[Qemu-devel] [PATCH v6 18/21] sdhci: implement the Host Control 2 register for the tunning sequence

[Philippe Mathieu-Daudé]

[based on a patch from Alistair Francis <address@hidden>
 from qemu/xilinx tag xilinx-v2015.2]
Signed-off-by: Philippe Mathieu-Daudé <address@hidden>
---
 include/hw/sd/sdhci.h |  1 +
 hw/sd/sdhci.c         | 22 +++++++++++++++++++---
 2 files changed, 20 insertions(+), 3 deletions(-)

diff --git a/include/hw/sd/sdhci.h b/include/hw/sd/sdhci.h
index 890dd1bbac..e66d6d6abd 100644
--- a/include/hw/sd/sdhci.h
+++ b/include/hw/sd/sdhci.h
@@ -71,6 +71,7 @@ typedef struct SDHCIState {
     uint16_t norintsigen;  /* Normal Interrupt Signal Enable Register */
     uint16_t errintsigen;  /* Error Interrupt Signal Enable Register */
     uint16_t acmd12errsts; /* Auto CMD12 error status register */
+    uint16_t hostctl2;     /* Host Control 2 */
     uint64_t admasysaddr;  /* ADMA System Address Register */
 
     /* Read-only registers */
diff --git a/hw/sd/sdhci.c b/hw/sd/sdhci.c
index 8e4805c84e..834b835f3e 100644
--- a/hw/sd/sdhci.c
+++ b/hw/sd/sdhci.c
@@ -312,14 +312,29 @@ static void sdhci_end_transfer(SDHCIState *s)
 static void sdhci_read_block_from_card(SDHCIState *s)
 {
     int index = 0;
+    uint8_t data;
+    const uint16_t blk_size = s->blksize & BLOCK_SIZE_MASK;
 
     if ((s->trnmod & SDHC_TRNS_MULTI) &&
             (s->trnmod & SDHC_TRNS_BLK_CNT_EN) && (s->blkcnt == 0)) {
         return;
     }
 
-    for (index = 0; index < (s->blksize & BLOCK_SIZE_MASK); index++) {
-        s->fifo_buffer[index] = sdbus_read_data(&s->sdbus);
+    for (index = 0; index < blk_size; index++) {
+        data = sdbus_read_data(&s->sdbus);
+        if (!FIELD_EX32(s->hostctl2, SDHC_HOSTCTL2, EXECUTE_TUNING)) {
+            /* Device is not in tunning */
+            s->fifo_buffer[index] = data;
+        }
+    }
+
+    if (FIELD_EX32(s->hostctl2, SDHC_HOSTCTL2, EXECUTE_TUNING)) {
+        /* Device is in tunning */
+        s->hostctl2 &= ~R_SDHC_HOSTCTL2_EXECUTE_TUNING_MASK;
+        s->hostctl2 |= R_SDHC_HOSTCTL2_SAMPLING_CLKSEL_MASK;
+        s->prnsts &= ~(SDHC_DAT_LINE_ACTIVE | SDHC_DOING_READ |
+                       SDHC_DATA_INHIBIT);
+        goto read_done;
     }
 
     /* New data now available for READ through Buffer Port Register */
@@ -344,6 +359,7 @@ static void sdhci_read_block_from_card(SDHCIState *s)
         }
     }
 
+read_done:
     sdhci_update_irq(s);
 }
 
@@ -909,7 +925,7 @@ static uint64_t sdhci_read(void *opaque, hwaddr offset, 
unsigned size)
         ret = s->norintsigen | (s->errintsigen << 16);
         break;
     case SDHC_ACMD12ERRSTS:
-        ret = s->acmd12errsts;
+        ret = s->acmd12errsts | (s->hostctl2 << 16);
         break;
     case SDHC_CAPAB:
         ret = (uint32_t)s->capareg;
-- 
2.15.1