[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v11 1/6] throttle: factor out duplicate code
|
From: |
Greg Kurz |
|
Subject: |
Re: [Qemu-devel] [PATCH v11 1/6] throttle: factor out duplicate code |
|
Date: |
Thu, 14 Sep 2017 13:12:51 +0200 |
On Thu, 14 Sep 2017 06:40:05 -0400
Pradeep Jagadeesh <address@hidden> wrote:
> This patch factors out the duplicate throttle code that was still
> present in block and fsdev devices.
>
> Signed-off-by: Pradeep Jagadeesh <address@hidden>
> Reviewed-by: Alberto Garcia <address@hidden>
> Reviewed-by: Greg Kurz <address@hidden>
I see you took my remarks into account, except for the patch title
which is still the very same as commit:
a2a7862ca9ab throttle: factor out duplicate code
:-\
> Reviewed-by: Eric Blake <address@hidden>
> ---
> blockdev.c | 44 +---------------------------------
> fsdev/qemu-fsdev-throttle.c | 44 ++--------------------------------
> include/qemu/throttle-options.h | 3 +++
> include/qemu/throttle.h | 4 ++--
> include/qemu/typedefs.h | 1 +
> util/throttle.c | 52
> +++++++++++++++++++++++++++++++++++++++++
> 6 files changed, 61 insertions(+), 87 deletions(-)
>
> diff --git a/blockdev.c b/blockdev.c
> index 56a6b24..9d33c25 100644
> --- a/blockdev.c
> +++ b/blockdev.c
> @@ -387,49 +387,7 @@ static void extract_common_blockdev_options(QemuOpts
> *opts, int *bdrv_flags,
> }
>
> if (throttle_cfg) {
> - throttle_config_init(throttle_cfg);
> - throttle_cfg->buckets[THROTTLE_BPS_TOTAL].avg =
> - qemu_opt_get_number(opts, "throttling.bps-total", 0);
> - throttle_cfg->buckets[THROTTLE_BPS_READ].avg =
> - qemu_opt_get_number(opts, "throttling.bps-read", 0);
> - throttle_cfg->buckets[THROTTLE_BPS_WRITE].avg =
> - qemu_opt_get_number(opts, "throttling.bps-write", 0);
> - throttle_cfg->buckets[THROTTLE_OPS_TOTAL].avg =
> - qemu_opt_get_number(opts, "throttling.iops-total", 0);
> - throttle_cfg->buckets[THROTTLE_OPS_READ].avg =
> - qemu_opt_get_number(opts, "throttling.iops-read", 0);
> - throttle_cfg->buckets[THROTTLE_OPS_WRITE].avg =
> - qemu_opt_get_number(opts, "throttling.iops-write", 0);
> -
> - throttle_cfg->buckets[THROTTLE_BPS_TOTAL].max =
> - qemu_opt_get_number(opts, "throttling.bps-total-max", 0);
> - throttle_cfg->buckets[THROTTLE_BPS_READ].max =
> - qemu_opt_get_number(opts, "throttling.bps-read-max", 0);
> - throttle_cfg->buckets[THROTTLE_BPS_WRITE].max =
> - qemu_opt_get_number(opts, "throttling.bps-write-max", 0);
> - throttle_cfg->buckets[THROTTLE_OPS_TOTAL].max =
> - qemu_opt_get_number(opts, "throttling.iops-total-max", 0);
> - throttle_cfg->buckets[THROTTLE_OPS_READ].max =
> - qemu_opt_get_number(opts, "throttling.iops-read-max", 0);
> - throttle_cfg->buckets[THROTTLE_OPS_WRITE].max =
> - qemu_opt_get_number(opts, "throttling.iops-write-max", 0);
> -
> - throttle_cfg->buckets[THROTTLE_BPS_TOTAL].burst_length =
> - qemu_opt_get_number(opts, "throttling.bps-total-max-length", 1);
> - throttle_cfg->buckets[THROTTLE_BPS_READ].burst_length =
> - qemu_opt_get_number(opts, "throttling.bps-read-max-length", 1);
> - throttle_cfg->buckets[THROTTLE_BPS_WRITE].burst_length =
> - qemu_opt_get_number(opts, "throttling.bps-write-max-length", 1);
> - throttle_cfg->buckets[THROTTLE_OPS_TOTAL].burst_length =
> - qemu_opt_get_number(opts, "throttling.iops-total-max-length", 1);
> - throttle_cfg->buckets[THROTTLE_OPS_READ].burst_length =
> - qemu_opt_get_number(opts, "throttling.iops-read-max-length", 1);
> - throttle_cfg->buckets[THROTTLE_OPS_WRITE].burst_length =
> - qemu_opt_get_number(opts, "throttling.iops-write-max-length", 1);
> -
> - throttle_cfg->op_size =
> - qemu_opt_get_number(opts, "throttling.iops-size", 0);
> -
> + throttle_parse_options(throttle_cfg, opts);
> if (!throttle_is_valid(throttle_cfg, errp)) {
> return;
> }
> diff --git a/fsdev/qemu-fsdev-throttle.c b/fsdev/qemu-fsdev-throttle.c
> index 49eebb5..0e6fb86 100644
> --- a/fsdev/qemu-fsdev-throttle.c
> +++ b/fsdev/qemu-fsdev-throttle.c
> @@ -16,6 +16,7 @@
> #include "qemu/error-report.h"
> #include "qemu-fsdev-throttle.h"
> #include "qemu/iov.h"
> +#include "qemu/throttle-options.h"
>
> static void fsdev_throttle_read_timer_cb(void *opaque)
> {
> @@ -31,48 +32,7 @@ static void fsdev_throttle_write_timer_cb(void *opaque)
>
> void fsdev_throttle_parse_opts(QemuOpts *opts, FsThrottle *fst, Error **errp)
> {
> - throttle_config_init(&fst->cfg);
> - fst->cfg.buckets[THROTTLE_BPS_TOTAL].avg =
> - qemu_opt_get_number(opts, "throttling.bps-total", 0);
> - fst->cfg.buckets[THROTTLE_BPS_READ].avg =
> - qemu_opt_get_number(opts, "throttling.bps-read", 0);
> - fst->cfg.buckets[THROTTLE_BPS_WRITE].avg =
> - qemu_opt_get_number(opts, "throttling.bps-write", 0);
> - fst->cfg.buckets[THROTTLE_OPS_TOTAL].avg =
> - qemu_opt_get_number(opts, "throttling.iops-total", 0);
> - fst->cfg.buckets[THROTTLE_OPS_READ].avg =
> - qemu_opt_get_number(opts, "throttling.iops-read", 0);
> - fst->cfg.buckets[THROTTLE_OPS_WRITE].avg =
> - qemu_opt_get_number(opts, "throttling.iops-write", 0);
> -
> - fst->cfg.buckets[THROTTLE_BPS_TOTAL].max =
> - qemu_opt_get_number(opts, "throttling.bps-total-max", 0);
> - fst->cfg.buckets[THROTTLE_BPS_READ].max =
> - qemu_opt_get_number(opts, "throttling.bps-read-max", 0);
> - fst->cfg.buckets[THROTTLE_BPS_WRITE].max =
> - qemu_opt_get_number(opts, "throttling.bps-write-max", 0);
> - fst->cfg.buckets[THROTTLE_OPS_TOTAL].max =
> - qemu_opt_get_number(opts, "throttling.iops-total-max", 0);
> - fst->cfg.buckets[THROTTLE_OPS_READ].max =
> - qemu_opt_get_number(opts, "throttling.iops-read-max", 0);
> - fst->cfg.buckets[THROTTLE_OPS_WRITE].max =
> - qemu_opt_get_number(opts, "throttling.iops-write-max", 0);
> -
> - fst->cfg.buckets[THROTTLE_BPS_TOTAL].burst_length =
> - qemu_opt_get_number(opts, "throttling.bps-total-max-length", 1);
> - fst->cfg.buckets[THROTTLE_BPS_READ].burst_length =
> - qemu_opt_get_number(opts, "throttling.bps-read-max-length", 1);
> - fst->cfg.buckets[THROTTLE_BPS_WRITE].burst_length =
> - qemu_opt_get_number(opts, "throttling.bps-write-max-length", 1);
> - fst->cfg.buckets[THROTTLE_OPS_TOTAL].burst_length =
> - qemu_opt_get_number(opts, "throttling.iops-total-max-length", 1);
> - fst->cfg.buckets[THROTTLE_OPS_READ].burst_length =
> - qemu_opt_get_number(opts, "throttling.iops-read-max-length", 1);
> - fst->cfg.buckets[THROTTLE_OPS_WRITE].burst_length =
> - qemu_opt_get_number(opts, "throttling.iops-write-max-length", 1);
> - fst->cfg.op_size =
> - qemu_opt_get_number(opts, "throttling.iops-size", 0);
> -
> + throttle_parse_options(&fst->cfg, opts);
> throttle_is_valid(&fst->cfg, errp);
> }
>
> diff --git a/include/qemu/throttle-options.h b/include/qemu/throttle-options.h
> index 3528a8f..9709dcd 100644
> --- a/include/qemu/throttle-options.h
> +++ b/include/qemu/throttle-options.h
> @@ -9,6 +9,7 @@
> */
> #ifndef THROTTLE_OPTIONS_H
> #define THROTTLE_OPTIONS_H
> +#include "typedefs.h"
>
> #define QEMU_OPT_IOPS_TOTAL "iops-total"
> #define QEMU_OPT_IOPS_TOTAL_MAX "iops-total-max"
> @@ -111,4 +112,6 @@
> .help = "when limiting by iops max size of an I/O in bytes",\
> }
>
> +void throttle_parse_options(ThrottleConfig *, QemuOpts *);
> +
> #endif
> diff --git a/include/qemu/throttle.h b/include/qemu/throttle.h
> index 8c93237..b6ebc6d 100644
> --- a/include/qemu/throttle.h
> +++ b/include/qemu/throttle.h
> @@ -89,10 +89,10 @@ typedef struct LeakyBucket {
> * However it allows to keep the code clean and the bucket field is reset to
> * zero at the right time.
> */
> -typedef struct ThrottleConfig {
> +struct ThrottleConfig {
> LeakyBucket buckets[BUCKETS_COUNT]; /* leaky buckets */
> uint64_t op_size; /* size of an operation in bytes */
> -} ThrottleConfig;
> +};
>
> typedef struct ThrottleState {
> ThrottleConfig cfg; /* configuration */
> diff --git a/include/qemu/typedefs.h b/include/qemu/typedefs.h
> index 39bc835..90fe0f9 100644
> --- a/include/qemu/typedefs.h
> +++ b/include/qemu/typedefs.h
> @@ -100,6 +100,7 @@ typedef struct uWireSlave uWireSlave;
> typedef struct VirtIODevice VirtIODevice;
> typedef struct Visitor Visitor;
> typedef struct node_info NodeInfo;
> +typedef struct ThrottleConfig ThrottleConfig;
> typedef void SaveStateHandler(QEMUFile *f, void *opaque);
> typedef int LoadStateHandler(QEMUFile *f, void *opaque, int version_id);
>
> diff --git a/util/throttle.c b/util/throttle.c
> index 06bf916..9ef28c4 100644
> --- a/util/throttle.c
> +++ b/util/throttle.c
> @@ -27,6 +27,7 @@
> #include "qemu/throttle.h"
> #include "qemu/timer.h"
> #include "block/aio.h"
> +#include "qemu/throttle-options.h"
>
> /* This function make a bucket leak
> *
> @@ -635,3 +636,54 @@ void throttle_config_to_limits(ThrottleConfig *cfg,
> ThrottleLimits *var)
> var->has_iops_write_max_length = true;
> var->has_iops_size = true;
> }
> +
> +/* parse the throttle options
> + *
> + * @opts: qemu options
> + * @throttle_cfg: throttle configuration
> + */
> +void throttle_parse_options(ThrottleConfig *throttle_cfg, QemuOpts *opts)
> +{
> + throttle_config_init(throttle_cfg);
> + throttle_cfg->buckets[THROTTLE_BPS_TOTAL].avg =
> + qemu_opt_get_number(opts, "throttling.bps-total", 0);
> + throttle_cfg->buckets[THROTTLE_BPS_READ].avg =
> + qemu_opt_get_number(opts, "throttling.bps-read", 0);
> + throttle_cfg->buckets[THROTTLE_BPS_WRITE].avg =
> + qemu_opt_get_number(opts, "throttling.bps-write", 0);
> + throttle_cfg->buckets[THROTTLE_OPS_TOTAL].avg =
> + qemu_opt_get_number(opts, "throttling.iops-total", 0);
> + throttle_cfg->buckets[THROTTLE_OPS_READ].avg =
> + qemu_opt_get_number(opts, "throttling.iops-read", 0);
> + throttle_cfg->buckets[THROTTLE_OPS_WRITE].avg =
> + qemu_opt_get_number(opts, "throttling.iops-write", 0);
> +
> + throttle_cfg->buckets[THROTTLE_BPS_TOTAL].max =
> + qemu_opt_get_number(opts, "throttling.bps-total-max", 0);
> + throttle_cfg->buckets[THROTTLE_BPS_READ].max =
> + qemu_opt_get_number(opts, "throttling.bps-read-max", 0);
> + throttle_cfg->buckets[THROTTLE_BPS_WRITE].max =
> + qemu_opt_get_number(opts, "throttling.bps-write-max", 0);
> + throttle_cfg->buckets[THROTTLE_OPS_TOTAL].max =
> + qemu_opt_get_number(opts, "throttling.iops-total-max", 0);
> + throttle_cfg->buckets[THROTTLE_OPS_READ].max =
> + qemu_opt_get_number(opts, "throttling.iops-read-max", 0);
> + throttle_cfg->buckets[THROTTLE_OPS_WRITE].max =
> + qemu_opt_get_number(opts, "throttling.iops-write-max", 0);
> +
> + throttle_cfg->buckets[THROTTLE_BPS_TOTAL].burst_length =
> + qemu_opt_get_number(opts, "throttling.bps-total-max-length", 1);
> + throttle_cfg->buckets[THROTTLE_BPS_READ].burst_length =
> + qemu_opt_get_number(opts, "throttling.bps-read-max-length", 1);
> + throttle_cfg->buckets[THROTTLE_BPS_WRITE].burst_length =
> + qemu_opt_get_number(opts, "throttling.bps-write-max-length", 1);
> + throttle_cfg->buckets[THROTTLE_OPS_TOTAL].burst_length =
> + qemu_opt_get_number(opts, "throttling.iops-total-max-length", 1);
> + throttle_cfg->buckets[THROTTLE_OPS_READ].burst_length =
> + qemu_opt_get_number(opts, "throttling.iops-read-max-length", 1);
> + throttle_cfg->buckets[THROTTLE_OPS_WRITE].burst_length =
> + qemu_opt_get_number(opts, "throttling.iops-write-max-length", 1);
> +
> + throttle_cfg->op_size =
> + qemu_opt_get_number(opts, "throttling.iops-size", 0);
> +}
pgpJwTaYQ3lEf.pgp
Description: OpenPGP digital signature
- Re: [Qemu-devel] [PATCH v11 2/6] qmp: Use ThrottleLimits structure, (continued)
[Qemu-devel] [PATCH v11 6/6] fsdev: hmp interface for throttling, Pradeep Jagadeesh, 2017/09/14
[Qemu-devel] [PATCH v11 1/6] throttle: factor out duplicate code, Pradeep Jagadeesh, 2017/09/14
[Qemu-devel] [PATCH v11 5/6] fsdev: QMP interface for throttling, Pradeep Jagadeesh, 2017/09/14
[Qemu-devel] [PATCH v11 4/6] hmp: create a throttle initialization function for code reuse, Pradeep Jagadeesh, 2017/09/14