Re: [Qemu-devel] [PATCH v16 5/5] virtio-balloon: VIRTIO_BALLOON_F_CTRL_VQ

[Wei Wang]

On 10/10/2017 11:15 PM, Michael S. Tsirkin wrote:
> On Mon, Oct 02, 2017 at 04:38:01PM +0000, Wang, Wei W wrote:
> > On Sunday, October 1, 2017 11:19 AM, Michael S. Tsirkin wrote:
> > > On Sat, Sep 30, 2017 at 12:05:54PM +0800, Wei Wang wrote:
> > > > +static void ctrlq_send_cmd(struct virtio_balloon *vb,
> > > > +                         struct virtio_balloon_ctrlq_cmd *cmd,
> > > > +                         bool inbuf)
> > > > +{
> > > > +       struct virtqueue *vq = vb->ctrl_vq;
> > > > +
> > > > +       ctrlq_add_cmd(vq, cmd, inbuf);
> > > > +       if (!inbuf) {
> > > > +               /*
> > > > +                * All the input cmd buffers are replenished here.
> > > > +                * This is necessary because the input cmd buffers are lost
> > > > +                * after live migration. The device needs to rewind all of
> > > > +                * them from the ctrl_vq.
> > > Confused. Live migration somehow loses state? Why is that and why is it a good
> > > idea? And how do you know this is migration even?
> > > Looks like all you know is you got free page end. Could be any reason for this.
> >
> > I think this would be something that the current live migration lacks - what the
> > device read from the vq is not transferred during live migration, an example is 
> > the
> > stat_vq_elem:
> > Line 476 at https://github.com/qemu/qemu/blob/master/hw/virtio/virtio-balloon.c
> This does not touch guest memory though it just manipulates
> internal state to make it easier to migrate.
> It's transparent to guest as migration should be.
>
> > For all the things that are added to the vq and need to be held by the device
> > to use later need to consider the situation that live migration might happen at 
> > any
> > time and they need to be re-taken from the vq by the device on the destination
> > machine.
> >
> > So, even without this live migration optimization feature, I think all the 
> > things that are
> > added to the vq for the device to hold, need a way for the device to rewind 
> > back from
> > the vq - re-adding all the elements to the vq is a trick to keep a record of 
> > all of them
> > on the vq so that the device side rewinding can work.
> >
> > Please let me know if anything is missed or if you have other suggestions.
> IMO migration should pass enough data source to destination for
> destination to continue where source left off without guest help.

I'm afraid it would be difficult to pass the entire VirtQueueElement to 
the destination. I think
that would also be the reason that stats_vq_elem chose to rewind from 
the guest vq, which re-do the
virtqueue_pop() --> virtqueue_map_desc() steps (the QEMU virtual address 
to the guest physical
address relationship may be changed on the destination).


How about another direction which would be easier - using two 32-bit 
device specific configuration registers,
Host2Guest and Guest2Host command registers, to replace the ctrlq for 
command exchange:

The flow can be as follows:

1) Before Host sending a StartCMD, it flushes the free_page_vq in case 
any old free page hint is left there;

2) Host writes StartCMD to the Host2Guest register, and notifies the guest;

3) Upon receiving a configuration notification, Guest reads the 
Host2Guest register, and detaches all the used buffers from free_page_vq;
(then for each StartCMD, the free_page_vq will always have no obsolete 
free page hints, right? )

4) Guest start report free pages:
    4.1) Host may actively write StopCMD to the Host2Guest register 
before the guest finishes; or
    4.2) Guest finishes reporting, write StopCMD  the Guest2HOST 
register, which traps to QEMU, to stop.


Best,
Wei