[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH v7 09/23] migration: new state "postcopy-recover"
From: |
Peter Xu |
Subject: |
[Qemu-devel] [PATCH v7 09/23] migration: new state "postcopy-recover" |
Date: |
Fri, 9 Mar 2018 17:15:21 +0800 |
Introducing new migration state "postcopy-recover". If a migration
procedure is paused and the connection is rebuilt afterward
successfully, we'll switch the source VM state from "postcopy-paused" to
the new state "postcopy-recover", then we'll do the resume logic in the
migration thread (along with the return path thread).
This patch only do the state switch on source side. Another following up
patch will handle the state switching on destination side using the same
status bit.
Reviewed-by: Dr. David Alan Gilbert <address@hidden>
Signed-off-by: Peter Xu <address@hidden>
---
migration/migration.c | 76 ++++++++++++++++++++++++++++++++++++++-------------
qapi/migration.json | 4 ++-
2 files changed, 60 insertions(+), 20 deletions(-)
diff --git a/migration/migration.c b/migration/migration.c
index 0b31468552..322d5ad79b 100644
--- a/migration/migration.c
+++ b/migration/migration.c
@@ -561,6 +561,7 @@ static bool migration_is_setup_or_active(int state)
case MIGRATION_STATUS_ACTIVE:
case MIGRATION_STATUS_POSTCOPY_ACTIVE:
case MIGRATION_STATUS_POSTCOPY_PAUSED:
+ case MIGRATION_STATUS_POSTCOPY_RECOVER:
case MIGRATION_STATUS_SETUP:
case MIGRATION_STATUS_PRE_SWITCHOVER:
case MIGRATION_STATUS_DEVICE:
@@ -641,6 +642,7 @@ MigrationInfo *qmp_query_migrate(Error **errp)
case MIGRATION_STATUS_PRE_SWITCHOVER:
case MIGRATION_STATUS_DEVICE:
case MIGRATION_STATUS_POSTCOPY_PAUSED:
+ case MIGRATION_STATUS_POSTCOPY_RECOVER:
/* TODO add some postcopy stats */
info->has_status = true;
info->has_total_time = true;
@@ -2247,6 +2249,13 @@ typedef enum MigThrError {
MIG_THR_ERR_FATAL = 2,
} MigThrError;
+/* Return zero if success, or <0 for error */
+static int postcopy_do_resume(MigrationState *s)
+{
+ /* TODO: do the resume logic */
+ return 0;
+}
+
/*
* We don't return until we are in a safe state to continue current
* postcopy migration. Returns MIG_THR_ERR_RECOVERED if recovered, or
@@ -2255,29 +2264,55 @@ typedef enum MigThrError {
static MigThrError postcopy_pause(MigrationState *s)
{
assert(s->state == MIGRATION_STATUS_POSTCOPY_ACTIVE);
- migrate_set_state(&s->state, MIGRATION_STATUS_POSTCOPY_ACTIVE,
- MIGRATION_STATUS_POSTCOPY_PAUSED);
- /* Current channel is possibly broken. Release it. */
- assert(s->to_dst_file);
- qemu_file_shutdown(s->to_dst_file);
- qemu_fclose(s->to_dst_file);
- s->to_dst_file = NULL;
+ while (true) {
+ migrate_set_state(&s->state, s->state,
+ MIGRATION_STATUS_POSTCOPY_PAUSED);
- error_report("Detected IO failure for postcopy. "
- "Migration paused.");
+ /* Current channel is possibly broken. Release it. */
+ assert(s->to_dst_file);
+ qemu_file_shutdown(s->to_dst_file);
+ qemu_fclose(s->to_dst_file);
+ s->to_dst_file = NULL;
- /*
- * We wait until things fixed up. Then someone will setup the
- * status back for us.
- */
- while (s->state == MIGRATION_STATUS_POSTCOPY_PAUSED) {
- qemu_sem_wait(&s->postcopy_pause_sem);
- }
+ error_report("Detected IO failure for postcopy. "
+ "Migration paused.");
- trace_postcopy_pause_continued();
+ /*
+ * We wait until things fixed up. Then someone will setup the
+ * status back for us.
+ */
+ while (s->state == MIGRATION_STATUS_POSTCOPY_PAUSED) {
+ qemu_sem_wait(&s->postcopy_pause_sem);
+ }
+
+ if (s->state == MIGRATION_STATUS_POSTCOPY_RECOVER) {
+ /* Woken up by a recover procedure. Give it a shot */
- return MIG_THR_ERR_RECOVERED;
+ /*
+ * Firstly, let's wake up the return path now, with a new
+ * return path channel.
+ */
+ qemu_sem_post(&s->postcopy_pause_rp_sem);
+
+ /* Do the resume logic */
+ if (postcopy_do_resume(s) == 0) {
+ /* Let's continue! */
+ trace_postcopy_pause_continued();
+ return MIG_THR_ERR_RECOVERED;
+ } else {
+ /*
+ * Something wrong happened during the recovery, let's
+ * pause again. Pause is always better than throwing
+ * data away.
+ */
+ continue;
+ }
+ } else {
+ /* This is not right... Time to quit. */
+ return MIG_THR_ERR_FATAL;
+ }
+ }
}
static MigThrError migration_detect_error(MigrationState *s)
@@ -2597,7 +2632,10 @@ void migrate_fd_connect(MigrationState *s, Error
*error_in)
}
if (resume) {
- /* TODO: do the resume logic */
+ /* Wakeup the main migration thread to do the recovery */
+ migrate_set_state(&s->state, MIGRATION_STATUS_POSTCOPY_PAUSED,
+ MIGRATION_STATUS_POSTCOPY_RECOVER);
+ qemu_sem_post(&s->postcopy_pause_sem);
return;
}
diff --git a/qapi/migration.json b/qapi/migration.json
index 11e0736f67..152fb8e51e 100644
--- a/qapi/migration.json
+++ b/qapi/migration.json
@@ -91,6 +91,8 @@
#
# @postcopy-paused: during postcopy but paused. (since 2.12)
#
+# @postcopy-recover: trying to recover from a paused postcopy. (since 2.11)
+#
# @completed: migration is finished.
#
# @failed: some error occurred during migration process.
@@ -109,7 +111,7 @@
{ 'enum': 'MigrationStatus',
'data': [ 'none', 'setup', 'cancelling', 'cancelled',
'active', 'postcopy-active', 'postcopy-paused',
- 'completed', 'failed', 'colo',
+ 'postcopy-recover', 'completed', 'failed', 'colo',
'pre-switchover', 'device' ] }
##
--
2.14.3
- [Qemu-devel] [PATCH v7 01/23] migration: let incoming side use thread context, (continued)
- [Qemu-devel] [PATCH v7 01/23] migration: let incoming side use thread context, Peter Xu, 2018/03/09
- [Qemu-devel] [PATCH v7 03/23] migration: implement "postcopy-pause" src logic, Peter Xu, 2018/03/09
- [Qemu-devel] [PATCH v7 04/23] migration: allow dst vm pause on postcopy, Peter Xu, 2018/03/09
- [Qemu-devel] [PATCH v7 02/23] migration: new postcopy-pause state, Peter Xu, 2018/03/09
- [Qemu-devel] [PATCH v7 05/23] migration: allow src return path to pause, Peter Xu, 2018/03/09
- [Qemu-devel] [PATCH v7 06/23] migration: allow fault thread to pause, Peter Xu, 2018/03/09
- [Qemu-devel] [PATCH v7 07/23] qmp: hmp: add migrate "resume" option, Peter Xu, 2018/03/09
- [Qemu-devel] [PATCH v7 08/23] migration: rebuild channel on source, Peter Xu, 2018/03/09
- [Qemu-devel] [PATCH v7 10/23] migration: wakeup dst ram-load-thread for recover, Peter Xu, 2018/03/09
- [Qemu-devel] [PATCH v7 09/23] migration: new state "postcopy-recover",
Peter Xu <=
- [Qemu-devel] [PATCH v7 11/23] migration: new cmd MIG_CMD_RECV_BITMAP, Peter Xu, 2018/03/09
- [Qemu-devel] [PATCH v7 14/23] migration: new message MIG_RP_MSG_RESUME_ACK, Peter Xu, 2018/03/09
- [Qemu-devel] [PATCH v7 12/23] migration: new message MIG_RP_MSG_RECV_BITMAP, Peter Xu, 2018/03/09
- [Qemu-devel] [PATCH v7 13/23] migration: new cmd MIG_CMD_POSTCOPY_RESUME, Peter Xu, 2018/03/09
- [Qemu-devel] [PATCH v7 15/23] migration: introduce SaveVMHandlers.resume_prepare, Peter Xu, 2018/03/09
- [Qemu-devel] [PATCH v7 16/23] migration: synchronize dirty bitmap for resume, Peter Xu, 2018/03/09
- [Qemu-devel] [PATCH v7 17/23] migration: setup ramstate for resume, Peter Xu, 2018/03/09