[Qemu-devel] [PATCH v6 06/13] xilinx_spips: Update striping to be big-endian bit order

[Francisco Iglesias]

Update striping functionality to be big-endian bit order (as according to
the Zynq-7000 Technical Reference Manual). Output thereafter the even bits
into the flash memory connected to the lower QSPI bus and the odd bits into
the flash memory connected to the upper QSPI bus.

Signed-off-by: Francisco Iglesias <address@hidden>
---
 hw/ssi/xilinx_spips.c | 19 ++++++++++---------
 1 file changed, 10 insertions(+), 9 deletions(-)

diff --git a/hw/ssi/xilinx_spips.c b/hw/ssi/xilinx_spips.c
index 559fa79..7accf5d 100644
--- a/hw/ssi/xilinx_spips.c
+++ b/hw/ssi/xilinx_spips.c
@@ -208,14 +208,14 @@ static void xilinx_spips_reset(DeviceState *d)
     xilinx_spips_update_cs_lines(s);
 }
 
-/* N way (num) in place bit striper. Lay out row wise bits (LSB to MSB)
+/* N way (num) in place bit striper. Lay out row wise bits (MSB to LSB)
  * column wise (from element 0 to N-1). num is the length of x, and dir
  * reverses the direction of the transform. Best illustrated by example:
  * Each digit in the below array is a single bit (num == 3):
  *
- * {{ 76543210, }  ----- stripe (dir == false) -----> {{ FCheb630, }
- *  { hgfedcba, }                                      { GDAfc741, }
- *  { HGFEDCBA, }} <---- upstripe (dir == true) -----  { HEBgda52, }}
+ * {{ 76543210, }  ----- stripe (dir == false) -----> {{ 741gdaFC, }
+ *  { hgfedcba, }                                      { 630fcHEB, }
+ *  { HGFEDCBA, }} <---- upstripe (dir == true) -----  { 52hebGDA, }}
  */
 
 static inline void stripe8(uint8_t *x, int num, bool dir)
@@ -223,15 +223,15 @@ static inline void stripe8(uint8_t *x, int num, bool dir)
     uint8_t r[num];
     memset(r, 0, sizeof(uint8_t) * num);
     int idx[2] = {0, 0};
-    int bit[2] = {0, 0};
+    int bit[2] = {0, 7};
     int d = dir;
 
     for (idx[0] = 0; idx[0] < num; ++idx[0]) {
-        for (bit[0] = 0; bit[0] < 8; ++bit[0]) {
-            r[idx[d]] |= x[idx[!d]] & 1 << bit[!d] ? 1 << bit[d] : 0;
+        for (bit[0] = 7; bit[0] != -1; bit[0] += -1) {
+            r[idx[!d]] |= x[idx[d]] & 1 << bit[d] ? 1 << bit[!d] : 0;
             idx[1] = (idx[1] + 1) % num;
             if (!idx[1]) {
-                bit[1]++;
+                bit[1] += -1;
             }
         }
     }
@@ -266,8 +266,9 @@ static void xilinx_spips_flush_txfifo(XilinxSPIPS *s)
         }
 
         for (i = 0; i < num_effective_busses(s); ++i) {
+            int bus = num_effective_busses(s) - 1 - i;
             DB_PRINT_L(debug_level, "tx = %02x\n", tx_rx[i]);
-            tx_rx[i] = ssi_transfer(s->spi[i], (uint32_t)tx_rx[i]);
+            tx_rx[i] = ssi_transfer(s->spi[bus], (uint32_t)tx_rx[i]);
             DB_PRINT_L(debug_level, "rx = %02x\n", tx_rx[i]);
         }
 
-- 
2.9.3