[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v8 4/4] contrib/vhost-user-blk: introduce a vhos
From: |
Liu, Changpeng |
Subject: |
Re: [Qemu-devel] [PATCH v8 4/4] contrib/vhost-user-blk: introduce a vhost-user-blk sample application |
Date: |
Wed, 3 Jan 2018 02:06:45 +0000 |
> -----Original Message-----
> From: Marc-André Lureau [mailto:address@hidden
> Sent: Tuesday, January 2, 2018 11:44 PM
> To: Liu, Changpeng <address@hidden>
> Cc: QEMU <address@hidden>; Harris, James R <address@hidden>;
> Michael S. Tsirkin <address@hidden>; Stefan Hajnoczi <address@hidden>;
> Paolo Bonzini <address@hidden>; Felipe Franciosi <address@hidden>
> Subject: Re: [Qemu-devel] [PATCH v8 4/4] contrib/vhost-user-blk: introduce a
> vhost-user-blk sample application
>
> On Tue, Jan 2, 2018 at 4:55 AM, Changpeng Liu <address@hidden> wrote:
> > This commit introcudes a vhost-user-blk backend device, it uses UNIX'
>
> introcudes -> introduces
Thanks.
>
> > domain socket to communicate with QEMU. The vhost-user-blk sample
> > application should be used with QEMU vhost-user-blk-pci device.
> >
> > To use it, complie with:
> > make vhost-user-blk
> >
> > and start like this:
> > vhost-user-blk -b /dev/sdb -s /path/vhost.socket
> >
> > Signed-off-by: Changpeng Liu <address@hidden>
> > ---
> > .gitignore | 1 +
> > Makefile | 3 +
> > Makefile.objs | 1 +
> > contrib/vhost-user-blk/Makefile.objs | 1 +
> > contrib/vhost-user-blk/vhost-user-blk.c | 543
> ++++++++++++++++++++++++++++++++
> > 5 files changed, 549 insertions(+)
> > create mode 100644 contrib/vhost-user-blk/Makefile.objs
> > create mode 100644 contrib/vhost-user-blk/vhost-user-blk.c
> >
> > diff --git a/.gitignore b/.gitignore
> > index 433f64f..704b222 100644
> > --- a/.gitignore
> > +++ b/.gitignore
> > @@ -54,6 +54,7 @@
> > /module_block.h
> > /scsi/qemu-pr-helper
> > /vhost-user-scsi
> > +/vhost-user-blk
> > /fsdev/virtfs-proxy-helper
> > *.tmp
> > *.[1-9]
> > diff --git a/Makefile b/Makefile
> > index d86ecd2..f021fc8 100644
> > --- a/Makefile
> > +++ b/Makefile
> > @@ -331,6 +331,7 @@ dummy := $(call unnest-vars,, \
> > ivshmem-server-obj-y \
> > libvhost-user-obj-y \
> > vhost-user-scsi-obj-y \
> > + vhost-user-blk-obj-y \
> > qga-vss-dll-obj-y \
> > block-obj-y \
> > block-obj-m \
> > @@ -562,6 +563,8 @@ ivshmem-server$(EXESUF): $(ivshmem-server-obj-y)
> $(COMMON_LDADDS)
> > endif
> > vhost-user-scsi$(EXESUF): $(vhost-user-scsi-obj-y) libvhost-user.a
> > $(call LINK, $^)
> > +vhost-user-blk$(EXESUF): $(vhost-user-blk-obj-y) libvhost-user.a
> > + $(call LINK, $^)
> >
> > module_block.h: $(SRC_PATH)/scripts/modules/module_block.py config-
> host.mak
> > $(call quiet-command,$(PYTHON) $< $@ \
> > diff --git a/Makefile.objs b/Makefile.objs
> > index 285c6f3..ae9aef7 100644
> > --- a/Makefile.objs
> > +++ b/Makefile.objs
> > @@ -115,6 +115,7 @@ libvhost-user-obj-y = contrib/libvhost-user/
> > vhost-user-scsi.o-cflags := $(LIBISCSI_CFLAGS)
> > vhost-user-scsi.o-libs := $(LIBISCSI_LIBS)
> > vhost-user-scsi-obj-y = contrib/vhost-user-scsi/
> > +vhost-user-blk-obj-y = contrib/vhost-user-blk/
> >
> >
> ####################################################################
> ##
> > trace-events-subdirs =
> > diff --git a/contrib/vhost-user-blk/Makefile.objs b/contrib/vhost-user-
> blk/Makefile.objs
> > new file mode 100644
> > index 0000000..72e2cdc
> > --- /dev/null
> > +++ b/contrib/vhost-user-blk/Makefile.objs
> > @@ -0,0 +1 @@
> > +vhost-user-blk-obj-y = vhost-user-blk.o
> > diff --git a/contrib/vhost-user-blk/vhost-user-blk.c b/contrib/vhost-user-
> blk/vhost-user-blk.c
> > new file mode 100644
> > index 0000000..4649435
> > --- /dev/null
> > +++ b/contrib/vhost-user-blk/vhost-user-blk.c
> > @@ -0,0 +1,543 @@
> > +/*
> > + * vhost-user-blk sample application
> > + *
> > + * Copyright (c) 2017 Intel Corporation. All rights reserved.
> > + *
> > + * Author:
> > + * Changpeng Liu <address@hidden>
> > + *
> > + * This work is based on the "vhost-user-scsi" sample and "virtio-blk"
> > driver
> > + * implemention by:
>
> implemention -> implementation
Thanks.
>
> > + * Felipe Franciosi <address@hidden>
> > + * Anthony Liguori <address@hidden>
> > + *
> > + * This work is licensed under the terms of the GNU GPL, version 2 only.
> > + * See the COPYING file in the top-level directory.
> > + */
> > +
> > +#include "qemu/osdep.h"
> > +#include "standard-headers/linux/virtio_blk.h"
> > +#include "contrib/libvhost-user/libvhost-user-glib.h"
> > +#include "contrib/libvhost-user/libvhost-user.h"
> > +
> > +#include <glib.h>
> > +
> > +struct virtio_blk_inhdr {
> > + unsigned char status;
> > +};
> > +
> > +/* vhost user block device */
> > +typedef struct VubDev {
> > + VugDev parent;
> > + int blk_fd;
> > + struct virtio_blk_config blkcfg;
> > + char *blk_name;
> > + GMainLoop *loop;
> > +} VubDev;
> > +
> > +typedef struct VubReq {
> > + VuVirtqElement *elem;
> > + int64_t sector_num;
> > + size_t size;
> > + struct virtio_blk_inhdr *in;
> > + struct virtio_blk_outhdr *out;
> > + VubDev *vdev_blk;
> > + struct VuVirtq *vq;
> > +} VubReq;
> > +
> > +/** refer util/iov.c **/
>
> let's use regular /* comment */ (I know vhost-user-scsi uses both
> style for some reason)
Ok.
>
> > +static size_t vub_iov_size(const struct iovec *iov,
> > + const unsigned int iov_cnt)
> > +{
> > + size_t len;
> > + unsigned int i;
> > +
> > + len = 0;
> > + for (i = 0; i < iov_cnt; i++) {
> > + len += iov[i].iov_len;
> > + }
> > + return len;
> > +}
> > +
> > +static void vub_panic_cb(VuDev *vu_dev, const char *buf)
> > +{
> > + VugDev *gdev;
> > + VubDev *vdev_blk;
> > +
> > + assert(vu_dev);
> > +
> > + gdev = container_of(vu_dev, VugDev, parent);
> > + vdev_blk = container_of(gdev, VubDev, parent);
> > + if (buf) {
> > + g_warning("vu_panic: %s", buf);
> > + }
> > +
> > + g_main_loop_quit(vdev_blk->loop);
> > +}
> > +
> > +static void vub_req_complete(VubReq *req)
> > +{
> > + VugDev *gdev = &req->vdev_blk->parent;
> > + VuDev *vu_dev = &gdev->parent;
> > +
> > + /* IO size with 1 extra status byte */
> > + vu_queue_push(vu_dev, req->vq, req->elem,
> > + req->size + 1);
> > + vu_queue_notify(vu_dev, req->vq);
> > +
> > + if (req->elem) {
> > + free(req->elem);
> > + }
> > + g_free(req);
> > +}
> > +
> > +static int vub_open(const char *file_name, bool wce)
> > +{
> > + int fd;
> > + int flags = O_RDWR;
> > +
> > + if (!wce) {
> > + flags |= O_DIRECT;
> > + }
> > +
> > + fd = open(file_name, flags);
> > + if (fd < 0) {
> > + fprintf(stderr, "Cannot open file %s, %s\n", file_name,
> > + strerror(errno));
> > + return -1;
> > + }
> > +
> > + return fd;
> > +}
> > +
> > +static ssize_t
> > +vub_readv(VubReq *req, struct iovec *iov, uint32_t iovcnt)
> > +{
> > + VubDev *vdev_blk = req->vdev_blk;
> > + ssize_t rc;
> > +
> > + if (!iovcnt) {
> > + fprintf(stderr, "Invalid Read IOV count\n");
> > + return -1;
> > + }
> > +
> > + req->size = vub_iov_size(iov, iovcnt);
> > + rc = preadv(vdev_blk->blk_fd, iov, iovcnt, req->sector_num * 512);
> > + if (rc < 0) {
> > + fprintf(stderr, "%s, Sector %"PRIu64", Size %lu failed with %s\n",
> > + vdev_blk->blk_name, req->sector_num, req->size,
> > + strerror(errno));
> > + return -1;
> > + }
> > +
> > + return rc;
> > +}
> > +
> > +static ssize_t
> > +vub_writev(VubReq *req, struct iovec *iov, uint32_t iovcnt)
> > +{
> > + VubDev *vdev_blk = req->vdev_blk;
> > + ssize_t rc;
> > +
> > + if (!iovcnt) {
> > + fprintf(stderr, "Invalid Write IOV count\n");
> > + return -1;
> > + }
> > +
> > + req->size = vub_iov_size(iov, iovcnt);
> > + rc = pwritev(vdev_blk->blk_fd, iov, iovcnt, req->sector_num * 512);
> > + if (rc < 0) {
> > + fprintf(stderr, "%s, Sector %"PRIu64", Size %lu failed with %s\n",
> > + vdev_blk->blk_name, req->sector_num, req->size,
> > + strerror(errno));
> > + return -1;
> > + }
> > +
> > + return rc;
> > +}
> > +
> > +static void
> > +vub_flush(VubReq *req)
> > +{
> > + VubDev *vdev_blk = req->vdev_blk;
> > +
> > + fdatasync(vdev_blk->blk_fd);
> > +}
> > +
> > +static int vub_virtio_process_req(VubDev *vdev_blk,
> > + VuVirtq *vq)
> > +{
> > + VugDev *gdev = &vdev_blk->parent;
> > + VuDev *vu_dev = &gdev->parent;
> > + VuVirtqElement *elem;
> > + uint32_t type;
> > + unsigned in_num;
> > + unsigned out_num;
> > + VubReq *req;
> > +
> > + elem = vu_queue_pop(vu_dev, vq, sizeof(VuVirtqElement));
>
> (there should be an optimization possible here, where you allocate
> with a size > VuVirtqElement: this should avoid the need for second
> allocation of VubReq)
Ok, will remove the following allocation for VubReq.
>
> > + if (!elem) {
> > + return -1;
> > + }
> > +
> > + /* refer to hw/block/virtio_blk.c */
> > + if (elem->out_num < 1 || elem->in_num < 1) {
> > + fprintf(stderr, "virtio-blk request missing headers\n");
> > + free(elem);
> > + return -1;
> > + }
> > +
> > + req = g_new0(VubReq, 1);
> > + req->vdev_blk = vdev_blk;
> > + req->vq = vq;
> > + req->elem = elem;
> > +
> > + in_num = elem->in_num;
> > + out_num = elem->out_num;
> > +
> > + /* don't support VIRTIO_F_ANY_LAYOUT and virtio 1.0 only */
> > + if (elem->out_sg[0].iov_len < sizeof(struct virtio_blk_outhdr)) {
> > + fprintf(stderr, "Invalid outhdr size\n");
> > + goto err;
> > + }
> > + req->out = (struct virtio_blk_outhdr *)elem->out_sg[0].iov_base;
> > + out_num--;
> > +
> > + if (elem->in_sg[in_num - 1].iov_len < sizeof(struct virtio_blk_inhdr))
> > {
> > + fprintf(stderr, "Invalid inhdr size\n");
> > + goto err;
> > + }
> > + req->in = (struct virtio_blk_inhdr *)elem->in_sg[in_num - 1].iov_base;
> > + in_num--;
> > +
> > + type = le32toh(req->out->type);
> > + switch (type & ~(VIRTIO_BLK_T_OUT | VIRTIO_BLK_T_BARRIER)) {
> > + case VIRTIO_BLK_T_IN: {
> > + ssize_t ret = 0;
> > + bool is_write = type & VIRTIO_BLK_T_OUT;
> > + req->sector_num = le64toh(req->out->sector);
> > + if (is_write) {
> > + ret = vub_writev(req, &elem->out_sg[1], out_num);
> > + } else {
> > + ret = vub_readv(req, &elem->in_sg[0], in_num);
> > + }
> > + if (ret >= 0) {
> > + req->in->status = VIRTIO_BLK_S_OK;
> > + } else {
> > + req->in->status = VIRTIO_BLK_S_IOERR;
> > + }
> > + vub_req_complete(req);
> > + break;
> > + }
> > + case VIRTIO_BLK_T_FLUSH: {
> > + vub_flush(req);
> > + req->in->status = VIRTIO_BLK_S_OK;
> > + vub_req_complete(req);
> > + break;
> > + }
> > + case VIRTIO_BLK_T_GET_ID: {
> > + size_t size = MIN(vub_iov_size(&elem->in_sg[0], in_num),
> > + VIRTIO_BLK_ID_BYTES);
> > + snprintf(elem->in_sg[0].iov_base, size, "%s",
> > "vhost_user_blk");
> > + req->in->status = VIRTIO_BLK_S_OK;
> > + req->size = elem->in_sg[0].iov_len;
> > + vub_req_complete(req);
> > + break;
> > + }
> > + default: {
> > + req->in->status = VIRTIO_BLK_S_UNSUPP;
> > + vub_req_complete(req);
> > + break;
> > + }
> > + }
> > +
> > + return 0;
> > +
> > +err:
> > + free(elem);
> > + g_free(req);
> > + return -1;
> > +}
> > +
> > +static void vub_process_vq(VuDev *vu_dev, int idx)
> > +{
> > + VugDev *gdev;
> > + VubDev *vdev_blk;
> > + VuVirtq *vq;
> > + int ret;
> > +
> > + if ((idx < 0) || (idx >= VHOST_MAX_NR_VIRTQUEUE)) {
> > + fprintf(stderr, "VQ Index out of range: %d\n", idx);
> > + vub_panic_cb(vu_dev, NULL);
> > + return;
> > + }
> > +
> > + gdev = container_of(vu_dev, VugDev, parent);
> > + vdev_blk = container_of(gdev, VubDev, parent);
> > + assert(vdev_blk);
> > +
> > + vq = vu_get_queue(vu_dev, idx);
> > + assert(vq);
> > +
> > + while (1) {
> > + ret = vub_virtio_process_req(vdev_blk, vq);
> > + if (ret) {
> > + break;
> > + }
> > + }
> > +}
> > +
> > +static void vub_queue_set_started(VuDev *vu_dev, int idx, bool started)
> > +{
> > + VuVirtq *vq;
> > +
> > + assert(vu_dev);
> > +
> > + vq = vu_get_queue(vu_dev, idx);
> > + vu_set_queue_handler(vu_dev, vq, started ? vub_process_vq : NULL);
> > +}
> > +
> > +static uint64_t
> > +vub_get_features(VuDev *dev)
> > +{
> > + return 1ull << VIRTIO_BLK_F_SIZE_MAX |
> > + 1ull << VIRTIO_BLK_F_SEG_MAX |
> > + 1ull << VIRTIO_BLK_F_TOPOLOGY |
> > + 1ull << VIRTIO_BLK_F_BLK_SIZE |
> > + 1ull << VIRTIO_BLK_F_FLUSH |
> > + 1ull << VIRTIO_BLK_F_CONFIG_WCE |
> > + 1ull << VIRTIO_F_VERSION_1 |
> > + 1ull << VHOST_USER_F_PROTOCOL_FEATURES;
> > +}
> > +
> > +static int
> > +vub_get_config(VuDev *vu_dev, uint8_t *config, uint32_t len)
> > +{
> > + VugDev *gdev;
> > + VubDev *vdev_blk;
> > +
> > + gdev = container_of(vu_dev, VugDev, parent);
> > + vdev_blk = container_of(gdev, VubDev, parent);
> > + memcpy(config, &vdev_blk->blkcfg, len);
> > +
> > + return 0;
> > +}
> > +
> > +static int
> > +vub_set_config(VuDev *vu_dev, const uint8_t *data,
> > + uint32_t offset, uint32_t size, uint32_t flags)
> > +{
> > + VugDev *gdev;
> > + VubDev *vdev_blk;
> > + uint8_t wce;
> > + int fd;
> > +
> > + /* don't support live migration */
> > + if (flags != VHOST_SET_CONFIG_TYPE_MASTER) {
> > + return -1;
> > + }
> > +
> > + gdev = container_of(vu_dev, VugDev, parent);
> > + vdev_blk = container_of(gdev, VubDev, parent);
> > +
> > + if (offset != offsetof(struct virtio_blk_config, wce) ||
> > + size != 1) {
> > + return -1;
> > + }
> > +
> > + wce = *data;
> > + if (wce == vdev_blk->blkcfg.wce) {
> > + /* Do nothing as same with old configuration */
> > + return 0;
> > + }
> > +
> > + vdev_blk->blkcfg.wce = wce;
> > + fprintf(stdout, "Write Cache Policy Changed\n");
> > + if (vdev_blk->blk_fd >= 0) {
> > + close(vdev_blk->blk_fd);
> > + vdev_blk->blk_fd = -1;
> > + }
> > +
> > + fd = vub_open(vdev_blk->blk_name, wce);
> > + if (fd < 0) {
> > + fprintf(stderr, "Error to open block device %s\n",
> > vdev_blk->blk_name);
> > + vdev_blk->blk_fd = -1;
> > + return -1;
> > + }
> > + vdev_blk->blk_fd = fd;
> > +
> > + return 0;
> > +}
> > +
> > +static const VuDevIface vub_iface = {
> > + .get_features = vub_get_features,
> > + .queue_set_started = vub_queue_set_started,
> > + .get_config = vub_get_config,
> > + .set_config = vub_set_config,
> > +};
> > +
> > +static int unix_sock_new(char *unix_fn)
> > +{
> > + int sock;
> > + struct sockaddr_un un;
> > + size_t len;
> > +
> > + assert(unix_fn);
> > +
> > + sock = socket(AF_UNIX, SOCK_STREAM, 0);
> > + if (sock <= 0) {
> > + perror("socket");
> > + return -1;
> > + }
> > +
> > + un.sun_family = AF_UNIX;
> > + (void)snprintf(un.sun_path, sizeof(un.sun_path), "%s", unix_fn);
> > + len = sizeof(un.sun_family) + strlen(un.sun_path);
> > +
> > + (void)unlink(unix_fn);
> > + if (bind(sock, (struct sockaddr *)&un, len) < 0) {
> > + perror("bind");
> > + goto fail;
> > + }
> > +
> > + if (listen(sock, 1) < 0) {
> > + perror("listen");
> > + goto fail;
> > + }
> > +
> > + return sock;
> > +
> > +fail:
> > + (void)close(sock);
> > +
> > + return -1;
> > +}
> > +
> > +static void vub_free(struct VubDev *vdev_blk)
> > +{
> > + if (!vdev_blk) {
> > + return;
> > + }
> > +
> > + g_main_loop_unref(vdev_blk->loop);
> > + if (vdev_blk->blk_fd >= 0) {
> > + close(vdev_blk->blk_fd);
> > + }
> > + g_free(vdev_blk);
> > +}
> > +
> > +static uint32_t
> > +vub_get_blocksize(int fd)
> > +{
> > + uint32_t blocksize = 512;
> > +
> > + #if defined(__linux__) && defined(BLKSSZGET)
>
> Weird indentation, please keep preprocessor lines at first column.
Ok.
>
> > + if (ioctl(fd, BLKSSZGET, &blocksize) == 0) {
> > + return blocklen;
> > + }
> > + #endif
> > +
> > + return blocksize;
> > +}
> > +
> > +static void
> > +vub_initialize_config(int fd, struct virtio_blk_config *config)
> > +{
> > + off64_t capacity;
> > +
> > + capacity = lseek64(fd, 0, SEEK_END);
> > + config->capacity = capacity >> 9;
> > + config->blk_size = vub_get_blocksize(fd);
> > + config->size_max = 65536;
> > + config->seg_max = 128 - 2;
> > + config->min_io_size = 1;
> > + config->opt_io_size = 1;
> > + config->num_queues = 1;
> > +}
> > +
> > +static VubDev *
> > +vub_new(char *blk_file)
> > +{
> > + VubDev *vdev_blk;
> > +
> > + vdev_blk = g_new0(VubDev, 1);
> > + vdev_blk->loop = g_main_loop_new(NULL, FALSE);
> > + vdev_blk->blk_fd = vub_open(blk_file, 0);
> > + if (vdev_blk->blk_fd < 0) {
> > + fprintf(stderr, "Error to open block device %s\n", blk_file);
> > + return NULL;
>
> You leak vdev_blk here.
Will fix here.
>
> > + }
> > + vdev_blk->blkcfg.wce = 0;
> > + vdev_blk->blk_name = blk_file;
> > +
> > + /* fill virtio_blk_config with block parameters */
> > + vub_initialize_config(vdev_blk->blk_fd, &vdev_blk->blkcfg);
> > +
> > + return vdev_blk;
> > +}
> > +
> > +int main(int argc, char **argv)
> > +{
> > + int opt;
> > + char *unix_socket = NULL;
> > + char *blk_file = NULL;
> > + int lsock = -1, csock = -1;
> > + VubDev *vdev_blk = NULL;
> > +
> > + while ((opt = getopt(argc, argv, "b:s:h")) != -1) {
> > + switch (opt) {
> > + case 'b':
> > + blk_file = g_strdup(optarg);
> > + break;
> > + case 's':
> > + unix_socket = g_strdup(optarg);
> > + break;
> > + case 'h':
> > + default:
> > + printf("Usage: %s [-b block device or file, -s UNIX domain
> > socket]"
> > + " | [ -h ]\n", argv[0]);
> > + return 0;
> > + }
> > + }
> > +
> > + if (!unix_socket || !blk_file) {
> > + printf("Usage: %s [-b block device or file, -s UNIX domain socket]
> > |"
> > + " [ -h ]\n", argv[0]);
> > + return -1;
> > + }
> > +
> > + lsock = unix_sock_new(unix_socket);
> > + if (lsock < 0) {
> > + goto err;
> > + }
> > +
> > + csock = accept(lsock, (void *)0, (void *)0);
> > + if (csock < 0) {
> > + fprintf(stderr, "Accept error %s\n", strerror(errno));
> > + goto err;
> > + }
> > +
> > + vdev_blk = vub_new(blk_file);
> > + if (!vdev_blk) {
> > + goto err;
> > + }
> > +
> > + vug_init(&vdev_blk->parent, csock, vub_panic_cb, &vub_iface);
> > +
> > + g_main_loop_run(vdev_blk->loop);
> > +
> > + vug_deinit(&vdev_blk->parent);
> > +
> > +err:
> > + vub_free(vdev_blk);
> > + if (csock >= 0) {
> > + close(csock);
> > + }
> > + if (lsock >= 0) {
> > + close(lsock);
> > + }
> > + g_free(unix_socket);
> > + g_free(blk_file);
> > +
> > + return 0;
> > +}
> > --
> > 1.9.3
> >
> >
>
> thanks
>
> --
> Marc-André Lureau
- [Qemu-devel] [PATCH v8 1/4] vhost-user: add new vhost user messages to support virtio config space, (continued)