Re: [Qemu-devel] [PATCH 0/3] vfio/pci: Add NVIDIA GPUDirect P2P clique support

[Bob Chen]

It's a mistake, please ignore. This patch is able to work.

2017-10-26 18:45 GMT+08:00 Bob Chen <address@hidden>:

> There seem to be some bugs in these patches, causing my VM failed to boot.
>
> Test case:
>
> 0. Merge these 3 patches in to release 2.10.1
>
> 1. qemu-system-x86_64_2.10.1  ... \
> -device vfio-pci,host=04:00.0 \
> -device vfio-pci,host=05:00.0 \
> -device vfio-pci,host=08:00.0 \
> -device vfio-pci,host=09:00.0 \
> -device vfio-pci,host=85:00.0 \
> -device vfio-pci,host=86:00.0 \
> -device vfio-pci,host=89:00.0 \
> -device vfio-pci,host=8a:00.0 ...
>
> The guest was able to boot up.
>
> 2. qemu-system-x86_64_2.10.1  ... \
> -device vfio-pci,host=04:00.0,x-nv-gpudirect-clique=0 \
> -device vfio-pci,host=05:00.0,x-nv-gpudirect-clique=0 \
> -device vfio-pci,host=08:00.0,x-nv-gpudirect-clique=0 \
> -device vfio-pci,host=09:00.0,x-nv-gpudirect-clique=0 \
> -device vfio-pci,host=85:00.0,x-nv-gpudirect-clique=8 \
> -device vfio-pci,host=86:00.0,x-nv-gpudirect-clique=8 \
> -device vfio-pci,host=89:00.0,x-nv-gpudirect-clique=8 \
> -device vfio-pci,host=8a:00.0,x-nv-gpudirect-clique=8 \
>
> Hang. VNC couldn't connect.
>
>
> My personal patch used to work, although it was done by straightforward
> hacking and not that friendly to read.
>
> --- a/hw/vfio/pci.c
> +++ b/hw/vfio/pci.c
>
>  @@static int vfio_initfn(PCIDevice *pdev)
>
>     vfio_add_emulated_long(vdev, 0xc8, 0x50080009, ~0);
>     if (count < 4)
>     {
>         vfio_add_emulated_long(vdev, 0xcc, 0x00005032, ~0);
>     }
>     else
>     {
>         vfio_add_emulated_long(vdev, 0xcc, 0x00085032, ~0);
>     }
>     vfio_add_emulated_word(vdev, 0x78, 0xc810, ~0);
>
> 2017-08-30 6:05 GMT+08:00 Alex Williamson <address@hidden>:
>
>> NVIDIA has a specification for exposing a virtual vendor capability
>> which provides a hint to guest drivers as to which sets of GPUs can
>> support direct peer-to-peer DMA.  Devices with the same clique ID are
>> expected to support this.  The user can specify a clique ID for an
>> NVIDIA graphics device using the new vfio-pci x-nv-gpudirect-clique=
>> option, where valid clique IDs are a 4-bit integer.  It's entirely the
>> user's responsibility to specify sets of devices for which P2P works
>> correctly and provides some benefit.  This is only useful for DMA
>> between NVIDIA GPUs, therefore it's only useful to specify cliques
>> comprised of more than one GPU.  Furthermore, this does not enable DMA
>> between VMs, there is no change to VM DMA mapping, this only exposes
>> hints about existing DMA paths to the guest driver.  Thanks,
>>
>> Alex
>>
>> ---
>>
>> Alex Williamson (3):
>>       vfio/pci: Do not unwind on error
>>       vfio/pci: Add virtual capabilities quirk infrastructure
>>       vfio/pci: Add NVIDIA GPUDirect Cliques support
>>
>>
>>  hw/vfio/pci-quirks.c |  114 ++++++++++++++++++++++++++++++
>> ++++++++++++++++++++
>>  hw/vfio/pci.c        |   17 +++++++
>>  hw/vfio/pci.h        |    4 ++
>>  3 files changed, 133 insertions(+), 2 deletions(-)
>>
>
>