[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH v6 15/28] migration: new cmd MIG_CMD_RECV_BITMAP
From: |
Peter Xu |
Subject: |
[Qemu-devel] [PATCH v6 15/28] migration: new cmd MIG_CMD_RECV_BITMAP |
Date: |
Thu, 8 Feb 2018 18:31:19 +0800 |
Add a new vm command MIG_CMD_RECV_BITMAP to request received bitmap for
one ramblock.
Reviewed-by: Dr. David Alan Gilbert <address@hidden>
Signed-off-by: Peter Xu <address@hidden>
---
migration/savevm.c | 61 ++++++++++++++++++++++++++++++++++++++++++++++++++
migration/savevm.h | 1 +
migration/trace-events | 2 ++
3 files changed, 64 insertions(+)
diff --git a/migration/savevm.c b/migration/savevm.c
index 4a75e66aab..7abd510b0a 100644
--- a/migration/savevm.c
+++ b/migration/savevm.c
@@ -78,6 +78,7 @@ enum qemu_vm_cmd {
were previously sent during
precopy but are dirty. */
MIG_CMD_PACKAGED, /* Send a wrapped stream within this stream */
+ MIG_CMD_RECV_BITMAP, /* Request for recved bitmap on dst */
MIG_CMD_MAX
};
@@ -95,6 +96,7 @@ static struct mig_cmd_args {
[MIG_CMD_POSTCOPY_RAM_DISCARD] = {
.len = -1, .name = "POSTCOPY_RAM_DISCARD" },
[MIG_CMD_PACKAGED] = { .len = 4, .name = "PACKAGED" },
+ [MIG_CMD_RECV_BITMAP] = { .len = -1, .name = "RECV_BITMAP" },
[MIG_CMD_MAX] = { .len = -1, .name = "MAX" },
};
@@ -953,6 +955,19 @@ void qemu_savevm_send_postcopy_run(QEMUFile *f)
qemu_savevm_command_send(f, MIG_CMD_POSTCOPY_RUN, 0, NULL);
}
+void qemu_savevm_send_recv_bitmap(QEMUFile *f, char *block_name)
+{
+ size_t len;
+ char buf[256];
+
+ trace_savevm_send_recv_bitmap(block_name);
+
+ buf[0] = len = strlen(block_name);
+ memcpy(buf + 1, block_name, len);
+
+ qemu_savevm_command_send(f, MIG_CMD_RECV_BITMAP, len + 1, (uint8_t *)buf);
+}
+
bool qemu_savevm_state_blocked(Error **errp)
{
SaveStateEntry *se;
@@ -1775,6 +1790,49 @@ static int
loadvm_handle_cmd_packaged(MigrationIncomingState *mis)
return ret;
}
+/*
+ * Handle request that source requests for recved_bitmap on
+ * destination. Payload format:
+ *
+ * len (1 byte) + ramblock_name (<255 bytes)
+ */
+static int loadvm_handle_recv_bitmap(MigrationIncomingState *mis,
+ uint16_t len)
+{
+ QEMUFile *file = mis->from_src_file;
+ RAMBlock *rb;
+ char block_name[256];
+ size_t cnt;
+
+ cnt = qemu_get_counted_string(file, block_name);
+ if (!cnt) {
+ error_report("%s: failed to read block name", __func__);
+ return -EINVAL;
+ }
+
+ /* Validate before using the data */
+ if (qemu_file_get_error(file)) {
+ return qemu_file_get_error(file);
+ }
+
+ if (len != cnt + 1) {
+ error_report("%s: invalid payload length (%d)", __func__, len);
+ return -EINVAL;
+ }
+
+ rb = qemu_ram_block_by_name(block_name);
+ if (!rb) {
+ error_report("%s: block '%s' not found", __func__, block_name);
+ return -EINVAL;
+ }
+
+ /* TODO: send the bitmap back to source */
+
+ trace_loadvm_handle_recv_bitmap(block_name);
+
+ return 0;
+}
+
/*
* Process an incoming 'QEMU_VM_COMMAND'
* 0 just a normal return
@@ -1848,6 +1906,9 @@ static int loadvm_process_command(QEMUFile *f)
case MIG_CMD_POSTCOPY_RAM_DISCARD:
return loadvm_postcopy_ram_handle_discard(mis, len);
+
+ case MIG_CMD_RECV_BITMAP:
+ return loadvm_handle_recv_bitmap(mis, len);
}
return 0;
diff --git a/migration/savevm.h b/migration/savevm.h
index 295c4a1f2c..8126b1cc14 100644
--- a/migration/savevm.h
+++ b/migration/savevm.h
@@ -46,6 +46,7 @@ int qemu_savevm_send_packaged(QEMUFile *f, const uint8_t
*buf, size_t len);
void qemu_savevm_send_postcopy_advise(QEMUFile *f);
void qemu_savevm_send_postcopy_listen(QEMUFile *f);
void qemu_savevm_send_postcopy_run(QEMUFile *f);
+void qemu_savevm_send_recv_bitmap(QEMUFile *f, char *block_name);
void qemu_savevm_send_postcopy_ram_discard(QEMUFile *f, const char *name,
uint16_t len,
diff --git a/migration/trace-events b/migration/trace-events
index 06a919a6e3..62b27fbf11 100644
--- a/migration/trace-events
+++ b/migration/trace-events
@@ -12,6 +12,7 @@ loadvm_state_cleanup(void) ""
loadvm_handle_cmd_packaged(unsigned int length) "%u"
loadvm_handle_cmd_packaged_main(int ret) "%d"
loadvm_handle_cmd_packaged_received(int ret) "%d"
+loadvm_handle_recv_bitmap(char *s) "%s"
loadvm_postcopy_handle_advise(void) ""
loadvm_postcopy_handle_listen(void) ""
loadvm_postcopy_handle_run(void) ""
@@ -34,6 +35,7 @@ savevm_send_open_return_path(void) ""
savevm_send_ping(uint32_t val) "0x%x"
savevm_send_postcopy_listen(void) ""
savevm_send_postcopy_run(void) ""
+savevm_send_recv_bitmap(char *name) "%s"
savevm_state_setup(void) ""
savevm_state_header(void) ""
savevm_state_iterate(void) ""
--
2.14.3
- [Qemu-devel] [PATCH v6 04/28] migration: new postcopy-pause state, (continued)
- [Qemu-devel] [PATCH v6 04/28] migration: new postcopy-pause state, Peter Xu, 2018/02/08
- [Qemu-devel] [PATCH v6 06/28] migration: allow dst vm pause on postcopy, Peter Xu, 2018/02/08
- [Qemu-devel] [PATCH v6 07/28] migration: allow src return path to pause, Peter Xu, 2018/02/08
- [Qemu-devel] [PATCH v6 08/28] migration: allow send_rq to fail, Peter Xu, 2018/02/08
- [Qemu-devel] [PATCH v6 09/28] migration: allow fault thread to pause, Peter Xu, 2018/02/08
- [Qemu-devel] [PATCH v6 10/28] qmp: hmp: add migrate "resume" option, Peter Xu, 2018/02/08
- [Qemu-devel] [PATCH v6 11/28] migration: pass MigrationState to migrate_init(), Peter Xu, 2018/02/08
- [Qemu-devel] [PATCH v6 12/28] migration: rebuild channel on source, Peter Xu, 2018/02/08
- [Qemu-devel] [PATCH v6 13/28] migration: new state "postcopy-recover", Peter Xu, 2018/02/08
- [Qemu-devel] [PATCH v6 14/28] migration: wakeup dst ram-load-thread for recover, Peter Xu, 2018/02/08
- [Qemu-devel] [PATCH v6 15/28] migration: new cmd MIG_CMD_RECV_BITMAP,
Peter Xu <=
- [Qemu-devel] [PATCH v6 16/28] migration: new message MIG_RP_MSG_RECV_BITMAP, Peter Xu, 2018/02/08
- [Qemu-devel] [PATCH v6 17/28] migration: new cmd MIG_CMD_POSTCOPY_RESUME, Peter Xu, 2018/02/08
- [Qemu-devel] [PATCH v6 18/28] migration: new message MIG_RP_MSG_RESUME_ACK, Peter Xu, 2018/02/08
- [Qemu-devel] [PATCH v6 19/28] migration: introduce SaveVMHandlers.resume_prepare, Peter Xu, 2018/02/08
- [Qemu-devel] [PATCH v6 20/28] migration: synchronize dirty bitmap for resume, Peter Xu, 2018/02/08
- [Qemu-devel] [PATCH v6 21/28] migration: setup ramstate for resume, Peter Xu, 2018/02/08