[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH 2/2] default-configs/ppc-softmmu: Restructure the sw
From: |
Thomas Huth |
Subject: |
[Qemu-devel] [PATCH 2/2] default-configs/ppc-softmmu: Restructure the switches according to the machines |
Date: |
Mon, 15 Jan 2018 10:30:55 +0100 |
Order the CONFIG switches in ppc-softmmu.mak according to the machine
classes where they are used (embedded, Mac or PReP), so that it is
easier for the users to disable a set of switches completely if they
are not needed.
For the embedded part, we now also include ppcemb-softmmu.mak instead
of duplicating all the CONFIG switches again, to make sure that the
ppc-softmmu build always contains all switches from ppcemb-softmmu (e.g.
the switch CONFIG_IDE_SII3112 from ppcemb was missing in ppc-softmmu).
While we're at it, also remove the CONFIG_IDE_CMD646 since this controller
does not seem to be used by any ppc machine in QEMU.
Signed-off-by: Thomas Huth <address@hidden>
---
default-configs/ppc-softmmu.mak | 59 +++++++++++++++++------------------------
1 file changed, 24 insertions(+), 35 deletions(-)
diff --git a/default-configs/ppc-softmmu.mak b/default-configs/ppc-softmmu.mak
index bb225c6..460e6f4 100644
--- a/default-configs/ppc-softmmu.mak
+++ b/default-configs/ppc-softmmu.mak
@@ -1,26 +1,18 @@
# Default configuration for ppc-softmmu
-include pci.mak
-include sound.mak
-include usb.mak
-CONFIG_PPC4XX=y
+# For embedded PPCs:
+include ppcemb-softmmu.mak
+CONFIG_E500=y
+CONFIG_ETSEC=y
+CONFIG_PLATFORM_BUS=y
+CONFIG_PPCE500_PCI=y
+CONFIG_OPENPIC_KVM=$(call land,$(CONFIG_E500),$(CONFIG_KVM))
+
+# For Macs
+CONFIG_MAC=y
CONFIG_ESCC=y
-CONFIG_M48T59=y
-CONFIG_SERIAL=y
-CONFIG_PARALLEL=y
-CONFIG_I8254=y
-CONFIG_PCKBD=y
-CONFIG_FDC=y
-CONFIG_I8257=y
-CONFIG_I82374=y
-CONFIG_OPENPIC=y
-CONFIG_PREP_PCI=y
-CONFIG_I82378=y
-CONFIG_PC87312=y
CONFIG_MACIO=y
CONFIG_SUNGEM=y
-CONFIG_PCSPK=y
-CONFIG_CS4231A=y
CONFIG_CUDA=y
CONFIG_ADB=y
CONFIG_MAC_NVRAM=y
@@ -29,26 +21,23 @@ CONFIG_HEATHROW_PIC=y
CONFIG_GRACKLE_PCI=y
CONFIG_UNIN_PCI=y
CONFIG_DEC_PCI=y
-CONFIG_PPCE500_PCI=y
-CONFIG_IDE_ISA=y
-CONFIG_IDE_CMD646=y
CONFIG_IDE_MACIO=y
-CONFIG_NE2000_ISA=y
-CONFIG_PFLASH_CFI01=y
-CONFIG_PFLASH_CFI02=y
-CONFIG_PTIMER=y
-CONFIG_I8259=y
-CONFIG_XILINX=y
-CONFIG_XILINX_ETHLITE=y
-CONFIG_PREP=y
-CONFIG_MAC=y
-CONFIG_E500=y
-CONFIG_OPENPIC_KVM=$(call land,$(CONFIG_E500),$(CONFIG_KVM))
-CONFIG_PLATFORM_BUS=y
-CONFIG_ETSEC=y
-CONFIG_SM501=y
+
# For PReP
+CONFIG_PREP=y
+CONFIG_PREP_PCI=y
CONFIG_SERIAL_ISA=y
CONFIG_MC146818RTC=y
CONFIG_ISA_TESTDEV=y
CONFIG_RS6000_MC=y
+CONFIG_PARALLEL=y
+CONFIG_I82374=y
+CONFIG_I82378=y
+CONFIG_I8254=y
+CONFIG_FDC=y
+CONFIG_PCKBD=y
+CONFIG_NE2000_ISA=y
+CONFIG_PCSPK=y
+CONFIG_PC87312=y
+CONFIG_IDE_ISA=y
+CONFIG_CS4231A=y
--
1.8.3.1