qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PULL 19/54] qcow2: Switch store_bitmap_data() to byte-base


From: Kevin Wolf
Subject: [Qemu-devel] [PULL 19/54] qcow2: Switch store_bitmap_data() to byte-based iteration
Date: Fri, 6 Oct 2017 17:53:47 +0200

From: Eric Blake <address@hidden>

Now that we have adjusted the majority of the calls this function
makes to be byte-based, it is easier to read the code if it makes
passes over the image using bytes rather than sectors.

iotests 165 was rather weak - on a default 64k-cluster image, where
bitmap granularity also defaults to 64k bytes, a single cluster of
the bitmap table thus covers (64*1024*8) bits which each cover 64k
bytes, or 32G of image space.  But the test only uses a 1G image,
so it cannot trigger any more than one loop of the code in
store_bitmap_data(); and it was writing to the first cluster.  In
order to test that we are properly aligning which portions of the
bitmap are being written to the file, we really want to test a case
where the first dirty bit returned by bdrv_dirty_iter_next() is not
aligned to the start of a cluster, which we can do by modifying the
test to write data that doesn't happen to fall in the first cluster
of the image.

Signed-off-by: Eric Blake <address@hidden>
Reviewed-by: Vladimir Sementsov-Ogievskiy <address@hidden>
Reviewed-by: John Snow <address@hidden>
Reviewed-by: Fam Zheng <address@hidden>
Signed-off-by: Kevin Wolf <address@hidden>
---
 block/qcow2-bitmap.c   | 31 ++++++++++++++++---------------
 tests/qemu-iotests/165 |  2 +-
 2 files changed, 17 insertions(+), 16 deletions(-)

diff --git a/block/qcow2-bitmap.c b/block/qcow2-bitmap.c
index 02512a21f2..f45e46cfbd 100644
--- a/block/qcow2-bitmap.c
+++ b/block/qcow2-bitmap.c
@@ -1072,10 +1072,9 @@ static uint64_t *store_bitmap_data(BlockDriverState *bs,
 {
     int ret;
     BDRVQcow2State *s = bs->opaque;
-    int64_t sector;
-    uint64_t limit, sbc;
+    int64_t offset;
+    uint64_t limit;
     uint64_t bm_size = bdrv_dirty_bitmap_size(bitmap);
-    uint64_t bm_sectors = DIV_ROUND_UP(bm_size, BDRV_SECTOR_SIZE);
     const char *bm_name = bdrv_dirty_bitmap_name(bitmap);
     uint8_t *buf = NULL;
     BdrvDirtyBitmapIter *dbi;
@@ -1100,18 +1099,22 @@ static uint64_t *store_bitmap_data(BlockDriverState *bs,
     dbi = bdrv_dirty_iter_new(bitmap);
     buf = g_malloc(s->cluster_size);
     limit = bytes_covered_by_bitmap_cluster(s, bitmap);
-    sbc = limit >> BDRV_SECTOR_BITS;
     assert(DIV_ROUND_UP(bm_size, limit) == tb_size);
 
-    while ((sector = bdrv_dirty_iter_next(dbi) >> BDRV_SECTOR_BITS) >= 0) {
-        uint64_t cluster = sector / sbc;
+    while ((offset = bdrv_dirty_iter_next(dbi)) >= 0) {
+        uint64_t cluster = offset / limit;
         uint64_t end, write_size;
         int64_t off;
 
-        sector = cluster * sbc;
-        end = MIN(bm_sectors, sector + sbc);
-        write_size = bdrv_dirty_bitmap_serialization_size(bitmap,
-            sector * BDRV_SECTOR_SIZE, (end - sector) * BDRV_SECTOR_SIZE);
+        /*
+         * We found the first dirty offset, but want to write out the
+         * entire cluster of the bitmap that includes that offset,
+         * including any leading zero bits.
+         */
+        offset = QEMU_ALIGN_DOWN(offset, limit);
+        end = MIN(bm_size, offset + limit);
+        write_size = bdrv_dirty_bitmap_serialization_size(bitmap, offset,
+                                                          end - offset);
         assert(write_size <= s->cluster_size);
 
         off = qcow2_alloc_clusters(bs, s->cluster_size);
@@ -1123,9 +1126,7 @@ static uint64_t *store_bitmap_data(BlockDriverState *bs,
         }
         tb[cluster] = off;
 
-        bdrv_dirty_bitmap_serialize_part(bitmap, buf,
-                                         sector * BDRV_SECTOR_SIZE,
-                                         (end - sector) * BDRV_SECTOR_SIZE);
+        bdrv_dirty_bitmap_serialize_part(bitmap, buf, offset, end - offset);
         if (write_size < s->cluster_size) {
             memset(buf + write_size, 0, s->cluster_size - write_size);
         }
@@ -1143,11 +1144,11 @@ static uint64_t *store_bitmap_data(BlockDriverState *bs,
             goto fail;
         }
 
-        if (end >= bm_sectors) {
+        if (end >= bm_size) {
             break;
         }
 
-        bdrv_set_dirty_iter(dbi, end * BDRV_SECTOR_SIZE);
+        bdrv_set_dirty_iter(dbi, end);
     }
 
     *bitmap_table_size = tb_size;
diff --git a/tests/qemu-iotests/165 b/tests/qemu-iotests/165
index 74d7b79a0b..a3932db3de 100755
--- a/tests/qemu-iotests/165
+++ b/tests/qemu-iotests/165
@@ -27,7 +27,7 @@ disk = os.path.join(iotests.test_dir, 'disk')
 disk_size = 0x40000000 # 1G
 
 # regions for qemu_io: (start, count) in bytes
-regions1 = ((0,        0x100000),
+regions1 = ((0x0fff00, 0x10000),
             (0x200000, 0x100000))
 
 regions2 = ((0x10000000, 0x20000),
-- 
2.13.6




reply via email to

[Prev in Thread] Current Thread [Next in Thread]