[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH v8 06/14] hw/moxie: Replace fprintf(stderr, "*\n" wi
From: |
Markus Armbruster |
Subject: |
[Qemu-devel] [PATCH v8 06/14] hw/moxie: Replace fprintf(stderr, "*\n" with error_report() |
Date: |
Sat, 3 Feb 2018 09:43:07 +0100 |
From: Alistair Francis <address@hidden>
Replace a large number of the fprintf(stderr, "*\n" calls with
error_report(). The functions were renamed with these commands and then
compiler issues where manually fixed.
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr,
"\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr,
"\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N;N;N; {s|fprintf(stderr,
"\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N;N; {s|fprintf(stderr,
"\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N; {s|fprintf(stderr,
"\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N; {s|fprintf(stderr,
"\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N; {s|fprintf(stderr,
"\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}'
\
{} +
find ./* -type f -exec sed -i \
'N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
Some lines where then manually tweaked to pass checkpatch.
Signed-off-by: Alistair Francis <address@hidden>
Cc: Anthony Green <address@hidden>
Reviewed-by: Philippe Mathieu-Daudé <address@hidden>
Reviewed-by: Thomas Huth <address@hidden>
Signed-off-by: Markus Armbruster <address@hidden>
Reviewed-by: Philippe Mathieu-Daudé <address@hidden>
---
hw/moxie/moxiesim.c | 13 ++++++-------
1 file changed, 6 insertions(+), 7 deletions(-)
diff --git a/hw/moxie/moxiesim.c b/hw/moxie/moxiesim.c
index 6c200becab..0bbf770795 100644
--- a/hw/moxie/moxiesim.c
+++ b/hw/moxie/moxiesim.c
@@ -63,8 +63,8 @@ static void load_kernel(MoxieCPU *cpu, LoaderParams
*loader_params)
0, 0);
if (kernel_size <= 0) {
- fprintf(stderr, "qemu: could not load kernel '%s'\n",
- loader_params->kernel_filename);
+ error_report("could not load kernel '%s'",
+ loader_params->kernel_filename);
exit(1);
}
@@ -77,9 +77,8 @@ static void load_kernel(MoxieCPU *cpu, LoaderParams
*loader_params)
initrd_offset = (kernel_high + ~TARGET_PAGE_MASK)
& TARGET_PAGE_MASK;
if (initrd_offset + initrd_size > loader_params->ram_size) {
- fprintf(stderr,
- "qemu: memory too small for initial ram disk '%s'\n",
- loader_params->initrd_filename);
+ error_report("memory too small for initial ram disk '%s'",
+ loader_params->initrd_filename);
exit(1);
}
initrd_size = load_image_targphys(loader_params->initrd_filename,
@@ -87,8 +86,8 @@ static void load_kernel(MoxieCPU *cpu, LoaderParams
*loader_params)
ram_size);
}
if (initrd_size == (target_ulong)-1) {
- fprintf(stderr, "qemu: could not load initial ram disk '%s'\n",
- loader_params->initrd_filename);
+ error_report("could not load initial ram disk '%s'",
+ loader_params->initrd_filename);
exit(1);
}
}
--
2.13.6
- [Qemu-devel] [PATCH v8 00/14] Remove some of the fprintf(stderr, "*, Markus Armbruster, 2018/02/03
- [Qemu-devel] [PATCH v8 07/14] hw/openrisc: Replace fprintf(stderr, "*\n" with error_report(), Markus Armbruster, 2018/02/03
- [Qemu-devel] [PATCH v8 03/14] hw/dma: Replace fprintf(stderr, "*\n" with error_report(), Markus Armbruster, 2018/02/03
- [Qemu-devel] [PATCH v8 10/14] hw/sd: Replace fprintf(stderr, "*\n" with DPRINTF(), Markus Armbruster, 2018/02/03
- [Qemu-devel] [PATCH v8 04/14] hw/lm32: Replace fprintf(stderr, "*\n" with error_report(), Markus Armbruster, 2018/02/03
- [Qemu-devel] [PATCH v8 06/14] hw/moxie: Replace fprintf(stderr, "*\n" with error_report(),
Markus Armbruster <=
- [Qemu-devel] [PATCH v8 13/14] tcg: Replace fprintf(stderr, "*\n" with error_report(), Markus Armbruster, 2018/02/03
- [Qemu-devel] [PATCH v8 05/14] hw/mips: Replace fprintf(stderr, "*\n" with error_report(), Markus Armbruster, 2018/02/03
- [Qemu-devel] [PATCH v8 12/14] hw/xen*: Replace fprintf(stderr, "*\n" with error_report(), Markus Armbruster, 2018/02/03
- [Qemu-devel] [PATCH v8 09/14] hw/ppc: Replace fprintf(stderr, "*\n" with error_report(), Markus Armbruster, 2018/02/03
- [Qemu-devel] [PATCH v8 08/14] hw/pci*: Replace fprintf(stderr, "*\n" with error_report(), Markus Armbruster, 2018/02/03
- [Qemu-devel] [PATCH v8 02/14] hw/arm: Replace fprintf(stderr, "*\n" with error_report(), Markus Armbruster, 2018/02/03
- [Qemu-devel] [PATCH v8 11/14] hw/sparc*: Replace fprintf(stderr, "*\n" with error_report(), Markus Armbruster, 2018/02/03
- [Qemu-devel] [PATCH v8 14/14] target: Use qemu_log() instead of fprintf(stderr, ...), Markus Armbruster, 2018/02/03