[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH 1/3] net: Drop unusual use of do { } while (0);
From: |
Eric Blake |
Subject: |
[Qemu-devel] [PATCH 1/3] net: Drop unusual use of do { } while (0); |
Date: |
Thu, 30 Nov 2017 07:41:57 -0600 |
For a couple of macros in pcnet.c, we have to provide a new scope
to avoid compiler warnings about declarations in the middle of a
switch statement that aren't in a sub-scope. But use of
'do { ... } while (0);' merely to provide that new scope is arcane
overkill, compared to just using '{ ... }'.
Signed-off-by: Eric Blake <address@hidden>
---
hw/net/pcnet.c | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)
diff --git a/hw/net/pcnet.c b/hw/net/pcnet.c
index 654455355f..641bf2fd88 100644
--- a/hw/net/pcnet.c
+++ b/hw/net/pcnet.c
@@ -455,32 +455,32 @@ static inline void pcnet_rmd_store(PCNetState *s, struct
pcnet_RMD *rmd,
#define CHECK_RMD(ADDR,RES) do { \
switch (BCR_SWSTYLE(s)) { \
case 0x00: \
- do { \
+ { \
uint16_t rda[4]; \
s->phys_mem_read(s->dma_opaque, (ADDR), \
(void *)&rda[0], sizeof(rda), 0); \
(RES) |= (rda[2] & 0xf000)!=0xf000; \
(RES) |= (rda[3] & 0xf000)!=0x0000; \
- } while (0); \
+ } \
break; \
case 0x01: \
case 0x02: \
- do { \
+ { \
uint32_t rda[4]; \
s->phys_mem_read(s->dma_opaque, (ADDR), \
(void *)&rda[0], sizeof(rda), 0); \
(RES) |= (rda[1] & 0x0000f000L)!=0x0000f000L; \
(RES) |= (rda[2] & 0x0000f000L)!=0x00000000L; \
- } while (0); \
+ } \
break; \
case 0x03: \
- do { \
+ { \
uint32_t rda[4]; \
s->phys_mem_read(s->dma_opaque, (ADDR), \
(void *)&rda[0], sizeof(rda), 0); \
(RES) |= (rda[0] & 0x0000f000L)!=0x00000000L; \
(RES) |= (rda[1] & 0x0000f000L)!=0x0000f000L; \
- } while (0); \
+ } \
break; \
} \
} while (0)
@@ -488,22 +488,22 @@ static inline void pcnet_rmd_store(PCNetState *s, struct
pcnet_RMD *rmd,
#define CHECK_TMD(ADDR,RES) do { \
switch (BCR_SWSTYLE(s)) { \
case 0x00: \
- do { \
+ { \
uint16_t xda[4]; \
s->phys_mem_read(s->dma_opaque, (ADDR), \
(void *)&xda[0], sizeof(xda), 0); \
(RES) |= (xda[2] & 0xf000)!=0xf000; \
- } while (0); \
+ } \
break; \
case 0x01: \
case 0x02: \
case 0x03: \
- do { \
+ { \
uint32_t xda[4]; \
s->phys_mem_read(s->dma_opaque, (ADDR), \
(void *)&xda[0], sizeof(xda), 0); \
(RES) |= (xda[1] & 0x0000f000L)!=0x0000f000L; \
- } while (0); \
+ } \
break; \
} \
} while (0)
--
2.14.3