
-qemu-system-i386 -net user,hostfwd=tcp::5555-:23 [...]
+qemu-system-i386 -nic user,hostfwd=tcp::5555-:23
telnet localhost 5555
@end example
@@ -2211,7 +2209,7 @@ lifetime, like in the following example:
@example
# open 10.10.1.1:4321 on bootup, connect 10.0.2.100:1234 to it whenever
# the guest accesses it
-qemu -net user,guestfwd=tcp:10.0.2.100:1234-tcp:10.10.1.1:4321 [...]
+qemu-system-i386 -nic user,guestfwd=tcp:10.0.2.100:1234-tcp:10.10.1.1:4321
@end example
Or you can execute a command on every TCP connection established by the guest,
@@ -2220,7 +2218,7 @@ so that QEMU behaves similar to an inetd process for that
virtual server:
@example
# call "netcat 10.10.1.1 4321" on every TCP connection to 10.0.2.100:1234
# and connect the TCP stream to its stdin/stdout
-qemu -net 'user,guestfwd=tcp:10.0.2.100:1234-cmd:netcat 10.10.1.1 4321'
+qemu-system-i386 -nic 'user,id=n1,guestfwd=tcp:10.0.2.100:1234-cmd:netcat
10.10.1.1 4321'
@end example
@end table
@@ -2231,8 +2229,7 @@ syntax gives undefined results. Their use for new
applications is discouraged
as they will be removed from future versions.
@item -netdev
tap,address@hidden,address@hidden,address@hidden,address@hidden,address@hidden,address@hidden,address@hidden
address@hidden -net
tap[,address@hidden,address@hidden,address@hidden,address@hidden,address@hidden,address@hidden,address@hidden,address@hidden
-Connect the host TAP network interface @var{name} to VLAN @var{n}.
+Configure a host TAP network backend with ID @var{id}.
Use the network script @var{file} to configure it and the network script
@var{dfile} to deconfigure it. If @var{name} is not provided, the OS
@@ -2253,7 +2250,7 @@ Examples:
@example
#launch a QEMU instance with the default network script
-qemu-system-i386 linux.img -net nic -net tap
+qemu-system-i386 linux.img -nic tap
@end example
@example
@@ -2267,12 +2264,11 @@ qemu-system-i386 linux.img \
@example
#launch a QEMU instance with the default network helper to
#connect a TAP device to bridge br0
-qemu-system-i386 linux.img \
- -net nic -net tap,"helper=/path/to/qemu-bridge-helper"
+qemu-system-i386 linux.img -device virtio-net-pci,netdev=n1 \
+ -netdev tap,id=n1,"helper=/path/to/qemu-bridge-helper"
@end example
@item -netdev bridge,address@hidden,address@hidden,address@hidden
address@hidden -net
bridge[,address@hidden,address@hidden,address@hidden,address@hidden
Connect a host TAP network interface to a host bridge device.
Use the network helper @var{helper} to configure the TAP interface and
@@ -2285,21 +2281,20 @@ Examples:
@example
#launch a QEMU instance with the default network helper to
#connect a TAP device to bridge br0
-qemu-system-i386 linux.img -net bridge -net nic,model=virtio
+qemu-system-i386 linux.img -netdev bridge,id=n1 -device virtio-net,netdev=n1
@end example
@example
#launch a QEMU instance with the default network helper to
#connect a TAP device to bridge qemubr0
-qemu-system-i386 linux.img -net bridge,br=qemubr0 -net nic,model=virtio
+qemu-system-i386 linux.img -netdev bridge,br=qemubr0,id=n1 -device
virtio-net,netdev=n1
@end example
@item -netdev
socket,address@hidden,address@hidden,address@hidden:@var{port}][,address@hidden:@var{port}]
address@hidden -net socket[,address@hidden,address@hidden,address@hidden
[,address@hidden:@var{port}][,address@hidden:@var{port}]
-Connect the VLAN @var{n} to a remote VLAN in another QEMU virtual
-machine using a TCP socket connection. If @option{listen} is
-specified, QEMU waits for incoming connections on @var{port}
+This host network backend can be used to connect the guest's network to
+another QEMU virtual machine using a TCP socket connection. If @option{listen}
+is specified, QEMU waits for incoming connections on @var{port}
(@var{host} is optional). @option{connect} is used to connect to
another QEMU instance using the @option{listen} option. @address@hidden
specifies an already opened TCP socket.
@@ -2308,21 +2303,19 @@ Example:
@example
# launch a first QEMU instance
qemu-system-i386 linux.img \
- -net nic,macaddr=52:54:00:12:34:56 \
- -net socket,listen=:1234
-# connect the VLAN 0 of this instance to the VLAN 0
-# of the first instance
+ -device e1000,netdev=n1,mac=52:54:00:12:34:56 \
+ -netdev socket,id=n1,listen=:1234
+# connect the network of this instance to the network of the first instance
qemu-system-i386 linux.img \
- -net nic,macaddr=52:54:00:12:34:57 \
- -net socket,connect=127.0.0.1:1234
+ -device e1000,netdev=n2,mac=52:54:00:12:34:57 \
+ -netdev socket,id=n2,connect=127.0.0.1:1234
@end example
@item -netdev
socket,address@hidden,address@hidden,address@hidden:@var{port}[,address@hidden
address@hidden -net
socket[,address@hidden,address@hidden,address@hidden,address@hidden:@var{port}[,address@hidden
-Create a VLAN @var{n} shared with another QEMU virtual
-machines using a UDP multicast socket, effectively making a bus for
-every QEMU with same multicast address @var{maddr} and @var{port}.
+Configure a socket host network backend to share the guest's network traffic
+with another QEMU virtual machines using a UDP multicast socket, effectively
+making a bus for every QEMU with same multicast address @var{maddr} and
@var{port}.
NOTES:
@enumerate
@item
@@ -2339,25 +2332,24 @@ Example:
@example
# launch one QEMU instance
qemu-system-i386 linux.img \
- -net nic,macaddr=52:54:00:12:34:56 \
- -net socket,mcast=230.0.0.1:1234
+ -device e1000,netdev=n1,mac=52:54:00:12:34:56 \
+ -netdev socket,id=n1,mcast=230.0.0.1:1234
# launch another QEMU instance on same "bus"
qemu-system-i386 linux.img \
- -net nic,macaddr=52:54:00:12:34:57 \
- -net socket,mcast=230.0.0.1:1234
+ -device e1000,netdev=n2,mac=52:54:00:12:34:57 \
+ -netdev socket,id=n2,mcast=230.0.0.1:1234
# launch yet another QEMU instance on same "bus"
qemu-system-i386 linux.img \
- -net nic,macaddr=52:54:00:12:34:58 \
- -net socket,mcast=230.0.0.1:1234
+ -device e1000,netdev=n3,macaddr=52:54:00:12:34:58 \
+ -netdev socket,id=n3,mcast=230.0.0.1:1234
@end example
Example (User Mode Linux compat.):
@example
-# launch QEMU instance (note mcast address selected
-# is UML's default)
+# launch QEMU instance (note mcast address selected is UML's default)
qemu-system-i386 linux.img \
- -net nic,macaddr=52:54:00:12:34:56 \
- -net socket,mcast=239.192.168.1:1102
+ -device e1000,netdev=n1,mac=52:54:00:12:34:56 \
+ -netdev socket,id=n1,mcast=239.192.168.1:1102
# launch UML
/path/to/linux ubd0=/path/to/root_fs eth0=mcast
@end example
@@ -2365,14 +2357,13 @@ qemu-system-i386 linux.img \
Example (send packets from host's 1.2.3.4):
@example
qemu-system-i386 linux.img \
- -net nic,macaddr=52:54:00:12:34:56 \
- -net socket,mcast=239.192.168.1:1102,localaddr=1.2.3.4
+ -device e1000,netdev=n1,mac=52:54:00:12:34:56 \
+ -netdev
socket,id=n1,mcast=239.192.168.1:1102,localaddr=1.2.3.4
@end example
@item -netdev
l2tpv3,address@hidden,address@hidden,address@hidden,address@hidden,address@hidden,address@hidden,address@hidden,ipv6][,udp][,cookie64][,counter][,pincounter][,address@hidden,address@hidden,address@hidden
address@hidden -net
l2tpv3[,address@hidden,address@hidden,address@hidden,address@hidden,address@hidden,address@hidden,address@hidden,address@hidden,ipv6][,udp][,cookie64][,counter][,pincounter][,address@hidden,address@hidden,address@hidden
-Connect VLAN @var{n} to L2TPv3 pseudowire. L2TPv3 (RFC3391) is a popular
-protocol to transport Ethernet (and other Layer 2) data frames between
+Configure a L2TPv3 pseudowire host network backend. L2TPv3 (RFC3391) is a
+popular protocol to transport Ethernet (and other Layer 2) data frames between
two systems. It is present in routers, firewalls and the Linux kernel
(from version 3.3 onwards).
@@ -2425,14 +2416,13 @@ brctl addif br-lan vmtunnel0
# on 4.3.2.1
# launch QEMU instance - if your network has reorder or is very lossy add
,pincounter
-qemu-system-i386 linux.img -net nic -net
l2tpv3,src=4.2.3.1,dst=1.2.3.4,udp,srcport=16384,dstport=16384,rxsession=0xffffffff,txsession=0xffffffff,counter
-
+qemu-system-i386 linux.img -device e1000,netdev=n1 \
+ -netdev
l2tpv3,id=n1,src=4.2.3.1,dst=1.2.3.4,udp,srcport=16384,dstport=16384,rxsession=0xffffffff,txsession=0xffffffff,counter
@end example
@item -netdev
vde,address@hidden,address@hidden,address@hidden,address@hidden,address@hidden
address@hidden -net vde[,address@hidden,address@hidden,address@hidden
[,address@hidden,address@hidden,address@hidden
-Connect VLAN @var{n} to PORT @var{n} of a vde switch running on host and
+Configure VDE backend to connect to PORT @var{n} of a vde switch running on
host and
listening for incoming connections on @var{socketpath}. Use GROUP
@var{groupname}
and MODE @var{octalmode} to change default ownership and permissions for
communication port. This option is only available if QEMU has been compiled
@@ -2443,19 +2433,9 @@ Example:
# launch vde switch
vde_switch -F -sock /tmp/myswitch
# launch QEMU instance
-qemu-system-i386 linux.img -net nic -net vde,sock=/tmp/myswitch
+qemu-system-i386 linux.img -nic vde,sock=/tmp/myswitch
@end example
address@hidden -netdev hubport,address@hidden,address@hidden,address@hidden
-
-Create a hub port on QEMU "vlan" @var{hubid}.
-
-The hubport netdev lets you connect a NIC to a QEMU "vlan" instead of a single
-netdev. @code{-net} and @code{-device} with parameter @option{vlan} create the
-required hub automatically. Alternatively, you can also connect the hubport
-to another netdev with ID @var{nd} by using the @address@hidden
-option.
-
@item -netdev vhost-user,address@hidden,vhostforce=on|off][,queues=n]
Establish a vhost-user netdev, backed by a chardev @var{id}. The chardev should
@@ -2474,17 +2454,36 @@ qemu -m 512 -object
memory-backend-file,id=mem,size=512M,mem-path=/hugetlbfs,sha
-device virtio-net-pci,netdev=net0
@end example
address@hidden --nic
[tap|bridge|user|l2tpv3|vde|netmap|vhost-user|socket][,...][,mac=macaddr]
address@hidden -netdev hubport,address@hidden,address@hidden,address@hidden
-This option is a shortcut for setting both, the on-board (default) guest NIC
-hardware and the host network backend in one go. The host backend options are
-the same as with the corresponding @option{--netdev} option. The guest NIC
-hardware MAC address can be set with @address@hidden
+Create a hub port on the emulated hub with ID @var{hubid}.
address@hidden --nic none
-Indicate that no network devices should be configured. It is used to override
-the default configuration (default NIC with @option{--net user} backend) which
-is activated if no other networking options are provided.
+The hubport netdev lets you connect a NIC to a QEMU emulated hub instead of a
+single netdev. @code{-net} and @code{-device} with the parameter @option{vlan}
+(deprecated), or @code{-nic hubport} can also be used to connect a
+network device or a NIC to a hub. Alternatively, you can also connect the
+hubport to another netdev with ID @var{nd} by using the @address@hidden
+option.
+
address@hidden -net
nic[,address@hidden,address@hidden,address@hidden,address@hidden
[,address@hidden,address@hidden,address@hidden
address@hidden -net
+Legacy option to configure or create an on-board (or machine default) Network
+Interface Card(NIC) and connect it either to the emulated hub port ("vlan")
+with number @var{n} (@var{n} = 0 is the default), or to the netdev @var{nd}.
+The NIC is an e1000 by default on the PC target. Optionally, the MAC address
+can be changed to @var{mac}, the device address set to @var{addr} (PCI cards
+only), and a @var{name} can be assigned for use in monitor commands.
+Optionally, for PCI cards, you can specify the number @var{v} of MSI-X vectors
+that the card should have; this option currently only affects virtio cards; set
address@hidden = 0 to disable MSI-X. If no @option{-net} option is specified, a
single
+NIC is created. QEMU can emulate several different models of network card.
+Use @code{-net nic,model=help} for a list of available devices for your target.
+
address@hidden -net
user|tap|bridge|socket|l2tpv3|vde[,...][,address@hidden,address@hidden
+Configure a host network backend (with the options corresponding to the same
address@hidden option) and connect it to the emulated hub ("vlan") with the
+number @var{n} (default is number 0). Use @var{name} to specify the name of the
+hub port.
ETEXI
STEXI
--
1.8.3.1
- [Qemu-devel] [PATCH v3] qemu-doc: Rework the network options chapter to make "-net" less prominent,
Thomas Huth <=