[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH] BCM2837 and machine raspi3
From: |
bzt bzt |
Subject: |
[Qemu-devel] [PATCH] BCM2837 and machine raspi3 |
Date: |
Sun, 22 Oct 2017 15:20:37 +0200 |
Dear All,
I've added support for "-M raspi3" to qemu. This is my first patch, I hope
it's okay. The github repo is here: https://github.com/bztsrc/qemu-raspi3
in case my patch does not work for some reason.
>From 1f10f957b57f336728097803bf8339a5577dd3c2 Mon Sep 17 00:00:00 2001
From: bzt <address@hidden>
Date: Sun, 22 Oct 2017 14:59:20 +0200
Subject: [PATCH] BCM2837 and machine raspi3
Signed-off-by: bzt <address@hidden>
---
hw/arm/Makefile.objs | 2 +-
hw/arm/bcm2835_peripherals.c | 10 ++-
hw/arm/bcm2836.c | 6 --
hw/arm/bcm2837.c | 179
++++++++++++++++++++++++++++++++++++++++
hw/arm/raspi.c | 79 ++++++++++++++++--
include/hw/arm/bcm2836.h | 6 ++
include/hw/arm/bcm2837.h | 19 +++++
include/hw/arm/raspi_platform.h | 2 +-
8 files changed, 287 insertions(+), 16 deletions(-)
create mode 100644 hw/arm/bcm2837.c
create mode 100644 include/hw/arm/bcm2837.h
diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs
index 2794e08..72b60e1 100644
--- a/hw/arm/Makefile.objs
+++ b/hw/arm/Makefile.objs
@@ -11,7 +11,7 @@ obj-y += armv7m.o exynos4210.o pxa2xx.o pxa2xx_gpio.o
pxa2xx_pic.o
obj-$(CONFIG_DIGIC) += digic.o
obj-y += omap1.o omap2.o strongarm.o
obj-$(CONFIG_ALLWINNER_A10) += allwinner-a10.o cubieboard.o
-obj-$(CONFIG_RASPI) += bcm2835_peripherals.o bcm2836.o raspi.o
+obj-$(CONFIG_RASPI) += bcm2835_peripherals.o bcm2836.o bcm2837.o raspi.o
obj-$(CONFIG_STM32F205_SOC) += stm32f205_soc.o
obj-$(CONFIG_XLNX_ZYNQMP) += xlnx-zynqmp.o xlnx-zcu102.o
obj-$(CONFIG_FSL_IMX25) += fsl-imx25.o imx25_pdk.o
diff --git a/hw/arm/bcm2835_peripherals.c b/hw/arm/bcm2835_peripherals.c
index 12e0dd1..f79ce36 100644
--- a/hw/arm/bcm2835_peripherals.c
+++ b/hw/arm/bcm2835_peripherals.c
@@ -212,7 +212,15 @@ static void bcm2835_peripherals_realize(DeviceState
*dev, Error **errp)
error_propagate(errp, err);
return;
}
-
+ // check if parameters are valid
+ if (ram_size < vcram_size + 64*1024*1024) {
+ error_setg(errp, "%s: not enough ram for VideoCore",
+ __func__);
+ return;
+ }
+ // if vcram_size is bigger than ram_size, this will silently overflow
+ // and generate a not very informative "Parameter 'vcram-base' expects
+ // uint32_t" message...
object_property_set_uint(OBJECT(&s->fb), ram_size - vcram_size,
"vcram-base", &err);
if (err) {
diff --git a/hw/arm/bcm2836.c b/hw/arm/bcm2836.c
index 8c43291..db40c8e 100644
--- a/hw/arm/bcm2836.c
+++ b/hw/arm/bcm2836.c
@@ -17,12 +17,6 @@
#include "hw/sysbus.h"
#include "exec/address-spaces.h"
-/* Peripheral base address seen by the CPU */
-#define BCM2836_PERI_BASE 0x3F000000
-
-/* "QA7" (Pi2) interrupt controller and mailboxes etc. */
-#define BCM2836_CONTROL_BASE 0x40000000
-
static void bcm2836_init(Object *obj)
{
BCM2836State *s = BCM2836(obj);
diff --git a/hw/arm/bcm2837.c b/hw/arm/bcm2837.c
new file mode 100644
index 0000000..1bab93b
--- /dev/null
+++ b/hw/arm/bcm2837.c
@@ -0,0 +1,179 @@
+/*
+ * Raspberry Pi emulation (c) 2012 Gregory Estrade
+ * Upstreaming code cleanup [including bcm2835_*] (c) 2013 Jan Petrous
+ *
+ * Rasperry Pi 2 emulation and refactoring Copyright (c) 2015, Microsoft
+ * Written by Andrew Baumann
+ *
+ * Raspberry Pi 3 emulation 2017 by bzt
+ *
+ * This code is licensed under the GNU GPLv2 and later.
+ */
+
+#include "qemu/osdep.h"
+#include "qapi/error.h"
+#include "qemu-common.h"
+#include "cpu.h"
+#include "hw/arm/bcm2836.h"
+#include "hw/arm/bcm2837.h"
+#include "hw/arm/raspi_platform.h"
+#include "hw/sysbus.h"
+#include "exec/address-spaces.h"
+
+/* According to
https://www.raspberrypi.org/documentation/hardware/raspberrypi/bcm2837/README.md
+ * The underlying architecture of the BCM2837 is identical to the BCM2836.
The only significant
+ * difference is the replacement of the ARMv7 quad core cluster with a
quad-core ARM Cortex A53
+ * (ARMv8) cluster. So we use cortex-a53- here. */
+
+static void bcm2837_init(Object *obj)
+{
+ BCM2836State *s = BCM2837(obj);
+ int n;
+
+ for (n = 0; n < BCM2836_NCPUS; n++) {
+ object_initialize(&s->cpus[n], sizeof(s->cpus[n]),
+ "cortex-a53-" TYPE_ARM_CPU);
+ object_property_add_child(obj, "cpu[*]", OBJECT(&s->cpus[n]),
+ &error_abort);
+ }
+
+ object_initialize(&s->control, sizeof(s->control),
TYPE_BCM2836_CONTROL);
+ object_property_add_child(obj, "control", OBJECT(&s->control), NULL);
+ qdev_set_parent_bus(DEVICE(&s->control), sysbus_get_default());
+
+ object_initialize(&s->peripherals, sizeof(s->peripherals),
+ TYPE_BCM2835_PERIPHERALS);
+ object_property_add_child(obj, "peripherals", OBJECT(&s->peripherals),
+ &error_abort);
+ object_property_add_alias(obj, "board-rev", OBJECT(&s->peripherals),
+ "board-rev", &error_abort);
+ object_property_add_alias(obj, "vcram-size", OBJECT(&s->peripherals),
+ "vcram-size", &error_abort);
+ qdev_set_parent_bus(DEVICE(&s->peripherals), sysbus_get_default());
+}
+
+static void bcm2837_realize(DeviceState *dev, Error **errp)
+{
+ BCM2836State *s = BCM2837(dev);
+ Object *obj;
+ Error *err = NULL;
+ int n;
+
+ /* common peripherals from bcm2835 */
+
+ obj = object_property_get_link(OBJECT(dev), "ram", &err);
+ if (obj == NULL) {
+ error_setg(errp, "%s: required ram link not found: %s",
+ __func__, error_get_pretty(err));
+ return;
+ }
+
+ object_property_add_const_link(OBJECT(&s->peripherals), "ram", obj,
&err);
+ if (err) {
+ error_propagate(errp, err);
+ return;
+ }
+
+ object_property_set_bool(OBJECT(&s->peripherals), true, "realized",
&err);
+ if (err) {
+ error_propagate(errp, err);
+ return;
+ }
+
+ object_property_add_alias(OBJECT(s), "sd-bus", OBJECT(&s->peripherals),
+ "sd-bus", &err);
+ if (err) {
+ error_propagate(errp, err);
+ return;
+ }
+
+ sysbus_mmio_map_overlap(SYS_BUS_DEVICE(&s->peripherals), 0,
+ BCM2836_PERI_BASE, 1);
+
+ /* bcm2836 interrupt controller (and mailboxes, etc.) */
+ object_property_set_bool(OBJECT(&s->control), true, "realized", &err);
+ if (err) {
+ error_propagate(errp, err);
+ return;
+ }
+
+ sysbus_mmio_map(SYS_BUS_DEVICE(&s->control), 0, BCM2836_CONTROL_BASE);
+
+ sysbus_connect_irq(SYS_BUS_DEVICE(&s->peripherals), 0,
+ qdev_get_gpio_in_named(DEVICE(&s->control), "gpu-irq", 0));
+ sysbus_connect_irq(SYS_BUS_DEVICE(&s->peripherals), 1,
+ qdev_get_gpio_in_named(DEVICE(&s->control), "gpu-fiq", 0));
+
+ for (n = 0; n < BCM2836_NCPUS; n++) {
+ /* Mirror bcm2836, which has clusterid set to 0xf
+ * TODO: this should be converted to a property of ARM_CPU
+ */
+ s->cpus[n].mp_affinity = 0xF00 | n;
+
+ /* set periphbase/CBAR value for CPU-local registers */
+ object_property_set_int(OBJECT(&s->cpus[n]),
+ BCM2836_PERI_BASE + MCORE_OFFSET,
+ "reset-cbar", &err);
+ if (err) {
+ error_propagate(errp, err);
+ return;
+ }
+
+ /* start powered off if not enabled */
+ object_property_set_bool(OBJECT(&s->cpus[n]), n >= s->enabled_cpus,
+ "start-powered-off", &err);
+ if (err) {
+ error_propagate(errp, err);
+ return;
+ }
+
+ object_property_set_bool(OBJECT(&s->cpus[n]), true, "realized",
&err);
+ if (err) {
+ error_propagate(errp, err);
+ return;
+ }
+
+ /* Connect irq/fiq outputs from the interrupt controller. */
+ qdev_connect_gpio_out_named(DEVICE(&s->control), "irq", n,
+ qdev_get_gpio_in(DEVICE(&s->cpus[n]), ARM_CPU_IRQ));
+ qdev_connect_gpio_out_named(DEVICE(&s->control), "fiq", n,
+ qdev_get_gpio_in(DEVICE(&s->cpus[n]), ARM_CPU_FIQ));
+
+ /* Connect timers from the CPU to the interrupt controller */
+ qdev_connect_gpio_out(DEVICE(&s->cpus[n]), GTIMER_PHYS,
+ qdev_get_gpio_in_named(DEVICE(&s->control), "cntpnsirq",
n));
+ qdev_connect_gpio_out(DEVICE(&s->cpus[n]), GTIMER_VIRT,
+ qdev_get_gpio_in_named(DEVICE(&s->control), "cntvirq", n));
+ qdev_connect_gpio_out(DEVICE(&s->cpus[n]), GTIMER_HYP,
+ qdev_get_gpio_in_named(DEVICE(&s->control), "cnthpirq",
n));
+ qdev_connect_gpio_out(DEVICE(&s->cpus[n]), GTIMER_SEC,
+ qdev_get_gpio_in_named(DEVICE(&s->control), "cntpsirq",
n));
+ }
+}
+
+static Property bcm2837_props[] = {
+ DEFINE_PROP_UINT32("enabled-cpus", BCM2836State, enabled_cpus,
BCM2836_NCPUS),
+ DEFINE_PROP_END_OF_LIST()
+};
+
+static void bcm2837_class_init(ObjectClass *oc, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(oc);
+ dc->props = bcm2837_props;
+ dc->realize = bcm2837_realize;
+}
+
+static const TypeInfo bcm2837_type_info = {
+ .name = TYPE_BCM2837,
+ .parent = TYPE_SYS_BUS_DEVICE,
+ .instance_size = sizeof(BCM2836State),
+ .instance_init = bcm2837_init,
+ .class_init = bcm2837_class_init,
+};
+
+static void bcm2837_register_types(void)
+{
+ type_register_static(&bcm2837_type_info);
+}
+
+type_init(bcm2837_register_types)
diff --git a/hw/arm/raspi.c b/hw/arm/raspi.c
index 5941c9f..726a426 100644
--- a/hw/arm/raspi.c
+++ b/hw/arm/raspi.c
@@ -5,6 +5,8 @@
* Rasperry Pi 2 emulation Copyright (c) 2015, Microsoft
* Written by Andrew Baumann
*
+ * Raspberry Pi 3 emulation 2017 by bzt
+ *
* This code is licensed under the GNU GPLv2 and later.
*/
@@ -13,6 +15,7 @@
#include "qemu-common.h"
#include "cpu.h"
#include "hw/arm/bcm2836.h"
+#include "hw/arm/bcm2837.h"
#include "qemu/error-report.h"
#include "hw/boards.h"
#include "hw/loader.h"
@@ -22,10 +25,11 @@
#define SMPBOOT_ADDR 0x300 /* this should leave enough space for ATAGS
*/
#define MVBAR_ADDR 0x400 /* secure vectors */
#define BOARDSETUP_ADDR (MVBAR_ADDR + 0x20) /* board setup code */
-#define FIRMWARE_ADDR 0x8000 /* Pi loads kernel.img here by default */
+#define FIRMWARE_ADDR_2 0x8000 /* Pi 2 loads kernel.img here by default
*/
+#define FIRMWARE_ADDR_3 0x80000 /* Pi 3 loads kernel8.img here by
default */
/* Table of Linux board IDs for different Pi versions */
-static const int raspi_boardid[] = {[1] = 0xc42, [2] = 0xc43};
+static const int raspi_boardid[] = {[1] = 0xc42, [2] = 0xc43, [3] = 0xc44};
typedef struct RasPiState {
BCM2836State soc;
@@ -73,6 +77,7 @@ static void reset_secondary(ARMCPU *cpu, const struct
arm_boot_info *info)
static void setup_boot(MachineState *machine, int version, size_t ram_size)
{
static struct arm_boot_info binfo;
+ hwaddr entry;
int r;
binfo.board_id = raspi_boardid[version];
@@ -83,11 +88,12 @@ static void setup_boot(MachineState *machine, int
version, size_t ram_size)
binfo.secure_board_setup = true;
binfo.secure_boot = true;
- /* Pi2 requires SMP setup */
- if (version == 2) {
+ /* Pi2 and Pi3 requires SMP setup */
+ if (version == 2 || version == 3) {
binfo.smp_loader_start = SMPBOOT_ADDR;
binfo.write_secondary_boot = write_smpboot;
binfo.secondary_cpu_reset_hook = reset_secondary;
+ entry = version == 2 ? FIRMWARE_ADDR_2 : FIRMWARE_ADDR_3;
}
/* If the user specified a "firmware" image (e.g. UEFI), we bypass
@@ -95,14 +101,14 @@ static void setup_boot(MachineState *machine, int
version, size_t ram_size)
*/
if (machine->firmware) {
/* load the firmware image (typically kernel.img) */
- r = load_image_targphys(machine->firmware, FIRMWARE_ADDR,
- ram_size - FIRMWARE_ADDR);
+ r = load_image_targphys(machine->firmware, entry,
+ ram_size - entry);
if (r < 0) {
error_report("Failed to load firmware from %s",
machine->firmware);
exit(1);
}
- binfo.entry = FIRMWARE_ADDR;
+ binfo.entry = entry;
binfo.firmware_loaded = true;
} else {
binfo.kernel_filename = machine->kernel_filename;
@@ -171,3 +177,62 @@ static void raspi2_machine_init(MachineClass *mc)
mc->ignore_memory_transaction_failures = true;
};
DEFINE_MACHINE("raspi2", raspi2_machine_init)
+
+static void raspi3_init(MachineState *machine)
+{
+ RasPiState *s = g_new0(RasPiState, 1);
+ uint32_t vcram_size;
+ DriveInfo *di;
+ BlockBackend *blk;
+ BusState *bus;
+ DeviceState *carddev;
+
+ object_initialize(&s->soc, sizeof(s->soc), TYPE_BCM2837);
+ object_property_add_child(OBJECT(machine), "soc", OBJECT(&s->soc),
+ &error_abort);
+
+ /* Allocate and map RAM */
+ memory_region_allocate_system_memory(&s->ram, OBJECT(machine), "ram",
+ machine->ram_size);
+ /* FIXME: Remove when we have custom CPU address space support */
+ memory_region_add_subregion_overlap(get_system_memory(), 0, &s->ram,
0);
+
+ /* Setup the SOC */
+ object_property_add_const_link(OBJECT(&s->soc), "ram", OBJECT(&s->ram),
+ &error_abort);
+ object_property_set_int(OBJECT(&s->soc), smp_cpus, "enabled-cpus",
+ &error_abort);
+ object_property_set_int(OBJECT(&s->soc), 0xa02082, "board-rev",
+ &error_abort);
+ object_property_set_bool(OBJECT(&s->soc), true, "realized",
&error_abort);
+
+ /* Create and plug in the SD cards */
+ di = drive_get_next(IF_SD);
+ blk = di ? blk_by_legacy_dinfo(di) : NULL;
+ bus = qdev_get_child_bus(DEVICE(&s->soc), "sd-bus");
+ if (bus == NULL) {
+ error_report("No SD bus found in SOC object");
+ exit(1);
+ }
+ carddev = qdev_create(bus, TYPE_SD_CARD);
+ qdev_prop_set_drive(carddev, "drive", blk, &error_fatal);
+ object_property_set_bool(OBJECT(carddev), true, "realized",
&error_fatal);
+
+ vcram_size = object_property_get_uint(OBJECT(&s->soc), "vcram-size",
+ &error_abort);
+ setup_boot(machine, 3, machine->ram_size - vcram_size);
+}
+
+static void raspi3_machine_init(MachineClass *mc)
+{
+ mc->desc = "Raspberry Pi 3";
+ mc->init = raspi3_init;
+ mc->block_default_type = IF_SD;
+ mc->no_parallel = 1;
+ mc->no_floppy = 1;
+ mc->no_cdrom = 1;
+ mc->max_cpus = BCM2836_NCPUS;
+ mc->default_ram_size = 1024 * 1024 * 1024;
+ mc->ignore_memory_transaction_failures = true;
+};
+DEFINE_MACHINE("raspi3", raspi3_machine_init)
diff --git a/include/hw/arm/bcm2836.h b/include/hw/arm/bcm2836.h
index 76de199..ee6b9dc 100644
--- a/include/hw/arm/bcm2836.h
+++ b/include/hw/arm/bcm2836.h
@@ -20,6 +20,12 @@
#define BCM2836_NCPUS 4
+/* Peripheral base address seen by the CPU */
+#define BCM2836_PERI_BASE 0x3F000000
+
+/* "QA7" (Pi2/Pi8) interrupt controller and mailboxes etc. */
+#define BCM2836_CONTROL_BASE 0x40000000
+
typedef struct BCM2836State {
/*< private >*/
DeviceState parent_obj;
diff --git a/include/hw/arm/bcm2837.h b/include/hw/arm/bcm2837.h
new file mode 100644
index 0000000..5c7be8a
--- /dev/null
+++ b/include/hw/arm/bcm2837.h
@@ -0,0 +1,19 @@
+/*
+ * Raspberry Pi emulation (c) 2012 Gregory Estrade
+ * Upstreaming code cleanup [including bcm2835_*] (c) 2013 Jan Petrous
+ *
+ * Rasperry Pi 2 emulation and refactoring Copyright (c) 2015, Microsoft
+ * Written by Andrew Baumann
+ *
+ * This code is licensed under the GNU GPLv2 and later.
+ */
+
+#ifndef BCM2837_H
+#define BCM2837_H
+
+#include "hw/arm/bcm2836.h"
+
+#define TYPE_BCM2837 "bcm2837"
+#define BCM2837(obj) OBJECT_CHECK(BCM2836State, (obj), TYPE_BCM2837)
+
+#endif /* BCM2837_H */
diff --git a/include/hw/arm/raspi_platform.h
b/include/hw/arm/raspi_platform.h
index 6467e88..9e6910b 100644
--- a/include/hw/arm/raspi_platform.h
+++ b/include/hw/arm/raspi_platform.h
@@ -1,5 +1,5 @@
/*
- * bcm2708 aka bcm2835/2836 aka Raspberry Pi/Pi2 SoC platform defines
+ * bcm2708 aka bcm2835/2836/2837 aka Raspberry Pi/Pi2 SoC platform defines
*
* These definitions are derived from those in Raspbian Linux at
* arch/arm/mach-{bcm2708,bcm2709}/include/mach/platform.h
--
2.14.2
- [Qemu-devel] [PATCH] BCM2837 and machine raspi3,
bzt bzt <=