[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH 3/6] null: Switch to byte-based read/write
From: |
Eric Blake |
Subject: |
[Qemu-devel] [PATCH 3/6] null: Switch to byte-based read/write |
Date: |
Thu, 15 Feb 2018 13:28:26 -0600 |
We are gradually moving away from sector-based interfaces, towards
byte-based. Make the change for the last few sector-based callbacks
in the null-co and null-aio drivers.
Note that since the null driver does nothing on writes, it trivially
supports the BDRV_REQ_FUA flag (all writes have already landed to
the same bit-bucket without needing an extra flush call). Furthermore,
bdrv_refresh_limits() defaults the block size to 512 for any driver
that does not support coroutines; while this is still correct for the
other aio-based drivers, the null driver does just as well with
byte-based requests, and being explicit means we can avoid cycles
wasted on read-modify-write.
Signed-off-by: Eric Blake <address@hidden>
---
block/null.c | 66 ++++++++++++++++++++++++++++++++++--------------------------
1 file changed, 37 insertions(+), 29 deletions(-)
diff --git a/block/null.c b/block/null.c
index 806a8631e4d..2381090dfcf 100644
--- a/block/null.c
+++ b/block/null.c
@@ -93,6 +93,7 @@ static int null_file_open(BlockDriverState *bs, QDict
*options, int flags,
}
s->read_zeroes = qemu_opt_get_bool(opts, NULL_OPT_ZEROES, false);
qemu_opts_del(opts);
+ bs->supported_write_flags = BDRV_REQ_FUA;
return ret;
}
@@ -116,22 +117,22 @@ static coroutine_fn int null_co_common(BlockDriverState
*bs)
return 0;
}
-static coroutine_fn int null_co_readv(BlockDriverState *bs,
- int64_t sector_num, int nb_sectors,
- QEMUIOVector *qiov)
+static coroutine_fn int null_co_preadv(BlockDriverState *bs,
+ uint64_t offset, uint64_t bytes,
+ QEMUIOVector *qiov, int flags)
{
BDRVNullState *s = bs->opaque;
if (s->read_zeroes) {
- qemu_iovec_memset(qiov, 0, 0, nb_sectors * BDRV_SECTOR_SIZE);
+ qemu_iovec_memset(qiov, 0, 0, bytes);
}
return null_co_common(bs);
}
-static coroutine_fn int null_co_writev(BlockDriverState *bs,
- int64_t sector_num, int nb_sectors,
- QEMUIOVector *qiov)
+static coroutine_fn int null_co_pwritev(BlockDriverState *bs,
+ uint64_t offset, uint64_t bytes,
+ QEMUIOVector *qiov, int flags)
{
return null_co_common(bs);
}
@@ -186,26 +187,26 @@ static inline BlockAIOCB
*null_aio_common(BlockDriverState *bs,
return &acb->common;
}
-static BlockAIOCB *null_aio_readv(BlockDriverState *bs,
- int64_t sector_num, QEMUIOVector *qiov,
- int nb_sectors,
- BlockCompletionFunc *cb,
- void *opaque)
-{
- BDRVNullState *s = bs->opaque;
-
- if (s->read_zeroes) {
- qemu_iovec_memset(qiov, 0, 0, nb_sectors * BDRV_SECTOR_SIZE);
- }
-
- return null_aio_common(bs, cb, opaque);
-}
-
-static BlockAIOCB *null_aio_writev(BlockDriverState *bs,
- int64_t sector_num, QEMUIOVector *qiov,
- int nb_sectors,
+static BlockAIOCB *null_aio_preadv(BlockDriverState *bs,
+ uint64_t offset, uint64_t bytes,
+ QEMUIOVector *qiov, int flags,
BlockCompletionFunc *cb,
void *opaque)
+{
+ BDRVNullState *s = bs->opaque;
+
+ if (s->read_zeroes) {
+ qemu_iovec_memset(qiov, 0, 0, bytes);
+ }
+
+ return null_aio_common(bs, cb, opaque);
+}
+
+static BlockAIOCB *null_aio_pwritev(BlockDriverState *bs,
+ uint64_t offset, uint64_t bytes,
+ QEMUIOVector *qiov, int flags,
+ BlockCompletionFunc *cb,
+ void *opaque)
{
return null_aio_common(bs, cb, opaque);
}
@@ -256,6 +257,11 @@ static void null_refresh_filename(BlockDriverState *bs,
QDict *opts)
bs->full_open_options = opts;
}
+static void null_refresh_limits(BlockDriverState *bs, Error **errp)
+{
+ bs->bl.request_alignment = 1;
+}
+
static BlockDriver bdrv_null_co = {
.format_name = "null-co",
.protocol_name = "null-co",
@@ -266,14 +272,15 @@ static BlockDriver bdrv_null_co = {
.bdrv_close = null_close,
.bdrv_getlength = null_getlength,
- .bdrv_co_readv = null_co_readv,
- .bdrv_co_writev = null_co_writev,
+ .bdrv_co_preadv = null_co_preadv,
+ .bdrv_co_pwritev = null_co_pwritev,
.bdrv_co_flush_to_disk = null_co_flush,
.bdrv_reopen_prepare = null_reopen_prepare,
.bdrv_co_block_status = null_co_block_status,
.bdrv_refresh_filename = null_refresh_filename,
+ .bdrv_refresh_limits = null_refresh_limits,
};
static BlockDriver bdrv_null_aio = {
@@ -286,14 +293,15 @@ static BlockDriver bdrv_null_aio = {
.bdrv_close = null_close,
.bdrv_getlength = null_getlength,
- .bdrv_aio_readv = null_aio_readv,
- .bdrv_aio_writev = null_aio_writev,
+ .bdrv_aio_preadv = null_aio_preadv,
+ .bdrv_aio_pwritev = null_aio_pwritev,
.bdrv_aio_flush = null_aio_flush,
.bdrv_reopen_prepare = null_reopen_prepare,
.bdrv_co_block_status = null_co_block_status,
.bdrv_refresh_filename = null_refresh_filename,
+ .bdrv_refresh_limits = null_refresh_limits,
};
static void bdrv_null_init(void)
--
2.14.3
- [Qemu-devel] [PATCH 0/6] block: byte-based AIO read/write, Eric Blake, 2018/02/15
- [Qemu-devel] [PATCH 3/6] null: Switch to byte-based read/write,
Eric Blake <=
- [Qemu-devel] [PATCH 4/6] rbd: Switch to byte-based callbacks, Eric Blake, 2018/02/15
- [Qemu-devel] [PATCH 6/6] block: Drop last of the sector-based aio callbacks, Eric Blake, 2018/02/15
- [Qemu-devel] [PATCH 5/6] vxhs: Switch to byte-based callbacks, Eric Blake, 2018/02/15
- [Qemu-devel] [PATCH 2/6] file-win32: Switch to byte-based callbacks, Eric Blake, 2018/02/15
- [Qemu-devel] [PATCH 1/6] block: Support byte-based aio callbacks, Eric Blake, 2018/02/15