[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH 2/3] migration: Cancel migration at exit
From: |
Peter Xu |
Subject: |
Re: [Qemu-devel] [PATCH 2/3] migration: Cancel migration at exit |
Date: |
Mon, 18 Sep 2017 15:31:59 +0800 |
User-agent: |
Mutt/1.5.24 (2015-08-30) |
On Fri, Sep 15, 2017 at 10:22:43AM +0100, Dr. David Alan Gilbert wrote:
> * Fam Zheng (address@hidden) wrote:
> > On Fri, 09/15 09:42, Dr. David Alan Gilbert wrote:
> > > * Fam Zheng (address@hidden) wrote:
> > > > On Fri, 09/15 16:03, Peter Xu wrote:
> > > > > On Fri, Sep 15, 2017 at 01:44:03PM +0800, Fam Zheng wrote:
> > > > > > bdrv_close_all() would abort() due to op blockers added by BMDS,
> > > > > > clean
> > > > > > up migration states when main loop quits to avoid that.
> > > > > >
> > > > > > Signed-off-by: Fam Zheng <address@hidden>
> > > > > > ---
> > > > > > include/migration/misc.h | 1 +
> > > > > > migration/migration.c | 7 ++++++-
> > > > > > vl.c | 3 +++
> > > > > > 3 files changed, 10 insertions(+), 1 deletion(-)
> > > > > >
> > > > > > diff --git a/include/migration/misc.h b/include/migration/misc.h
> > > > > > index c079b7771b..b9a26b0898 100644
> > > > > > --- a/include/migration/misc.h
> > > > > > +++ b/include/migration/misc.h
> > > > > > @@ -54,5 +54,6 @@ bool migration_has_failed(MigrationState *);
> > > > > > /* ...and after the device transmission */
> > > > > > bool migration_in_postcopy_after_devices(MigrationState *);
> > > > > > void migration_global_dump(Monitor *mon);
> > > > > > +void migrate_cancel(void);
> > > > > >
> > > > > > #endif
> > > > > > diff --git a/migration/migration.c b/migration/migration.c
> > > > > > index 959e8ec88e..2c844945c7 100644
> > > > > > --- a/migration/migration.c
> > > > > > +++ b/migration/migration.c
> > > > > > @@ -1274,11 +1274,16 @@ void qmp_migrate(const char *uri, bool
> > > > > > has_blk, bool blk,
> > > > > > }
> > > > > > }
> > > > > >
> > > > > > -void qmp_migrate_cancel(Error **errp)
> > > > > > +void migrate_cancel(void)
> > > > > > {
> > > > > > migrate_fd_cancel(migrate_get_current());
> > > > > > }
> > > > > >
> > > > > > +void qmp_migrate_cancel(Error **errp)
> > > > > > +{
> > > > > > + migrate_cancel();
> > > > > > +}
> > > > > > +
> > > > >
> > > > > Nit: I would prefer just call migrate_fd_cancel() below, since I don't
> > > > > see much point to introduce migrate_cancel() which only calls
> > > > > migrate_fd_cancel()...
> > > >
> > > > migrate_get_current() is a migration internal IMHO. But that can be
> > > > moved to
> > > > migrate_fd_cancel() so the parameter is dropped.
> > > >
> > > > >
> > > > > > void qmp_migrate_set_cache_size(int64_t value, Error **errp)
> > > > > > {
> > > > > > MigrationState *s = migrate_get_current();
> > > > > > diff --git a/vl.c b/vl.c
> > > > > > index fb1f05b937..abbe61f40b 100644
> > > > > > --- a/vl.c
> > > > > > +++ b/vl.c
> > > > > > @@ -87,6 +87,7 @@ int main(int argc, char **argv)
> > > > > > #include "sysemu/blockdev.h"
> > > > > > #include "hw/block/block.h"
> > > > > > #include "migration/misc.h"
> > > > > > +#include "migration/savevm.h"
> > > > > > #include "migration/snapshot.h"
> > > > > > #include "migration/global_state.h"
> > > > > > #include "sysemu/tpm.h"
> > > > > > @@ -4799,6 +4800,8 @@ int main(int argc, char **argv, char **envp)
> > > > > > iothread_stop_all();
> > > > > >
> > > > > > pause_all_vcpus();
> > > > > > + migrate_cancel();
> > > > >
> > > > > IIUC this is an async cancel, so when reach here the migration thread
> > > > > can still be alive. Then...
> > > > >
> > > > > > + qemu_savevm_state_cleanup();
> > > > >
> > > > > ... Here calling qemu_savevm_state_cleanup() may be problematic if
> > > > > migration thread has not yet quitted.
> > > > >
> > > > > I'm thinking whether we should make migrate_fd_cancel() wait until the
> > > > > migration thread finishes (state change to CANCELLED). Then the
> > > > > migration thread will do the cleanup, and here we can avoid calling
> > > > > qemu_savevm_state_cleanup() as well.
> > > >
> > > > But if the migration thread is stuck and CANCELLED is never reached,
> > > > we'll hang
> > > > here?
> > >
> > > I'm not sure I see an easy fix; I agree with Peter that calling
> > > migrate_cancel() followed by qemu_savevm_state_cleanup() is racy,
> > > because the cancel just forces the state to CANCELLING before coming
> > > back to you, and the migration thread asynchronously starts to
> > > fail/cleanup.
> > >
> > > migrate_cancel() can forcibly unblock some cases because it calls
> > > shutdown(2) on the network fd, but there are other ways for a migration
> > > to hang.
> > >
> > > Having said that, the migration thread does it's calls
> > > to qemu_savevm_state_cleanup under the lock_iothread;
> > > Do we have that lock at this point?
> >
> > Yes we do. Main loop releases the lock only during poll(), other parts of
> > main() all have the lock.
>
> Having said that though this is pretty confusing; because at this point
> we're after main_loop has exited.
> I don't think the migration thread will exit without having taken the
> iothread lock; so if we've got it at this point then the migration
> thread will never exit, and it will never call qemu_savevm_state_cleanup
> itself - so that race might not exist?
Is that because we are taking the BQL in migration_thread()? Please
see my below questions...
>
> However, assuming the migration is at an earlier point, it might be
> calling one of the state handlers that you're cleaning up, and that's
> racy in individual devices.
>
> If we have the lock I don't think we can wait for the migration to
> complete/cancel. The transition from cancelling->cancelled happens
> in migrate_fd_cleanup() - and that's run of a bh which I assume don't
> work any more at this point.
>
> Perhaps the answer is to move this to qemu_system_shutdown_request prior
> to the point where shutdown_requested is set? At that point we've
> still got the main loop, although hmm I'm not convinced if it's
> consistent whether that's called with or without the lock held.
I do think the migration cleanup part needs some cleanup itself... :)
Actually I have two questions here about BQL and migration:
(1) I see that we took BQL in migration_thread(), but if the migration
thread is to be cancelled, could we avoid taking the lock for the
cancelling case right after we break from the big migration loop?
Since I don't see why we need it if we are after all going to
cancel the migration... (though this one may need some other
cleanups to let it work I guess)
(2) I see that we took BQL in migrate_fd_cleanup(). Could I ask why
we had that? Can we remove it?
--
Peter Xu
- Re: [Qemu-devel] [PATCH 1/3] migration: Allow ram_save_cleanup to be called with empty state, (continued)
[Qemu-devel] [PATCH 2/3] migration: Cancel migration at exit, Fam Zheng, 2017/09/15
- Re: [Qemu-devel] [PATCH 2/3] migration: Cancel migration at exit, Peter Xu, 2017/09/15
- Re: [Qemu-devel] [PATCH 2/3] migration: Cancel migration at exit, Fam Zheng, 2017/09/15
- Re: [Qemu-devel] [PATCH 2/3] migration: Cancel migration at exit, Peter Xu, 2017/09/15
- Re: [Qemu-devel] [PATCH 2/3] migration: Cancel migration at exit, Dr. David Alan Gilbert, 2017/09/15
- Re: [Qemu-devel] [PATCH 2/3] migration: Cancel migration at exit, Fam Zheng, 2017/09/15
- Re: [Qemu-devel] [PATCH 2/3] migration: Cancel migration at exit, Dr. David Alan Gilbert, 2017/09/15
- Re: [Qemu-devel] [PATCH 2/3] migration: Cancel migration at exit,
Peter Xu <=
- Re: [Qemu-devel] [PATCH 2/3] migration: Cancel migration at exit, Dr. David Alan Gilbert, 2017/09/18
- Re: [Qemu-devel] [PATCH 2/3] migration: Cancel migration at exit, Peter Xu, 2017/09/19
[Qemu-devel] [PATCH 3/3] iotests: Add "quit during block migration" case 195, Fam Zheng, 2017/09/15